IT and electronics

36,327 products in DB
ImageNameSummaryCategories
Salt Spray Test | Salt Spray Test Chamber

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. Salt spray test chamber is to assess the corrsion resistance of materials and coatings. This type of test is important for various industries to ensure the durability and reliability of products, especially those exposed to harsh environmental conditions, such as marine environmentals, automotives settings, or industrial applications.

Dustproof Testing Machine | Dust Proof Chamber

SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions. Verify whether the performance of the product meets the requirements through verification after the measurement, so as to facilitate the design, improvement, verification and factory inspection of the product. , DIN40050 and IP5K0. The dust test chamber is applicable to the IP5X and IP6X dustproof test.

IP Waterproof Test Equipments

The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

Temperature Humidity Chamber | Thermal Chamber

Temperature Humidity Chamber | Thermal Chamber | Climate Chamber simulate different climatic conditions, such as heat-endurance, cold endurance, dryness-endurance and humidity-endurance which defines the performance of material.  By testing the product under different climatic conditions to see whether its performance can meet the intended requirements. It is widely used to test the CFL/LED, electricity products, automative cars, home appications and mobiles. This series of aging test chamber is suitable for the reliability test of industrial products. It has the characteristics of temperature control precision and wide control range.

Needle Flame Test

According to IEC60695-2-2, IEC60695-11-5, IEC62368-1 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material.

Glow-wire Test Apparatus

The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471.

Surge Generator

The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) .

How does a surge generator work?
The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. It fully meets the IEC 61000-4-5EN61000-4-5 and GB/T17626.5 standards.

The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) .

How does a surge generator work?
The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. It fully meets the IEC 61000-4-5EN61000-4-5 and GB/T17626.5 standards.

ESD Simulator Guns

ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2EN61000-4-2ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322.

EMI Test Receiver

EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is made of full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KB fully meets CISPR15:2018CISPR16-1GB17743, FCC, EN55015 and EN55022.

LED Power Driver Tester

LS2090 LED Power Driver Test Instrument is the comprehensive test instrument for LED driver power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: input (AC&DC), output (AC&DC), output start (DC), harmonic and displacement factor (DF).

Lamp Start, Run-up Time and Flicker Test System

LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer – Flicker Tester is equipped with Class A photo detector, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC, Energy Star V2.1IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST, CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC, SASO2902COMMISSION DELEGATED REGULATION (EU) 2019/2015COMMISSION REGULATION (EU) 2019/2020 and IEC60969 “Self-ballasted Lamps for General Lighting Services—Performance Requirements” and other requirements. The LSRF-3 can connects with PC via USB cable. The English version software can be run in Win7, Win8 and Win10, Win11 (The driver was Certificated by Microsoft)

High Precision Spectroradiometer Integrating Sphere System

LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177CIE84,  CIE-13.3IES LM-79-19Optical-Engineering-49-3-033602COMMISSION DELEGATED REGULATION (EU) 2019/2015IESNA LM-63-2IES-LM-80 and ANSI-C78.377, it recommends to using an array spectroradiometer with an integrating sphere to test SSL products. The LPCE-2 system is applied with LMS-9000C High Precision CCD Spectroradiometer or LMS-9500C Scientific Grade CCD Spectroradiometer, and a-molding integrating sphere with holder base. This sphere is more round and the test result is more accruate than the traditional integrating sphere.

CCD Spectroradiometer Integrating Sphere Compact System

LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires’ photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177CIE84,  CIE-13.3COMMISSION DELEGATED REGULATION (EU) 2019/2015IES LM-79-19Optical-Engineering-49-3-033602IESNA LM-63-2ANSI-C78.377 and GB standards

Portable CCD Spectroradiometer

The Portable CCD LED Colorimeter Spectroradiometer Fully meets CIE 177,  CIE-13.3 ,  Optical-Engineering-49-3-033602, and IEEE.

High Precision Rotation Luminaire Goniophotometer

LSG-1890B/LSG-1800A goniophotometer is automatic goniophotometric instrument for luminous intensity distribution measurements with facility for rotating the light source. The LSG-1890B/LSG-1800A uses a constant temperature detector, Japanese motor and German precision angle coder which keep the test results with high accuracy. It is used for industrial laboratory photometric data measurement of all kinds of luminaries such as LED luminaries, HID lamps, fluorescent lamps and so on.

LM-79 Moving Detector Goniophotometer (Mirror Type C)

LSG-6000 gonio photometer manufacturer is LISUN, it can measure all types of lighting sources, LED, Plant Lighting or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.

Baking equipment deck ovens for bread and pastries

Our company has 32-year rich experience of exporting all over the world. Customers are very satisfied with our quality and service, this is also what our firm has been pursuing

500W portable power station

Rated power: 500W

Rated capacity: 500wh

Standard capacity: 3.7V140400mAh

Lighting powerline controller / control cabinet

Unilight master controller monitors the condition of the meter and low-voltage discrete inputs and also controls contactors used for switching any power circuit.
Controller has an autonomous power supply, responds swiftly to commands from the work station, is able to connect to external extension modules and work with two SIM cards from different providers.
Master controllers can work with OLCC Unilight or with an existing power equipment. MQTT protocol
allows it to adapt to various systems.

SOLID STATE DRIVE

A Solid State Disk(SSD)is a storage device that is based on semiconductors rather than rotating magnetic platters.

AD8657ARMZ-R7-Micropower Amplifier 

Manufacturer: Analog Devices Inc.

Product Category: Precision Amplifiers

RoHS:Details

Series:AD8657

Number of Channels:2 Channel

GBP – Gain Bandwidth Product:230 kHz

SR – Slew Rate:80 mV/us

CMRR – Common Mode Rejection Ratio:110 dB

PLC IoT gateway

IoT RTU, IoT Gateway, Industrial celluar router, Ethernet I/O module, LoRa gateway etc.

Autel Automotive Diagnostic Tools

Autel MaxiCOM MK808 OBD2 Scanner Diagnostic Auto Tool OBD 2 Automotive Code Reader Tester ODB2 Key Programmer Immobilizer same as MX808

 

Support 12 Kinds of Languages

English, German, Spanish, Japanese,Portuguese, Dutch, French, Italian, Korean, Russian, Polish,Swedish for optional

Autel MaxiCOM MK808 is an advanced tablet scan tool based on the Android operating system. Consist of MD802 and Mexicheck pro, this obd2 scanner’s advantages not only lie in its comprehensive functions including Full systems diagnoses, all obd2 functions, various reset features (Oil reset, EPB/SAS/BMS/TPMS/DPF reset), but it its excellent performance in advanced hardware, faster and more accurate diagnosis.

Fashion style phone case, personality phone cover, privacy phone screen

Material:  TPU+PC

Feature:  airbag shockproof, anti-fall, anti-scraftch, flexible, transparent high definition. Automatic magnetic alignment with Magsafe Charger

Bitmain Antminer S19

Application:Desktop

Item Condition:PCI Express 2.0 X16

Outputs:DVI

Cooler Type:Fan

Products Status:Used, New

Place of Origin:China

Earthing system elements

Earthing Systems

In electricity terms, earthing is connecting a conductive element to the ground via a conductive path.

Protective Earthing
Protective earhing (RA) is earthing of metal parts -that do not carry voltage under normal operation but may carry voltage due to a fault- in order to protect people or other living things against hazardous touch or step voltage.
In a low resistance protective earthing, a fault voltage is fed through the faulty circuit during the fault, therefore enabling the breakers to
instantly break the circuit and therefore cut the energy on the faulty circuit.

Operational and Functional Earthing
Operational Earthing (RB) is the earthing of the voltage of active parts of operational devices of an electrical facility that are under voltage
against earth in attempt to keep at a specific value (e.g. star point earthing)
Functional Earthing (RF) is earthing of a communication facility or an operational device in order to resume the desired function.

Wire mesh cable tray

Wire Mesh Cable Tray

Wire mesh cable trays are preferred for carrying low voltage, communication and fiber optic cables inside the building. Due to its low surface area, it does not accumulate dust on it, so its use is especially common in food industry and tobacco industry. As coating type, it is being used as a static paint over black sheet or galvanized sheet. It is also preferred as 304 and 316 quality stainless. Electrogalvanized coating type is used widely in Turkey.

Solar steel structures

We are a steel structure producer for many international solar EPC contractors. We mainly produce their steel profiles as an OEM manufacturer.

 

We produce the following profile types.

C Profile

C+ Profile

Z Profile

U Strut

Purlin Profile

Binder Profile

Omega Profile

 

Our machinery capacity is as follows;

3 roll forming machines

1 Fiber Laser cutting  2*6 meters

Bending machines 12 meters

Outsourcing galvanizing zinc facilities

Our capacity is 1.500 tons / month

Cable ladder

Cable Ladders

Cable ladders; It is a widely preferred product in industrial plants and vertical use. It is important in cable ladders in terms of the load it will carry with the distance between the support as in other support systems. Rug spacing is usually 300mm. Cable ladders are also used in aluminum and 304-316 quality stainless material. It is lighter and more durable than cable trays. Height sizes are generally preferred as 100mm and 150mm.

Cable tray

Cable Trays

Cable Trays is the type of product that is the most common use among cable support system. Cable trays and accessories, which are indispensable for electrical installations, offer both functional and decorative solutions. The fact that electrical cables are very costly and important for structures requires the use of these materials within the standards.

While standard type cable trays are preferred in low and medium voltage electrical installations, Heavy Duty cable trays are preferred in medium and high voltage installations because they are more powerful and useful. Heavy duty cable trrays, due to the bends at the edges and made of thicker material, are more resistant to the type cable ducts than standard type. These folds increase the strength of the product while offering better quality use.

car camera car monitor

For car cameras ,we have got many popular models ,like the turtle camera ET-388,butterfly car camera ET-688 and also 2 in 1 camera

ET-588 set ,which are hot selling models all over the market .Except that ,we still have LED and IR camera like ET-489LED and ET-388IR ,

which helps you get a good night vision when you drive in the night .And also ,car license plate cameras we also sold a lot to American

market ,like our model ET-3688 and ET-3988 .Meanwhile ,we also have moving line cameras like our model ET-389M ,the principle is

according to the G-sensor ,when your steeling wheel turned direction ,the trajectory line will move with your direction ,which helps you

better parking .AHD camera ,CVBS camera or AHD&CVBS transform camera ,wide angle 190° camera ,one ,two or three control cable

cameras ,we can make it according to your requirements .All of the cameras are high resolution ,waterproof ,high and low temperature

resist ,which approved by ISO ,CE ,EMC and Rohs certifications .Free samples can be provided for evaluation !

Extruded Profiles for Heatsink

High quality, high density fins design
Customized fin height and width supported

Sniper M2 coffee roaster

Sniper M2

Brand Kaleido

Product origin China

Delivery time 1-3days

Shipping time 5-7days

Additional contact with opening before the main contacts OptiSwitch D-4 (2NO + 2NC)
Rechargeable battery

10Ah 12Ah 17Ah 20Ah 24Ah 30Ah 40Ah 12V 24V 36V 48V 60V 72V Lifepo4 Deep Cycle 18650 Li-ion Li Lithium ion Rechargeable Battery

 

 

10Ah 12Ah 17Ah 20Ah 24Ah 30Ah 40Ah 12V 24V 36V 48V 60V 72V Lifepo4 Deep Cycle 18650 Li-ion Li Lithium ion Rechargeable Battery

 

12V 24V 36V 48V 72V 96V 7Ah 9Ah 14Ah 18Ah 45Ah 50Ah 60Ah 65Ah 70Ah 80Ah Lifepo4 China Lithium ion iron Phosphate Battery Price

 

3.7v 7.4v 12v 14.8v 22.2v 24v 72v 300mah 1020mah 5000mah 6000mah 8000mah 20000mah 22000mah 2s 4s 5s 12s lipo battery pack

 

18650 3.7v 1800mah 2000amh 2200mah 2600mah 3000amh li ion cylindrical cell rechargeable lithium ion battery

 

12V 24V 36V 48V 60V 72V 96V 11.6Ah Electric Bike Bicycle 52V 20Ah Ebike Ev Li-ion Lithium ion 18650 Battery Pack For Ebike

STMicroelectronics STL18N65M5 Discrete Semiconductor Transistors

STMicroelectronics STL18N65M5 Discrete Semiconductor Transistors

Welcome to Request Quote at https://www.utmel.com/rfq

STMicroelectronics TS951ILT Semiconductors Precision Amplifiers ICs

STMicroelectronics TS951ILT Semiconductors Precision Amplifiers ICs

Welcome to Request Quote at https://www.utmel.com/rfq

 

STMicroelectronics STTH3R06U Discrete Semiconductor Transistors

STMicroelectronics STTH3R06U Discrete Semiconductor Transistors

Welcome to Request Quote at https://www.utmel.com/rfq

STMicroelectronics ST62T60CB6 Integrated Circuits(ICs)

STMicroelectronics ST62T60CB6 Integrated Circuits(ICs)

Welcome to Request Quote at https://www.utmel.com/rfq

Panasonic Electronic Components EEE-FPJ101UAR Aluminum Electrolytic Capacitors

Panasonic Electronic Components EEE-FPJ101UAR Aluminum Electrolytic Capacitors

Welcome to Request Quote at https://www.utmel.com/rfq

Panasonic Electronic Components EEE-FC1E330P Aluminum Electrolytic Capacitors

Panasonic Electronic Components EEE-FC1E330P Aluminum Electrolytic Capacitors

Welcome to Request Quote at https://www.utmel.com/rfq

Yageo MFR-25FBF52-221R Through Hole Resistors

Yageo MFR-25FBF52-221R Through Hole Resistors

Welcome to Request Quote at https://www.utmel.com/rfq

Ohmite TCH35P33R0JE Through Hole Resistors

Ohmite TCH35P33R0JE Through Hole Resistors

Welcome to Request Quote at https://www.utmel.com/rfq

Module MT1-630-28-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Charging and rectifying devices of the VAZP-MT series

The VAZP-M series charging and recharging rectifier unit is designed: 1) for charging serviced and low-maintenance lead-acid storage batteries and sealed lead-acid storage batteries with gas recombination; 2) for keeping AB in trickle charge mode; 3) parallel operation with battery for the load; 4) to power the load when the battery is disconnected; 5) for installation in DC switchboards. The VAZP-M series charging and recharging rectifier unit is intended: 1) for charging serviced and low-maintenance lead-acid batteries and sealed lead-acid storage batteries with gas recombination; 2) for keeping the battery in constant trickle charge mode; 3) parallel operation with the battery for the load; 4) for powering the load when the battery is disconnected; 5) for installation in DC switchboards. "Operating according to the IU-characteristic, provides power to consumers and at the same time charges the battery. power supply of consumers for a specified time, after the recovery of the voltage in the supply network, the rectifier unit switches to the battery charging mode while simultaneously feeding the consumers. Advantages: • Automatic two-level charge for all types of batteries; • Manual equalizing charge for battery maintenance; • Output voltage adapted to battery, output voltage stabilization is not worse than ± 0.5% • Battery capacity test Tech. specifications Main performance characteristics: Input voltage (V) 220/380 Input voltage deviation (%) ± 15 Frequency (Hz) 47-63 Output voltage (V) 110, 220 Maximum output current (A) 400 or more Voltage regulation (%) ± 0.5 50-100% load (%) 93 Operating temperature (о C) from 0 to 40 Model range "VAZP-M" No. Type Maximum output current, A Rated output voltage, V Overall dimensions, no more than, mm No. Type Maximum output current, A Rated output voltage, V Overall dimensions, no more, mm Weight, no more than, kg 1VAZP-MT 25.1102VAZP-MT 40.1103VAZP-MT 60.1104VAZP-MT 80.1105VAZP-MT 100.1106VAZP-MT 150.1107VAZP-MT 200.1108.2VAZP-MT20.2 MT 60.22011 VAZP-MT 80.22012 VAZP-MT 100.22013 VAZP-MT 150.22014 VAZP-MT 200.22015 VAZP-MT 300.22016 VAZP-MT 400.220172 x VAZP-MT 25.220 182 x VAZP-MT 40.220192 x 60.220P-MT.2

Fire detector IP-212-3SU

Fire detector IP-212-3SU (RP21) 2008. Differential pressure gauge DMEU-MI 400 / 5-0 2010, new from storage sale.www.dzmd.ru

SNTs146

These connectors with local protection of contacts designed for use in DC, AC(frequency up to 3MHz) at voltage to 700V(as peak).Plugs(sockets) equipment and cable mounted are manufactured in shielded(SNTs 146Э) and unshielded version(SNTs 146).Equipment mounted connectors can be manufactured with the contacts for printed circuit board.Equipment and cable mounted parts of the connector is manufactured w/o backshell,with straight (closed,opened) and angled backshell.Body parts are manufactured from stainless steel with current conductive coating .Threaded connection with self locking device with visual indication of coupling ending. Contact plating: goldThe contcts are removables assigned for crimping for three dimensional(point-to-point) wiring and for solding mount for printed-circuit wiring, in hermetic plug the contacts assigned for solding.Plugs,sockets of SNTs 146 and SNTs 146G type are mated with the connectors of 983Series under MIL-C-83723 and SNTs 147 manufactured in compliance with TsSNK 430421.011TU.These connectors w/o backshell or with backshell(metallic or plastic) with conductive or nonconductive coating.These connectors are intended for internal wiring and are modified for operation in all climatic areas in compliance with Technical Specifications NKTsS.434410.505TU. Тех. спецификации Technical specificationsTotal number of contacts: 12, 14, 31, 41, 61Operational current per contact from, A: 1, 5Operational current per contact to, A: 2, 5Peak operating voltage,V: 700Plug(male) or socket(female): Plug(male) ,socket(female)Equipment(fixed) or cable mounted(free): Equipment mounted, cable mountedСonnector rear design: W/o junction pipeHermetic or nonhermetic: HermeticShielded or unshielded: ShieldedType of mating: Thereaded connectionNumber of mating: 1000Operating ambient temperature from, °C: -60Operating ambient temperature to, °C: 155Method of wiring: Three-dimensional(point-to-point), solder mount, by crimping(the contacts)Wiring: InternalHermetic, air leakage allowed or not allowed: Not allowed

SNTs146

These connectors with local protection of contacts designed for use in DC, AC(frequency up to 3MHz) at voltage to 700V(as peak).Plugs(sockets) equipment and cable mounted are manufactured in shielded(SNTs 146Э) and unshielded version(SNTs 146).Equipment mounted connectors can be manufactured with the contacts for printed circuit board.Equipment and cable mounted parts of the connector is manufactured w/o backshell,with straight (closed,opened) and angled backshell.Body parts are manufactured from stainless steel with current conductive coating .Threaded connection with self locking device with visual indication of coupling ending. Contact plating: goldThe contcts are removables assigned for crimping for three dimensional(point-to-point) wiring and for solding mount for printed-circuit wiring, in hermetic plug the contacts assigned for solding.Plugs,sockets of SNTs 146 and SNTs 146G type are mated with the connectors of 983Series under MIL-C-83723 and SNTs 147 manufactured in compliance with TsSNK 430421.011TU.These connectors w/o backshell or with backshell(metallic or plastic) with conductive or nonconductive coating.These connectors are intended for internal wiring and are modified for operation in all climatic areas in compliance with Technical Specifications NKTsS.434410.505TU. Тех. спецификации Technical specificationsTotal number of contacts: 12, 14, 31, 41, 61Operational current per contact from, A: 1, 5Operational current per contact to, A: 2, 5Peak operating voltage,V: 700Plug(male) or socket(female): Plug(male) ,socket(female)Equipment(fixed) or cable mounted(free): Equipment mounted, cable mountedСonnector rear design: W/o junction pipeHermetic or nonhermetic: HermeticShielded or unshielded: ShieldedType of mating: Thereaded connectionNumber of mating: 1000Operating ambient temperature from, °C: -60Operating ambient temperature to, °C: 155Method of wiring: Three-dimensional(point-to-point), solder mount, by crimping(the contacts)Wiring: InternalHermetic, air leakage allowed or not allowed: Not allowed

Set of decking for the construction of level crossings.

Railroad crossing is a place of direct intersection of railway rails and a road or any other road. To ensure a single-level, safe and comfortable crossing of roads at a railway crossing, rubber floorings are used. Railway floorings have the following properties: they are excellent in repelling water, increase the coefficient of adhesion of the wheels of transport with a railway crossing, are resistant to freezing; they take shock loads well, dampen vibration (partially) ; fit tightly to the railway tracks, preventing the ingress of dirt on the rails. Rubber decks are designed for operation in various climatic conditions. Rubber coatings for level crossings are made with the expectation of long-term operation under severe loads and loads in the temperature range from -40 ° C to + 60 ° C. The permissible load from a car wheel is up to 4.5 tons. The service life of railway flooring is about 25 years. The railway flooring, consisting of monolithic rubber-cord-based plates, fixed to each other in a closed loop, is a rubber-cord flooring. The width of the rubber-cord flooring is a multiple of 545 mm. Level crossing slabs are suitable for the R-65 rail, the pitch of wooden or reinforced concrete sleepers is 545 mm. Slabs for rubber-cord decking are manufactured in accordance with TU 32TsP828-97. There is no ice crust on the plates, the rubber plate reduces shock loading, dampens vibrations. This rubber-cord flooring for railway crossings is an excellent combination of simple design, affordable price and long-term operation. Those. specifications Set of railroad decks with fastening KB 6.5 m wide (10 pieces included) Completeness of one decking: Internal plate OP 467.001 – 12 pcs. External plate OP 467.002 – 24 pcs. Internal insert 202.01-VN-SKI-01-04 – 24 pcs. External insert 202.01-VN-SKI-01-08 – 24 pcs. Fasteners – 1 set

Gatekeeper 03

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; contactless interface (PayWave, PayPass) – OPTIONAL The front panel is equipped with a skimming pad detection sensor – OPTIONAL Maximum number of external connected circuits (elements): power line; 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 01

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; The minimum number of external connected circuits (elements): power line; external blocking line; lock; exit button; Programmable during production 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 03

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; contactless interface (PayWave, PayPass) – OPTIONAL The front panel is equipped with a skimming pad detection sensor – OPTIONAL Maximum number of external connected circuits (elements): power line; 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 02

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; Increased number of external connected circuits (elements): power line; external blocking line; customer presence sensor line in the ATM area; lock; exit button; 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 01

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; The minimum number of external connected circuits (elements): power line; external blocking line; lock; exit button; Programmable during production 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gas analyzer of explosive gases and vapors multichannel SIGMA-1M

The installation and use of gas analyzers is necessary in accordance with the fire safety rules for the operation of chemical industry enterprises, the general explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refineries, and the requirements for the installation of alarms and gas analyzers. The stationary gas analyzer Sigma-1M is specially designed and used where constant monitoring is required. content of vapors of explosive compounds in air or nitrogen atmosphere. Gas analyzer Sigma-1M with convection supply of a controlled environment is designed for automatic measurement and control of pre-explosive concentrations of explosive gases and vapors with the formation of emergency light, sound and control signals when the concentration of the controlled gas exceeds a specified level. , B-Ia and B-Id according to the explosion protection marking ("[Exib] IIB" for the panel and "1ExibdIIBT4 X" for the sensors) and in accordance with the Operation Manual. The device is used in industrial plants where gas leakage or evaporation of flammable liquids is possible. These are gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

Gas analyzer of explosive gases and vapors multichannel SIGMA-1M

The installation and use of gas analyzers is necessary in accordance with the fire safety rules for the operation of chemical industry enterprises, the general explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refineries, and the requirements for the installation of alarms and gas analyzers. The stationary gas analyzer Sigma-1M is specially designed and used where constant monitoring is required. content of vapors of explosive compounds in air or nitrogen atmosphere. Gas analyzer Sigma-1M with convection supply of a controlled environment is designed for automatic measurement and control of pre-explosive concentrations of explosive gases and vapors with the formation of emergency light, sound and control signals when the concentration of the controlled gas exceeds a specified level. , B-Ia and B-Id according to the explosion protection marking ("[Exib] IIB" for the panel and "1ExibdIIBT4 X" for the sensors) and in accordance with the Operation Manual. The device is used in industrial plants where gas leakage or evaporation of flammable liquids is possible. These are gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

SIGMA-1M sensor with optical channel

Controlled gases and vapors: methane, propane, butane, pentane, hexane, propylene, cyclopentane, vapors of gasoline, kerosene, diesel fuel, white spirit, jet fuel, aviation gasoline, aviation fuel. Gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

SIGMA-1M sensor with optical channel

Controlled gases and vapors: methane, propane, butane, pentane, hexane, propylene, cyclopentane, vapors of gasoline, kerosene, diesel fuel, white spirit, jet fuel, aviation gasoline, aviation fuel. Gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

Gas analyzer of explosive gases and vapors multichannel SIGMA-1M

The installation and use of gas analyzers is necessary in accordance with the fire safety rules for the operation of chemical industry enterprises, the general explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refineries, and the requirements for the installation of alarms and gas analyzers. The stationary gas analyzer Sigma-1M is specially designed and used where constant monitoring is required. content of vapors of explosive compounds in air or nitrogen atmosphere. Gas analyzer Sigma-1M with convection supply of a controlled environment is designed for automatic measurement and control of pre-explosive concentrations of explosive gases and vapors with the formation of emergency light, sound and control signals when the concentration of the controlled gas exceeds a specified level. , B-Ia and B-Id according to the explosion protection marking ("[Exib] IIB" for the panel and "1ExibdIIBT4 X" for the sensors) and in accordance with the Operation Manual. The device is used in industrial plants where gas leakage or evaporation of flammable liquids is possible. These are gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

LookOut Compact

Satellite beacon LookOut Compact is designed to determine the coordinates of the location of a moving object anywhere in the world. In order to save energy, the product is capable of keeping an archive and communicating at the appointed time for data transmission. Included with the Lookout product, the user gets access to a Web service, with which he can track his current location, as well as see the route to follow for the selected time intervals and technological parameters. Features: – binding the device to the Web service http://lookout.ss24h.com (information on operation is available in the "Help" service section); – complete autonomy (no external power supplies are required); – provision of autonomous operation from an internal power source at least a year (with the default communication settings and using the recommended batteries); – determining the current position in the GPS / Glonass positioning system with an accuracy of ± 3 m; – maintaining an archive of technological parameters; – built-in temperature sensor; – data transmission via a satellite communication channel Iridium (SBD protocol) or GSM channel; – small dimensions. Those. specifications Input voltage: 7..24 V Batteries used: Type AAA 5 pcs Consumption Receiving coordinates: 9mA, Receiving: 40mA, Transmitting: 0.75A, "Sleep" mode: 20μA External memory size: 16 Mb, 5000 points Satellite communication characteristics Communication channel: Iridium (SBD) Frequency range: 1621 MHz Coverage: Global, 100% coverage of the Earth Communication session duration: Not more than 2 minutes The volume of transmitted data per day (at a frequency of obtaining coordinates 1 time in 10 minutes): 750 bytes GPS / GLONASS module characteristicsPosition determination time: From 4- x seconds Positioning accuracy: Not more than 10 meters GSM communication characteristics GPRS communication channel: 10 class Communication standard: GSM 900/1800 Number of SIM chips: 2 General characteristics Sheath protection degree: IP40 Operating temperature: -40 ° C .. + 60 ° C Weight: 0.4 kg (without batteries) Dimensions: 160х110х37 mm

ANTENNA TV "SIRIUS 2.0"

Indoor antenna "Sirius 2.0" is designed to receive television programs in the range of 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels and provides a high-quality image in the area of stable television reception. The Sirius 2.0 housing is made of modern high-tech materials with high strength and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where there is no such broadcasting yet, viewers will be able to watch all analog broadcasting channels available on the air. "Sirius 2.0" is supplied in modern bright full-color packaging made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: TV antenna of UHF range Antenna placement: Indoor Gain, max., dBi, 21-69 channel: 5 Impedance: 75 Amplifier: no Power supply: no Cable length: 2 Dimensions assembled (without attachment point), mm: 270х350х120 Weight, no more: 0.39 Dimensions in packing: 250x235x80 Weight in packing, kg: 0.56

ANTENNA TV "SIRIUS 2.0"

Indoor antenna "Sirius 2.0" is designed to receive television programs in the range of 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels and provides a high-quality image in the area of stable television reception. The Sirius 2.0 housing is made of modern high-tech materials with high strength and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where there is no such broadcasting yet, viewers will be able to watch all analog broadcasting channels available on the air. "Sirius 2.0" is supplied in modern bright full-color packaging made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: TV antenna of UHF range Antenna placement: Indoor Gain, max., dBi, 21-69 channel: 5 Impedance: 75 Amplifier: no Power supply: no Cable length: 2 Dimensions assembled (without attachment point), mm: 270х350х120 Weight, no more: 0.39 Dimensions in packing: 250x235x80 Weight in packing, kg: 0.56

TV ANTENNA «REMO BAS-5304 VIVA»

The indoor window television antenna active "Viva" is designed to receive television broadcasts in the MW and UHF bands in the analog and digital broadcasting standard. Has a built-in low-noise amplifier with adjustable gain, which allows you to significantly improve reception in urban and near suburbs. Indoor antenna with outdoor capabilities! The effect is achieved by attaching to the window glass. Those. Specifications Antenna Placement: Indoor Antenna Type: All Wave TV Antenna Gain, Max, dBi, Channel 1-5: 42 Gain, Max, dBi, Channel 6-12: 42 Gain, Max, dBi, Channel 21-69: 42 Supply Voltage , V: 12 Wave impedance, Ohm: 75 Cable length, m: 1.8 Amplifier: yes Power supply unit: yes Weight, no more, kg: 0.36 Dimensions in packing, mm: 345х170х50

TV ANTENNA «REMO BAS-5302»

"REMO BAS-5302" is an active small-sized indoor antenna designed to work with television programs in the MW and UHF bands. Provides optimal reception of signals of analog MV / UHF and digital television formats DVB-T / DVB-T2. The antenna is equipped with a built-in amplifier and has the ability to adjust the gain of the TV signal. The antenna is supplied in a bright full-color box. Those. Specifications Antenna Placement: Indoor Antenna Type: All Wave TV Antenna Gain, Max, dBi, Channel 1-5: 31 Gain, Max, dBi, Channel 6-12: 31.5 Gain, Max, dBi, Channel 21-69: 33.5 Amplifier type: USSH-2A-DX Supply voltage, V: 12 Wave impedance, Ohm: 75 Cable length, m: 1.2 Amplifier: yes Power supply unit: yes Weight, not more, kg: 0.35 Dimensions in packing, mm: 285x250x120 Weight in packing, kg: 0.5

TV ANTENNA "REMO BAS 5301 DAWN DIGITAL"

The active television small-sized indoor antenna "Zarya Digital" is designed to receive television programs in the MW and UHF bands. The antenna receives signals of analogue television and digital television of the DVB-T / DVB-T2 formats. The Zarya Digital antenna works in the zone of reliable reception. The range and quality of reception depends on the location of the antenna, the power of the transmitter, the distance to it, the terrain and a number of other factors. The antenna has the ability to adjust the gain of the TV signal. The antenna is supplied in a full color box. Those. Specifications Antenna Placement: Indoor Antenna Type: All Wave TV Antenna Gain, Max, dBi, Channel 1-5: 31 Gain, Max, dBi, Channel 6-12: 31.5 Gain, Max, dBi, Channel 21-69: 33.5 Amplifier type: USSH-2A-DX Supply voltage, V: 12 Wave impedance, Ohm: 75 Cable length, m: 1.8 Amplifier: yes Power supply unit: yes Weight, no more than, kg: 0.55 Dimensions in packing, mm: 280x150x120

TV ANTENNA REMO «BAS-5106 RADAR»

Antenna "REMO BAS-5106 RADAR" is designed to receive television programs in the frequency band 174 … 862 MHz (channels from 6 to 69 MV and UHF). The antenna receives signals of analog and digital television in the DVB-T / DVB-T2 format. The antenna has a built-in amplifier, which can be powered either through a coaxial cable directly from a DVB-T2 digital receiver (receiver) or a TV with a DVB-T2 tuner (if such The antenna is supplied in a full color micro corrugated box. The antennas can be produced in blister packs. Those. specifications Antenna placement: Indoor Antenna type: Broadband TV antenna Gain, max., dBi, 6-12 channel: 15 Gain, max., dBi, 21-69 channel: 26 Supply voltage, V: 5 Impedance, Ohm: 75 Cable length, m: 1.2 Amplifier: yes Power supply unit: no Weight, no more, kg: 0.35 Dimensions in packing, mm: 265x240x35

TV ANTENNA REMO BAS-5340 «TVJET ANT»

Indoor broadband antenna REMO BAS-5340-5V "TVJET ANT" for connection to digital TV broadcasting receivers DVB-T and DVB-T2. The new integrated amplifier achieves high signal reception performance. And the classical log-periodic structure, on which this antenna is based, provides a high-quality image in the area of stable television reception. REMO BAS-5340-5V "TVJET ANT" case is made of modern high-tech materials with high strength and operational safety. The antenna has a modern appearance, while developing it, the realities of today were taken into account – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is made in a classic black color and looks great when paired with black technology. Supplied in a full color micro corrugated box. Those. specifications Antenna type: Broadband TV antenna Antenna placement: Indoor Gain, max., dBi, 6-12 channel: 23 Gain, max., dBi, 21-69 channel: 43 Impedance: 75 Amplifier: yes Power supply: no Power supply, V: 5 Cable length : 1.8 Dimensions in assembly (without attachment point), mm: 270х350х120 Weight, no more: 0.36 Dimensions in packing: 250х235х80 Weight in packing, kg: 0.55

TV ANTENNA «REMO BAS-5121 FOBOS 2.1»

Indoor antenna "Phobos 2.1" is designed to receive television programs in the range of 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels, equipped with a modern low-noise amplifier and provides high-quality images in the area of stable television reception. The Phobos 2.1 housing is made of modern high-tech materials with high durability and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where such broadcasting is not yet available, viewers will be able to watch all analog broadcasting channels available on the air. two versions: powered by a built-in amplifier from a digital receiver or thanks to a USB injector "Phobos 2.1" is supplied in a modern bright full-color package made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: TV antenna of UHF range Antenna placement: Indoor Gain, max., dBi, 21-69 channel: 42 Impedance: 75 Amplifier: Yes Power supply: Yes Supply voltage, V: 12 Cable length: 1.8 Dimensions assembled (without attachment point), mm : 270х350х120 Weight, no more: 0.67 Dimensions in packing: 250х235х80

TV ANTENNA «REMO BAS-5315»

The active indoor all-wave antenna "REMO BAS-5315" specializes in receiving analog and digital (DVB-T and DVB-T2) broadcasting format of television programs in a wide frequency range. Equipped with a built-in amplifier, thanks to which it confidently receives the signal in the room. It is powered by a complete power supply unit. White polymer plastic gives "REMO BAS-5315" a modern look. In addition, the high-tech materials of the case are highly durable and safe to use. The antenna is supplied in a micro-corrugated cardboard package. Those. specifications Antenna type: All-wave TV antenna Antenna placement: Indoor Gain, max., dBi, 6-12 channel: 25 Gain, max., dBi, 21-69 channel: 35 Impedance: 75 Amplifier: Yes Power supply: Yes Supply voltage, V: 12 Cable length : 1.8 Weight, no more: 0.9 Dimensions in packing: 285x235x235

TV ANTENNA «REMO BAS-5320 INTER 2.0»

All-wave terrestrial indoor antenna "Inter 2.0" is designed to receive television programs in the ranges of 1-12 and 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels and has a flexible dipole element for MV channels. The amplifier of the new design is practically not susceptible to the negative influence of interference from switching power supplies of modern household and computer equipment. The "Inter 2.0" case is made of modern high-tech materials with high durability and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where there is no such broadcasting yet, viewers will be able to watch all MV and UHF channels thanks to a flexible dipole element. "Inter 2.0" is delivered in a modern bright full-color packaging made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: All-wave TV antenna Antenna placement: Indoor Gain, max., dBi, 6-12 channel: 34 Gain, max., dBi, 21-69 channel: 42 Impedance: 75 Amplifier: Yes Power supply: Yes Supply voltage, V: 12 Cable length : 1.8 Weight, no more: 0.67 Dimensions in packing: 255x235x80

ADJUSTABLE LOCK TYPE 5 FOR COLLAR L115-140

Material – steelCoating – zinc 6The design of the lock is adjustable by means of a screw-loop in length from 115 to 140 mm, which is convenient for fixing / tightening various elements. Those. Specification Drawing.

ADJUSTABLE LOCK TYPE 4 STAINLESS L80-100 (701)

Material – stainless steel Mating part: straight / L-shaped The design of the lock is adjustable with a screw-loop in length from 80 to 100 mm, which is convenient for fixing / tightening various elements. Those. Specification Drawing.

ADJUSTABLE LOCK TYPE 3 L92-108 (701)

Material – steel Coating – zinc 6 Mating part: straight / L-shaped The design of the lock is adjusted with a screw-loop in length from 92 to 108 mm, which is convenient for fixing / tightening various elements. Those. Specification Drawing.

ADJUSTABLE LOCK TYPE 2 L190-220 (703)

Material – steel Coating – zinc 6 Mating part: straight / L-shaped The design of the lock is adjustable with a screw-loop in length from 190 to 220 mm, which is convenient for fixing / tightening various elements. Those. Specification Drawing.

ADJUSTABLE LOCK TYPE 1 L115-135 (702)

Material – steel Coating – zinc 6 Mating part: straight / L-shaped The design of the lock is adjusted by means of a screw-loop in length from 115 to 135 mm, which is convenient for fixing / tightening various elements. Those. specifications See drawing.

CASTLE II ATV4.406.002-01

Material – steelCoating – zinc 6OST 4G О.440.202-80 – Drawer armature The locking hook prevents spontaneous opening of the lock cover. Those. Specification Drawing.

OST LOCK TYPE 2 ATV4.406.002

Material – steelCoating – zinc 6OST 4G О.440.202-80 – Drawer armature The locking hook prevents spontaneous opening of the lock cover. Those. Specification Drawing.

OST LOCK TYPE 1 ATV4.406.001-03

Material – steelCoating – zinc 6OST 4G О.440.202-80 – Drawer armature The locking hook prevents spontaneous opening of the lock cover. Those. Specification Drawing.

OST LOCK TYPE 1 ATV4.406.001-02

Material – steelCoating – zinc 6OST 4G О.440.202-80 – Drawer armature The locking hook prevents spontaneous opening of the lock cover. Those. Specification Drawing.

OST LOCK TYPE 1 ATV4.406.001-01

Material – steelCoating – zinc 6OST 4G О.440.202-80 – Drawer armature The locking hook prevents spontaneous opening of the lock cover. Those. Specification Drawing.

OST LOCK TYPE 1 ATV4.406.001

Material – steelCoating – zinc 6OST 4G О.440.202-80 – Drawer armature The locking hook prevents spontaneous opening of the lock cover. Those. Specification Drawing.

Souleo

tgtrny

Souleo

hbdrtvqafvfvbfgb

Thyristor T283-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

IGBT MIFA-xx17FA-150N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 150Tjmax [° C]: 175Uisol [B]: 4000Casing: MIFADimensions (width / length) [mm]: 34 / 94http: //www.proton-electrotex.com/ru/ product_in / 1611

IGBT MIFA-xx17FA-100N

The modules are designed for switching high-power loads and for use as part of converters and drives for low and medium power electric motors. Main applications: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · Low total dynamic losses · Low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg up to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 100Tjmax [° C]: 175Uisol [B]: 4000Casing: MIFADimensions (width / length) [mm]: 34/94

IGBT MIFA-xx17FA-075N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 75Tjmax [° C]: 175Uisol [B]: 4000Casing: MIFADimensions (width / length) [mm]: 34/94

IGBT MIFA-xx12FA-200N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1200ICnom [A]: 200Tjmax [° C]: 175Uisol [B]: 4000Case: MIFADimensions (width / length) [mm]: 34 / 94http: //www.proton-electrotex.com/ru/ product_in / 1605

IGBT MIFA-xx12FA-150N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 150 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIFA Dimensions (width / length) [mm]: 34/94

IGBT MIFA-xx12FA-100N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 100 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIFA Dimensions (width / length) [mm]: 34/94

IGBT MIDA-HB17FA-450N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 450Tjmax [° C]: 175Uisol [B]: 4000Case: MIDADimensions (width / length) [mm]: 62/152

IGBT MIDA-HB17FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 300Tjmax [° C]: 175Uisol [V]: 4000Casing: MIDADimensions (width / length) [mm]: 62/152

IGBT MIDA-HB12FA-600N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 600 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIDA Dimensions (width / length) [mm]: 62/152

IGBT MIDA-HB12FA-450N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 450 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIDA Dimensions (width / length) [mm]: 62/152

IGBT MIDA-HB12FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200 ICnom [A]: 200 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIAA Dimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx17FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 300Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx17FA-200N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 200Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx17FA-150N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 150Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx12FA-400N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200ICnom [A]: 400Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx12FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200 ICnom [A]: 300 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIAA Dimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx12FA-200N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200 ICnom [A]: 200 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIAA Dimensions (width / length) [mm]: 61.4 / 106.4

Diode D133-630

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 630Tc: 133UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 1978U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 0.350 Tjmax [° C]: 175Rthjc [° C / W]: 0.0400 Body: D.B2 Version: tablet type Type: rectifier

Diode D056-9500

Welding diodes (boxed and unpackaged) are mainly used in resistance welding machines where high currents are required. A feature of the operation of diodes in welding machines is short-term cycles of passing current pulses, leading to the heating of the semiconductor structure, and then its further cooling, associated with restrictions on the time of continuous operation of welding machines ("heating – cooling" mode). Those. specifications URRM [V min] [V min]: 200URRM [V max] [V max]: 400IFAV [A]: 11814Tc: 85UFM (Tc = 25 ° C) [V]: 1.08IFM (Tc = 25 ° C) [A]: 6300U (TO) / Tjmax [V]: 0.74rT / Tjmax [mΩ]: 0.030 Tjmax [° C]: 180Rthjc [° C / W]: 0.0050 Body: ——– —- Execution: tablet Type: welding

D053-7100

Welding diodes (boxed and unpackaged) are mainly used in resistance welding machines where high currents are required. A feature of the operation of diodes in welding machines is short-term cycles of passing current pulses, leading to the heating of the semiconductor structure, and then its further cooling, associated with restrictions on the time of continuous operation of welding machines ("heating – cooling" mode). Those. specifications URRM [V min] [V min]: 200URRM [V max] [V max]: 400IFAV [A]: 7402Tc: 85UFM (Tc = 25 ° C) [V]: 1.05IFM (Tc = 25 ° C) [A]: 5000U (TO) / Tjmax [V]: 0.750rT / Tjmax [mOhm]: 0.029 Tjmax [° C]: 170Rthjc [° C / W]: 0.0090 Body: D.Q1 Version: tablet Type: welding

Thyristor TBCH343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH153-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH153-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH143-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH143-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH133-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI933-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI873-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI833-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI773-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI673-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI 643-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI643-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI643-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI573-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI543-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. VDRM / VRRM specifications [V min]: 100; VDRM / VRRM [V max]: 800; ITAV [A]: 2000; Tc: 93; VTM (Tc = 25 ° C) [V]: 1.50; ITM (Tc = 25 ° C) [A]: 6280; VT (TO) / Tjmax [V]: 0.840; rT / Tjmax [mΩ]: 0.090; tq [μs]: 160; Tjmax [° C]: 140; Rthjc [° C / W] 0.0180;

Thyristor TBI533-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI473-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI443-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI443-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI443-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI373-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI373-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI371-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI371-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI353-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI353-700

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI343-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI343-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI333-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI333-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI261-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI261-125

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI261-125

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI253-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI253-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI253-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI243-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI243-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI243-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI233-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI233-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI175-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI173-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI 153-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI153-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI143-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI 143-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI 143-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI133-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI123-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor T933-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T933-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T653-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T471-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T471-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T443-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T443-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T433-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-5000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-4000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-3600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T371-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T371-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T371-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T353-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T353-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T353-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T343-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T343-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T333-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T333-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T275-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T275-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T273-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T273-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T271-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T271-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T263-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T251-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T253-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T253-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T253-1390

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T253-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T253-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T253-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T243-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T243-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T243-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T243-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor 233-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor 233-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T193-5000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T193-4000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T193-3600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T193-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T193-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T183-4000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor T183-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T183-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T175-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T175-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T175-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T173-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T173-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T173-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T171-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T171-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T163-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T163-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T161-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T161-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T161-125

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T153-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T153-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T153-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T153-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T143-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T143-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T143-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T143-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T143-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T133-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T133-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T133-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T133-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T133-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converting devices: controlled and semi-controlled rectifiers at traction substations, AC regulators, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. Those. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T123-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converting devices: controlled and semi-controlled rectifiers at traction substations, AC regulators, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. Those. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T123-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converting devices: controlled and semi-controlled rectifiers at traction substations, AC regulators, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. Those. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T123-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converting devices: controlled and semi-controlled rectifiers at traction substations, AC regulators, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. Those. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T123-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converting devices: controlled and semi-controlled rectifiers at traction substations, AC regulators, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. Those. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Module MTh-800-18-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-740-24-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-650-12-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-630-28-D

circuits of direct and alternating currents of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-630-28-D

circuits of direct and alternating currents of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-595-18-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-540-36-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-500-36-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-430-24-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-400-44-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-400-28-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-320-36-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-320-36-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-320-18-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-260-44-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-250-44-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-250-24-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-240-65-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-200-28-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-200-18-F module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-160-36-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-160-22-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-130-28-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-1250-8-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТх-125-28-Ф1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-115-36-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MTh-1000-12-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТ3-595-18-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MT1-830-18-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MT1-765-24-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТ1-635-28-F module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MT1-560-36-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МТ1-500-36-Ф module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MT / Dx-800-18-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-740-24-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-650-12-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-630-28-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-540-18-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. specifications The modules are designed for energy converters and other DC and AC sysems of various power electrical installations. The required pressure of the semiconductor element is provided structurally, greatly simplifying mounting of the modules. It is possible to use several modules on a single heatsink, significantly reducing overall dimensions of the assembly.Main applications: – Rectifier bridges- AC regulators- DC motor controls- Power sources- Electric driveshttps: //en.proton-electrotex.com/ catalog / modules

Module MT / Dx-500-36-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-430-24-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dh-400-44-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-400-28-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-320-36-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-320-18-C1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-260-44-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-250-24-C1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. specifications The modules are designed for energy converters and other DC and AC sysems of various power electrical installations. The required pressure of the semiconductor element is provided structurally, greatly simplifying mounting of the modules. It is possible to use several modules on a single heatsink, significantly reducing overall dimensions of the assembly.Main applications: – Rectifier bridges- AC regulators- DC motor controls- Power sources- Electric driveshttps: //en.proton-electrotex.com/ catalog / modules

Module MT / Dx-250-24-C1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. specifications The modules are designed for energy converters and other DC and AC sysems of various power electrical installations. The required pressure of the semiconductor element is provided structurally, greatly simplifying mounting of the modules. It is possible to use several modules on a single heatsink, significantly reducing overall dimensions of the assembly.Main applications: – Rectifier bridges- AC regulators- DC motor controls- Power sources- Electric driveshttps: //en.proton-electrotex.com/ catalog / modules

Module MT / Dx-240-65-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dh-201-18-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-200-28-C1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-165-22-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-160-36-C1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-130-28-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-1250-8-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-115-36-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / Dx-1000-12-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MT / D3-595-18-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

MDx-800-44-D module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-660-18-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-630-18-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-515-36-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-500-36-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-470-44-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-400-52-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-400-18-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-320-65-А2 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-320-28-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

МДх-250-36-С1 module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDx-250-18-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDh-245-18-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

MDx-215-22-F module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDx-200-28-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDx-175-28-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDx-160-36-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDh-155-36-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MDx-1000-28-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MD1-950-44-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MD1-1280-22-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MD1-1250-28-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MD1-1125-28-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MD1-1000-44-E

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650;

Module MD / Th-800-18-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-740-24-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-650-12-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-630-28-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-540-18-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-500-36-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-430-24-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-400-44-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-400-28-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-400-28-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-320-36-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-320-18-S1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-260-44-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-250-24-S1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-240-65-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-240-65-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-201-18-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-200-28-S1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-165-22-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-160-36-S1

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-130-28-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-1250-8-D

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / Th-115-36-F

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

MD / Th-1000-12-D module

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

Module MD / T3-595-18-A2

The modules are intended for use in energy converters, as well as in other AC and DC circuits of various power electrical installations. The necessary clamping of the semiconductor element is provided structurally, which simplifies the installation of modules. It is possible to use several modules on one cooler, which significantly reduces the overall dimensions of the assembly. Main applications: Rectifier bridges AC regulators DC motor control Power supplies Electric drive. Https://www.proton-electrotex.com/catalog/modules Tech. UDRM / URRM [B] specifications: 1400-1800; IFAV / ITAV (Tc, ° C) [A]: 595 (85); UFM / UTM (Tc = 25 ° C) [B]: 1.50; IFM / ITM (Tc = 25 ° C) [A]: 1570; UT (TO) / Tjmax [B]: 0.84; rT / Tjmax [mΩ]: 0.310; tq [μs]: 320; Rthjc [° C / W]: 0.0650; Type: thyristor-diode

DCHL433-320 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 320Tc: 85UFM (Tc = 25 ° C) [V]: 2.70IFM (Tc = 25 ° C) [ A]: 1005trr / Tjmax [μs]: 2.5 Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: fast-recovery avalanche

DCHL433-250 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 250Tc: 85UFM (Tc = 25 ° C) [V]: 3.50IFM (Tc = 25 ° C) [ A]: 785trr / Tjmax [μs]: 2.0Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: quick-recovery avalanche

DCHL433-200 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 200Tc: 85UFM (Tc = 25 ° C) [V]: 3.90IFM (Tc = 25 ° C) [ A]: 628trr / Tjmax [μs]: 1.6Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: quick-recovery avalanche

DCHL333-320 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 320Tc: 85UFM (Tc = 25 ° C) [V]: 2.50IFM (Tc = 25 ° C) [ A]: 1005trr / Tjmax [μs]: 3.2 Tjmax [° С]: 125Rthjc [° С / W]: 0.05 Body: D.B2 Version: tablet type Type: quick-recovery avalanche

DCHL333-250 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 250Tc: 85UFM (Tc = 25 ° C) [V]: 3.00IFM (Tc = 25 ° C) [ A]: 785trr / Tjmax [μs]: 2.5 Tjmax [° С]: 125Rthjc [° С / W]: 0.05 Body: D.B2 Version: tablet type Type: quick-recovery avalanche

DCHL333-200 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 200Tc: 85UFM (Tc = 25 ° C) [V]: 3.50IFM (Tc = 25 ° C) [ A]: 628trr / Tjmax [μs]: 2.0Tjmax [° С]: 125Rthjc [° С / W]: 0.05 Body: D.B2 Version: tablet type Type: fast-recovery avalanche

DCHL253-800 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 800Tc: 85UFM (Tc = 25 ° C) [V]: 2.80IFM (Tc = 25 ° C) [ A]: 2512trr / Tjmax [μs]: 2.5 Tjmax [° С]: 125Rthjc [° С / W]: 0.02 Body: D.D2 Version: tablet type Type: quick-recovery avalanche

DCHL253-630 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 630Tc: 85UFM (Tc = 25 ° C) [V]: 3.20IFM (Tc = 25 ° C) [ A]: 1978trr / Tjmax [μs]: 2.0Tjmax [° С]: 125Rthjc [° С / W]: 0.02 Body: D.D2 Version: tablet type Type: quick-recovery avalanche

DCHL253-1000 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 1000Tc: 85UFM (Tc = 25 ° C) [V]: 2.30IFM (Tc = 25 ° C) [ A]: 3140trr / Tjmax [μs]: 3.2 Tjmax [° С]: 125Rthjc [° С / W]: 0.02 Body: D.D2 Version: tablet type Type: quick-recovery avalanche

DCHL233-320 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 320Tc: 90UFM (Tc = 25 ° C) [V]: 2.50IFM (Tc = 25 ° C) [ A]: 1005trr / Tjmax [μs]: 2.5 Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: fast-recovery avalanche

DCHL233-250 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 250Tc: 90UFM (Tc = 25 ° C) [V]: 3.00IFM (Tc = 25 ° C) [ A]: 785trr / Tjmax [μs]: 2.0Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: quick-recovery avalanche

DCHL233-200 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 200Tc: 90UFM (Tc = 25 ° C) [V]: 3.50IFM (Tc = 25 ° C) [ A]: 628trr / Tjmax [μs]: 1.6Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: quick-recovery avalanche

DCHL233-200 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1500IFAV [A]: 200Tc: 90UFM (Tc = 25 ° C) [V]: 3.50IFM (Tc = 25 ° C) [ A]: 628trr / Tjmax [μs]: 1.6Tjmax [° С]: 125Rthjc [° С / W]: 0.04 Body: D.B1 Version: tablet type Type: quick-recovery avalanche

DCHL153-800 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 800Tc: 85UFM (Tc = 25 ° C) [V]: 2.80IFM (Tc = 25 ° C) [ A]: 2512trr / Tjmax [μs]: 2.5 Tjmax [° С]: 125Rthjc [° С / W]: 0.02 Body: D.D2 Version: tablet type Type: quick-recovery avalanche

DCHL153-630 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 630Tc: 85UFM (Tc = 25 ° C) [V]: 3.20IFM (Tc = 25 ° C) [ A]: 1978trr / Tjmax [μs]: 2.0Tjmax [° С]: 125Rthjc [° С / W]: 0.02 Body: D.D2 Version: tablet type Type: quick-recovery avalanche

ДЧЛ153-1000

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 1000Tc: 85UFM (Tc = 25 ° C) [V]: 2.30IFM (Tc = 25 ° C) [ A]: 3140trr / Tjmax [μs]: 3.2 Tjmax [° С]: 125Rthjc [° С / W]: 0.02 Body: D.D2 Version: tablet type Type: quick-recovery avalanche

DCHL133-320 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 320Tc: 85UFM (Tc = 25 ° C) [V]: 2.50IFM (Tc = 25 ° C) [ A]: 1005trr / Tjmax [μs]: 3.2 Tjmax [° С]: 125Rthjc [° С / W]: 0.05 Body: D.B2 Version: tablet type Type: quick-recovery avalanche

DCHL133-250 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 250Tc: 85UFM (Tc = 25 ° C) [V]: 3.00IFM (Tc = 25 ° C) [ A]: 785trr / Tjmax [μs]: 2.5 Tjmax [° С]: 125Rthjc [° С / W]: 0.05 Body: D.B2 Version: tablet type Type: quick-recovery avalanche

DCHL133-200 diode

The diodes are intended for use in static power converters, as well as in other DC and AC circuits of various industrial or high-frequency installations, which require, first of all, short reverse recovery times and a high value of shock reverse dissipation power. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage value exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, and the voltage remains unchanged Tech. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2200IFAV [A]: 200Tc: 85UFM (Tc = 25 ° C) [V]: 3.50IFM (Tc = 25 ° C) [ A]: 628trr / Tjmax [μs]: 2.0Tjmax [° С]: 125Rthjc [° С / W]: 0.05 Body: D.B2 Version: tablet type Type: fast-recovery avalanche

Diode DCh453-800

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4400IFAV [A]: 800Tc: 85UFM (Tc = 25 ° C) [V]: 2.90IFM (Tc = 25 ° C) [A]: 2512U (TO) / Tjmax [V]: 1.40rT / Tjmax [mΩ]: 0.700trr / Tjmax [μs]: 5.3Tjmax [° C]: 125Rthjc [° C / W]: 0.0180 : D.D2 Version: tablet type: fast-healing

Diode DCh443-320

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4400IFAV [A]: 320Tc: 90UFM (Tc = 25 ° C) [V]: 3.60IFM (Tc = 25 ° C) [A]: 1000U (TO) / Tjmax [V]: 1.50rT / Tjmax [mΩ]: 2.000trr / Tjmax [μs]: 4.0Tjmax [° С]: 125Rthjc [° С / W]: 0.0350 : D.C3 Version: tablet type: fast-healing

Diode DČ373-2000

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 3000URRM [V max] [V max]: 3600IFAV [A]: 2000Tc: 84UFM (Tc = 25 ° C) [V]: 2.10IFM (Tc = 25 ° C) [A]: 6280U (TO) / Tjmax [V]: 1.40rT / Tjmax [mΩ]: 0.200trr / Tjmax [μs]: 16.0Tjmax [° C]: 125Rthjc [° C / W]: 0.0085 : D.F3 Version: tablet type: fast-healing

Diode DCh273-2000

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2400IFAV [A]: 2000Tc: 90UFM (Tc = 25 ° C) [V]: 1.85IFM (Tc = 25 ° C) [A]: 6280U (TO) / Tjmax [V]: 1.30rT / Tjmax [mΩ]: 0.150trr / Tjmax [μs]: 8.0 Tjmax [° С]: 125Rthjc [° С / W]: 0.0085 : D.F3 Version: tablet type: fast-healing

Diode DCh273-1600

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 1600Tc: 98UFM (Tc = 25 ° C) [V]: 2.10IFM (Tc = 25 ° C) [A]: 5024U (TO) / Tjmax [V]: 1.30rT / Tjmax [mΩ]: 0.170trr / Tjmax [μs]: 8.0 Tjmax [° C]: 125Rthjc [° C / W]: 0.0085 Case : D.F3 Version: tablet type: fast-healing

DCH271-500 diode

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1400IFAV [A]: 500Tc: 85UFM (Tc = 25 ° C) [V]: 1.85IFM (Tc = 25 ° C) [A]: 1570U (TO) / Tjmax [V]: 1.20rT / Tjmax [mΩ]: 0.530trr / Tjmax [μs]: 4.0Tjmax [° C]: 150Rthjc [° C / W]: 0.0700 : D.SB1Thread / Thread length / Width across: -24-1.5 / 19 / SW41 Version: pin Type: quick-recovery

DCH261-320 diode

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1400IFAV [A]: 320Tc: 90UFM (Tc = 25 ° C) [V]: 1.70IFM (Tc = 25 ° C) [ A]: 1005U (TO) / Tjmax [V]: 1.20rT / Tjmax [mΩ]: 0.850trr / Tjmax [μs]: 3.2Tjmax [° С]: 150Rthjc [° С / W]: 0.1000 Body: D.SA1Thread / Thread length / Width across: M20x1.5 / 15 / SW32 Version: pin type: quick-recovery

Diode DCh261-250

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 800URRM [V max] [V max]: 1600IFAV [A]: 250Tc: 101UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [ A]: 785U (TO) / Tjmax [V]: 1.25rT / Tjmax [mΩ]: 1.100trr / Tjmax [μs]: 2.5Tjmax [° С]: 150Rthjc [° С / W]: 0.1000 Body: D.SA1Thread / Thread length / Width across: -20×1.5 / 15 / SW32 Version: pin Type: quick-recovery

DCH253-1000 diode

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2400IFAV [A]: 1000Tc: 89UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 3140U (TO) / Tjmax [V]: 1.35rT / Tjmax [mΩ]: 0.250trr / Tjmax [μs]: 4.0Tjmax [° C]: 125Rthjc [° C / W]: 0.0180 Case : D.D2 Version: tablet type: fast-healing

Diode DCh243-800

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2400IFAV [A]: 800Tc: 74UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 2512U (TO) / Tjmax [V]: 1.30rT / Tjmax [mΩ]: 0.350trr / Tjmax [μs]: 5.0Tjmax [° С]: 125Rthjc [° С / W]: 0.0320 : D.C2 Version: tablet type: fast-healing

Diode DCh243-630

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 630Tc: 91UFM (Tc = 25 ° C) [V]: 2.30IFM (Tc = 25 ° C) [A]: 1978U (TO) / Tjmax [V]: 1.20rT / Tjmax [mΩ]: 0.300trr / Tjmax [μs]: 3.2Tjmax [° C]: 125Rthjc [° C / W]: 0.0320 : D.C2 Version: tablet type: fast-healing

Diode DCh243-1000

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1000Tc: 68UFM (Tc = 25 ° C) [V]: 1.80IFM (Tc = 25 ° C) [A]: 3140U (TO) / Tjmax [V]: 1.15rT / Tjmax [mΩ]: 0.250trr / Tjmax [μs]: 5.0Tjmax [° С]: 125Rthjc [° С / W]: 0.0320 : D.C2 Version: tablet type: fast-healing

DCH233-400 diode

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 400Tc: 94UFM (Tc = 25 ° C) [V]: 1.90IFM (Tc = 25 ° C) [A]: 1256U (TO) / Tjmax [V]: 1.20rT / Tjmax [mΩ]: 0.700trr / Tjmax [μs]: 3.2Tjmax [° C]: 125Rthjc [° C / W]: 0.0400 : D.B2 Version: tablet

Diode DCh233-200

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2400IFAV [A]: 200Tc: 107UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 628U (TO) / Tjmax [V]: 1.35rT / Tjmax [mΩ]: 1,700trr / Tjmax [μs]: 1.25Tjmax [° С]: 125Rthjc [° С / W]: 0.0400 : D.B2 Version: tablet type: fast-healing

Diode DCh223-320

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1600IFAV [A]: 320Tc: 102UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 1005U (TO) / Tjmax [V]: 1.25rT / Tjmax [mΩ]: 1.100trr / Tjmax [μs]: 2.5 Tjmax [° C]: 150Rthjc [° C / W]: 0.0700 Case : D.A1 Version: tablet type: fast-healing

DCH173-2000 diode

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 2000Tc: 93UFM (Tc = 25 ° C) [V]: 1.80IFM (Tc = 25 ° C) [A]: 6280U (TO) / Tjmax [V]: 1.20rT / Tjmax [mΩ]: 0.130trr / Tjmax [μs]: 6.3Tjmax [° C]: 125Rthjc [° C / W]: 0.0085 : D.F3 Version: tablet type: fast-healing

Diode DCh153-1000

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1200IFAV [A]: 1000Tc: 95UFM (Tc = 25 ° C) [V]: 1.90IFM (Tc = 25 ° C) [A]: 3140U (TO) / Tjmax [V]: 1.15rT / Tjmax [mΩ]: 0.200trr / Tjmax [μs]: 2.5Tjmax [° C]: 125Rthjc [° C / W]: 0.0180 : D.D2 Version: tablet type: fast-healing

DL333-500 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Fields of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 500Tc: 120UFM (Tc = 25 ° C) [V]: 1.50IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 0.440 Tjmax [° C]: 150Rthjc [° C / W]: 0.0400 Body: D.B2 Version: tablet type: avalanche

Diode DL273-3200

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 3000URRM [V max] [V max]: 3600IFAV [A]: 3200Tc: 103UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 10048U (TO) / Tjmax [B]: 1.05rT / Tjmax [mOhm]: 0.200Tjmax [° C]: 175Rthjc [° C / W]: 0.0085 Body: D.F3 Version: tablet type: avalanche

DL253-2000 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 2000Tc: 101UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [A]: 6280U (TO) / Tjmax [B]: 0.95rT / Tjmax [mOhm]: 0.220 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet Type: avalanche

DL253-1600 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 1600Tc: 112UFM (Tc = 25 ° C) [V]: 1.90IFM (Tc = 25 ° C) [ A]: 5024U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 0.300 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet type: avalanche

DL243-500 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 500Tc: 118UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [A]: 1570U (TO) / Tjmax [B]: 1.00rT / Tjmax [mOhm]: 0.800 Tjmax [° C]: 150Rthjc [° C / W]: 0.0300 Body: D.C2 Version: tablet type: avalanche

DL173-400 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 4000Tc: 107UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 12560U (TO) / Tjmax [B]: 1.00rT / Tjmax [mOhm]: 0.100 Tjmax [° C]: 175Rthjc [° C / W]: 0.0085 Housing: D.F3 Version: tablet Type: avalanche

DL173-3200 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 3200Tc: 115UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [A]: 10048U (TO) / Tjmax [B]: 1.00rT / Tjmax [mOhm]: 0.150 Tjmax [° C]: 175Rthjc [° C / W]: 0.0085 Body: D.F1 Version: tablet type: avalanche

DL161-200 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 400URRM [V max] [V max]: 1800IFAV [A]: 200Tc: 111UFM (Tc = 25 ° C) [V]: 1.40IFM (Tc = 25 ° C) [ A]: 628U (TO) / Tjmax [V]: 0.867rT / Tjmax [mΩ]: 0.840 Tjmax [° C]: 150Rthjc [° C / W]: 0.150 Body: D.SA1 Thread / Thread length / Turnkey size: M20x1.5 / 15 / SW32 Version: pin Type: avalanche

DL153-800 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 4600URRM [V max] [V max]: 6000IFAV [A]: 800Tc: 108UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [ A]: 2512U (TO) / Tjmax [V]: 0.90rT / Tjmax [mΩ]: 0.650 Tjmax [° C]: 140Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet type: avalanche

DL153-2000 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 1600URRM [V max] [V max]: 2000IFAV [A]: 2000Tc: 100UFM (Tc = 25 ° C) [V]: 1.80IFM (Tc = 25 ° C) [A]: 6280U (TO) / Tjmax [B]: 0.95rT / Tjmax [mOhm]: 0.190 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet Type: avalanche

DL153-1600 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2400URRM [V max] [V max]: 3200IFAV [A]: 1600Tc: 111UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [A]: 5024U (TO) / Tjmax [B]: 0.95rT / Tjmax [mOhm]: 0.320 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet Type: avalanche

DL153-1600 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2400URRM [V max] [V max]: 3200IFAV [A]: 1600Tc: 111UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [A]: 5024U (TO) / Tjmax [B]: 0.95rT / Tjmax [mOhm]: 0.320 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet Type: avalanche

DL153-1250 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 1250Tc: 121UFM (Tc = 25 ° C) [V]: 1.90IFM (Tc = 25 ° C) [ A]: 3925U (TO) / Tjmax [V]: 1.00rT / Tjmax [mΩ]: 0.450 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet type: avalanche

DL123-320 diode

Fast recovery (frequency) diodes are used in static power converters, as well as in other DC and AC circuits with a frequency of 2000 Hz and above, in various power plants, which require short reverse recovery times trr and small values of the recovery charge Qrr. A distinctive feature of this type of diodes is a high current load capacity at high frequencies. Applications: powerful DC drives in industry and transport, rectifiers for electrometallurgy, inverters, frequency converters for transport, uninterruptible power supplies. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1200IFAV [A]: 320Tc: 108UFM (Tc = 25 ° C) [V]: 1.70IFM (Tc = 25 ° C) [A]: 1005U (TO) / Tjmax [V]: 1.20rT / Tjmax [mΩ]: 0.850trr / Tjmax [μs]: 3.2Tjmax [° C]: 150Rthjc [° C / W]: 0.0700 Case : D.A1 Version: tablet type: fast-healing

DL123-320 diode

Avalanche diodes are intended for use in general-purpose devices with a frequency of up to 500 Hz. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The principle of operation of avalanche diodes is based on the effect of reversible breakdown of the pn junction when a reverse voltage is applied to it. As soon as the voltage exceeds the value specified in the manufacture of the avalanche diode, the current through it increases sharply, while the voltage remains unchanged. The main purpose of avalanche diodes is to protect power circuits from overvoltage. Areas of application: rectifiers for electrolysis and electroplating, direct current sources, in uncontrolled and semi-controlled rectifier bridges. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 320Tc: 110UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [A]: 1005U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 1.050 Tjmax [° C]: 150Rthjc [° C / W]: 0.0700 Housing: D.A1 Version: tablet Type: avalanche

Diode D453-1250

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 4600URRM [V max] [V max]: 6500IFAV [A]: 1250Tc: 101UFM (Tc = 25 ° C) [V]: 2.40IFM (Tc = 25 ° C) [ A]: 3925U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 0.400 Tjmax [° С]: 150Rthjc [° С / W]: 0.0180 Body: D.D2 Version: tablet type Type: rectifier

Diode D443-800

https://www.proton-electrotex.com/D443-80 Tech. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4400IFAV [A]: 800Tc: 94UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 2512U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 0.500 Tjmax [° C]: 150Rthjc [° C / W]: 0.0350 Body: D.C3 Version: tablet Type: rectifier

Diode D443-1000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2600IFAV [A]: 1000Tc: 117UFM (Tc = 25 ° C) [V]: 1.65IFM (Tc = 25 ° C) [ A]: 3140U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 0.280 Tjmax [° С]: 175Rthjc [° С / W]: 0.0350 Case: D.C3 Version: tablet type Type: rectifier

D353-800 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 4600URRM [V max] [V max]: 6000IFAV [A]: 800Tc: 100UFM (Tc = 25 ° C) [V]: 2.40IFM (Tc = 25 ° C) [ A]: 2512U (TO) / Tjmax [V]: 1.31rT / Tjmax [mOhm]: 0.740 Tjmax [° C]: 140Rthjc [° C / W]: 0.0180 Case: D.D2 Version: tablet type Type: rectifier

D353-1600 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3000URRM [V max] [V max]: 3600IFAV [A]: 1600Tc: 133UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 5024U (TO) / Tjmax [V]: 0.85rT / Tjmax [mΩ]: 0.150 Tjmax [° С]: 175Rthjc [° С / W]: 0.0180 Body: D.D2 Version: tablet type: rectifier

D353-1250 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3000URRM [V max] [V max]: 3400IFAV [A]: 1250Tc: 100UFM (Tc = 25 ° C) [V]: 2.20IFM (Tc = 25 ° C) [ A]: 3925U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 0.720 Tjmax [° C]: 175Rthjc [° C / W]: 0.0180 Case: D.D2 Version: tablet type Type: rectifier

Diode D343-1250

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1250Tc: 114UFM (Tc = 25 ° C) [V]: 1.65IFM (Tc = 25 ° C) [ A]: 3925U (TO) / Tjmax [V]: 0.95rT / Tjmax [mΩ]: 0.250 Tjmax [° С]: 190Rthjc [° С / W]: 0.0350 Case: D.C3 Version: tablet type Type: rectifier

D333-630 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 630Tc: 128UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 1978U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 0.350 Tjmax [° C]: 175Rthjc [° C / W]: 0.0450 Body: D.B3 Version: tablet type Type: rectifier

D333-500 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4400IFAV [A]: 500Tc: 101UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [V]: 1.05rT / Tjmax [mOhm]: 0.900 Tjmax [° C]: 150Rthjc [° C / W]: 0.0450 Body: D.B3 Version: tablet Type: rectifier

D273-2500 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 4600URRM [V max] [V max]: 5000IFAV [A]: 2500Tc: 112UFM (Tc = 25 ° C) [V]: 1.90IFM (Tc = 25 ° C) [ A]: 7850U (TO) / Tjmax [V]: 0.85rT / Tjmax [mΩ]: 0.150 Tjmax [° С]: 150Rthjc [° С / W]: 0.0085 Body: D.F3 Version: tablet type Type: rectifier

Diode D271-500

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. These are mainly diodes of direct polarity, in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 600URRM [V max] [V max]: 1200IFAV [A]: 500Tc: 136UFM (Tc = 25 ° C) [V]: 1.40IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [B]: 0.80rT / Tjmax [mOhm]: 0.500 Tjmax [° C]: 190Rthjc [° C / W]: 0.085 Body: D.SB2 Thread / Thread length / Turnkey size: -24-1.5 / 19 / SW45 Version: pin Type: rectifier

D271-400 diode

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 300URRM [V max] [V max]: 1800IFAV [A]: 400Tc: 144UFM (Tc = 25 ° C) [V]: 1.45IFM (Tc = 25 ° C) [ A]: 1256U (TO) / Tjmax [V]: 0.802rT / Tjmax [mOhm]: 0.534 Tjmax [° C]: 190Rthjc [° C / W]: 0.085 Body: D.SB2 Thread / Thread length / Wrench size: -24-1.5 / 19 / SW45 Version: pin Type: rectifier

D253-2000 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 2000Tc: 138UFM (Tc = 25 ° C) [V]: 1.55IFM (Tc = 25 ° C) [ A]: 6280U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 0.100Tjmax [° С]: 190Rthjc [° С / W]: 0.0180Case: D.D2 Version: tablet type: rectifier

D253-1600 diode

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2400IFAV [A]: 1600Tc: 147UFM (Tc = 25 ° C) [V]: 1.50IFM (Tc = 25 ° C) [ A]: 5024U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 0.120 Tjmax [° C]: 190Rthjc [° C / W]: 0.0180 Body: D.D2 Version: tablet Type: rectifier

Diode D243-800

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3200URRM [V max] [V max]: 4400IFAV [A]: 800Tc: 99UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 2512U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 0.500 Tjmax [° C]: 150Rthjc [° C / W]: 0.0320 Case: D.C2 Version: tablet type Type: rectifier

Diode D243-1000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2600IFAV [A]: 1000Tc: 122UFM (Tc = 25 ° C) [V]: 1.65IFM (Tc = 25 ° C) [ A]: 3140U (TO) / Tjmax [V]: 0.95rT / Tjmax [mΩ]: 0.280 Tjmax [° С]: 175Rthjc [° С / W]: 0.0320 Case: D.C2 Version: tablet type Type: rectifier

Diode D233-500

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4400IFAV [A]: 500Tc: 106UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [V]: 1.05rT / Tjmax [mΩ]: 0.900 Tjmax [° С]: 150Rthjc [° С / W]: 0.0400 Case: D.B2 Version: tablet type Type: rectifier

Diode D233-1000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1000Tc: 117UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 3140U (TO) / Tjmax [V]: 0.95rT / Tjmax [mΩ]: 0.350 Tjmax [° С]: 190Rthjc [° С / W]: 0.0400 Case: D.B2 Version: tablet type Type: rectifier

Diode D193-3200

https://www.proton-electrotex.com/D193-3200 Tech. specifications URRM [V min] [V min]: 6200URRM [V max] [V max]: 6500IFAV [A]: 3200Tc: 111UFM (Tc = 25 ° C) [V]: 1.85IFM (Tc = 25 ° C) [ A]: 6300U (TO) / Tjmax [V]: 0.90rT / Tjmax [mΩ]: 0.190 Tjmax [° С]: 150Rthjc [° С / W]: 0.0050 Case: D.G1 Version: tablet type Type: rectifier

D175-500 diode

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 600URRM [V max] [V max]: 1200IFAV [A]: 500Tc: 140UFM (Tc = 25 ° C) [V]: 1.40IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [B]: 0.80rT / Tjmax [mOhm]: 0.376 Tjmax [° C]: 190Rthjc [° C / W]: 0.085 Body: D.SB3 Thread / Thread length / Turnkey size: – 54 * Version: pin Type: rectifier

Diode D175-400

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 300URRM [V max] [V max]: 1800IFAV [A]: 400Tc: 144UFM (Tc = 25 ° C) [V]: 1.45IFM (Tc = 25 ° C) [ A]: 1256U (TO) / Tjmax [B]: 0.802rT / Tjmax [mOhm]: 0.534 Tjmax [° C]: 190Rthjc [° C / W]: 0.085 Body: D.SB3 Thread / Thread length / Wrench size: – 54 * Version: pin Type: rectifier

Diode D173-6300

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 6300Tc: 102UFM (Tc = 25 ° C) [V]: 1.40IFM (Tc = 25 ° C) [ A]: 12560U (TO) / Tjmax [V]: 0.70rT / Tjmax [mΩ]: 0.043 Tjmax [° С]: 175Rthjc [° С / W]: 0.0085 Body: D.F3 Version: tablet type Type: rectifier

Diode D173-5000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 2000IFAV [A]: 5000Tc: 109UFM (Tc = 25 ° C) [V]: 1.65IFM (Tc = 25 ° C) [ A]: 12560U (TO) / Tjmax [V]: 0.75rT / Tjmax [mOhm]: 0.650 Tjmax [° C]: 175Rthjc [° C / W]: 0.0085 Body: D.F3 Version: tablet type Type: rectifier

Diode D173-4000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 4000Tc: 124UFM (Tc = 25 ° C) [V]: 1.80IFM (Tc = 25 ° C) [ A]: 12560U (TO) / Tjmax [V]: 0.85rT / Tjmax [mΩ]: 0.065 Tjmax [° С]: 175Rthjc [° С / W]: 0.0085 Case: D.F3 Version: tablet type Type: rectifier

Diode D173-3200

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3000URRM [V max] [V max]: 3600IFAV [A]: 3200Tc: 109UFM (Tc = 25 ° C) [V]: 1.80IFM (Tc = 25 ° C) [ A]: 10048U (TO) / Tjmax [V]: 1.25rT / Tjmax [mΩ]: 0.080 Tjmax [° С]: 160Rthjc [° С / W]: 0.0085 Body: D.F3 Version: tablet type Type: rectifier

Diode D173-2500

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4400IFAV [A]: 2500Tc: 116UFM (Tc = 25 ° C) [V]: 1.80IFM (Tc = 25 ° C) [ A]: 7850U (TO) / Tjmax [V]: 0.80rT / Tjmax [mΩ]: 0.125 Tjmax [° С]: 150Rthjc [° С / W]: 0.0085 Case: D.F3 Version: tablet type Type: rectifier

Diode D171-500

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. These are mainly diodes of direct polarity, in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 600URRM [V max] [V max]: 1200IFAV [A]: 500Tc: 136UFM (Tc = 25 ° C) [V]: 1.40IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [B]: 0.809rT / Tjmax [mOhm]: 0.376 Tjmax [° C]: 190Rthjc [° C / W]: 0.085 Body: D.SB1 Thread / Thread length / Wrench size: М24х1,5 / 19 / SW41 Version: pin Type: rectifier

Diode 171-400

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 300URRM [V max] [V max]: 1800IFAV [A]: 400Tc: 150UFM (Tc = 25 ° C) [V]: 1.45IFM (Tc = 25 ° C) [ A]: 1256U (TO) / Tjmax [V]: 0.802rT / Tjmax [mOhm]: 0.534 Tjmax [° C]: 190Rthjc [° C / W]: 0.075 Body: D.SB1 Thread / Thread length / Wrench size: -24-1.5 / 19 / SW41 Version: pin Type: rectifier

D161-400 diode

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 300URRM [V max] [V max]: 1600IFAV [A]: 400Tc: 120UFM (Tc = 25 ° C) [V]: 1.45IFM (Tc = 25 ° C) [ A]: 1256U (TO) / Tjmax [V]: 0.836rT / Tjmax [mOhm]: 0.516 Tjmax [° C]: 190Rthjc [° C / W]: 0.130 Body: D.SA1 Thread / Thread length / Wrench size: M20x1,5 / 15 / SW32 Version: pin Type: rectifier

Diode D161-320

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 300URRM [V max] [V max]: 1600IFAV [A]: 320Tc: 128UFM (Tc = 25 ° C) [V]: 1.35IFM (Tc = 25 ° C) [ A]: 1005U (TO) / Tjmax [V]: 0.856rT / Tjmax [mΩ]: 0.530 Tjmax [° C]: 190Rthjc [° C / W]: 0.150 Body: D.SA1 Thread / Thread length / Turnkey size: M20x1,5 / 15 / SW32 Version: pin Type: rectifier

Diode D161-250

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 300URRM [V max] [V max]: 1800IFAV [A]: 250Tc: 144UFM (Tc = 25 ° C) [V]: 1.35IFM (Tc = 25 ° C) [ A]: 785U (TO) / Tjmax [V]: 0.785rT / Tjmax [mOhm]: 0.701 Tjmax [° C]: 190Rthjc [° C / W]: 0.150 Body: D.SA1 Thread / Thread length / Wrench size: M20x1.5 / 15 / SW32 Version: pin Type: rectifier

D161-200 diode

This type of diodes is intended for use in electrical and electronic devices in DC and AC circuits with industrial and increased frequency up to 500 Hz. Basically, these are diodes of direct polarity in which the anode is a copper base, and the cathode is a flexible lead. Less common are diodes with reverse polarity, in the marking of which there is a sign (X), the anode of such a diode is a flexible lead, and the cathode is a copper base. The polarity sign of the diode is indicated on its body. One of the main advantages of pin diodes, in addition to the tightness of the case, is the possibility of operation without creating an external regulated clamping force, it is provided directly by the design of the diode case. Flanged diodes are mainly used on rotating structures. Those. specifications URRM [V min] [V min]: 100URRM [V max] [V max]: 1800IFAV [A]: 200Tc: 125UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 628U (TO) / Tjmax [V]: 0.825rT / Tjmax [mOhm]: 0.769 Tjmax [° C]: 190Rthjc [° C / W]: 0.150 Body: D.SA1 Thread / Thread length / Turnkey size: M20x1.5 / 15 / SW32 Version: pin Type: rectifier

Diode D143-800

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1800URRM [V max] [V max]: 2800IFAV [A]: 800Tc: 136UFM (Tc = 25 ° C) [V]: 1.55IFM (Tc = 25 ° C) [ A]: 2512U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 0.410 Tjmax [° C]: 175Rthjc [° C / W]: 0.0270 Body: D.C2 Version: tablet type: rectifier

Diode D143-630

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2400URRM [V max] [V max]: 4000IFAV [A]: 630Tc: 112UFM (Tc = 25 ° C) [V]: 2.10IFM (Tc = 25 ° C) [ A]: 1978U (TO) / Tjmax [V]: 1.10rT / Tjmax [mΩ]: 0.730 Tjmax [° C]: 150Rthjc [° C / W]: 0.0270 Body: D.C2 Version: tablet type Type: rectifier

Diode D143-1250

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1250Tc: 121UFM (Tc = 25 ° C) [V]: 1.65IFM (Tc = 25 ° C) [ A]: 3925U (TO) / Tjmax [V]: 0.95rT / Tjmax [mΩ]: 0.250 Tjmax [° С]: 190Rthjc [° С / W]: 0.0320 Case: D.C2 Version: tablet type Type: rectifier

Diode 143-1000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1000Tc: 148UFM (Tc = 25 ° C) [V]: 1.55IFM (Tc = 25 ° C) [ A]: 3140U (TO) / Tjmax [V]: 1.00rT / Tjmax [mΩ]: 0.227 Tjmax [° С]: 190Rthjc [° С / W]: 0.0270 Body: D.C2 Version: tablet type Type: rectifier

Diode 133-800

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 2000IFAV [A]: 800Tc: 145UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 2512U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 0.280 Tjmax [° C]: 190Rthjc [° C / W]: 0.0360 Body: D.B2 Version: tablet Type: rectifier

Diode 133-500

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 500Tc: 140UFM (Tc = 25 ° C) [V]: 1.70IFM (Tc = 25 ° C) [ A]: 1570U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 0.690 Tjmax [° C]: 175Rthjc [° C / W]: 0.0360 Body: D.B2 Version: tablet Type: rectifier

Diode 133-400

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 3800URRM [V max] [V max]: 4000IFAV [A]: 400Tc: 117UFM (Tc = 25 ° C) [V]: 1.85IFM (Tc = 25 ° C) [ A]: 1256U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 1.210 Tjmax [° C]: 150Rthjc [° C / W]: 0.0360 Body: D.B2 Version: tablet Type: rectifier

Diode 133-1000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1000Tc: 117UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 3140U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 0.350 Tjmax [° C]: 190Rthjc [° C / W]: 0.0400 Case: D.B1 Version: tablet type Type: rectifier

Diode 133-1000

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 1000URRM [V max] [V max]: 1800IFAV [A]: 1000Tc: 117UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 3140U (TO) / Tjmax [V]: 0.95rT / Tjmax [mOhm]: 0.350 Tjmax [° C]: 190Rthjc [° C / W]: 0.0400 Case: D.B1 Version: tablet type Type: rectifier

Diode 123-500

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 320Tc: 135UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 1005U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 1.000 Tjmax [° C]: 175Rthjc [° C / W]: 0.0700 Case: D.A1 Version: tablet type Type: rectifier

Diode D123-320

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 320Tc: 135UFM (Tc = 25 ° C) [V]: 2.00IFM (Tc = 25 ° C) [ A]: 1005U (TO) / Tjmax [V]: 1.00rT / Tjmax [mOhm]: 1.000 Tjmax [° C]: 175Rthjc [° C / W]: 0.0700 Case: D.A1 Version: tablet type Type: rectifier

Diode 123-250

Rectifying diodes are one of the most widespread types of power switches. They are designed for use in AC/DC systems up to 500 Hz in general purpose electric devices. Anode and cathode are flat bases. Polarity of the diode is marked by a polarity symbol on its housing. The devices have a sealed housing insulating the semiconductor element from environment.Applications: rectifying bridges, traction converters, electric drives, invertors. Тех. спецификации URRM [В min] [В min]: 4600URRM [В max] [В max]: 6000IFAV [A]: 200Tc: 116UFM (Tc=25°С) [В]: 2.50IFM (Tc=25°С) [A]: 628U(TO)/Tjmax [В]: 1.10rT/Tjmax [мОм]: 2.600Tjmax [°С]: 150Rthjc [°С/Вт]: 0.0700Корпус: D.A1Исполнение: таблеточноеТип: выпрямительный

Diode D123-200

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 4600URRM [V max] [V max]: 6000IFAV [A]: 200Tc: 116UFM (Tc = 25 ° C) [V]: 2.50IFM (Tc = 25 ° C) [ A]: 628U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 2.600 Tjmax [° C]: 150Rthjc [° C / W]: 0.0700 Body: D.A1 Version: tablet type Type: rectifier

Diode D066-12500

Welding diodes (boxed and unpackaged) are mainly used in resistance welding machines where high currents are required. A feature of the operation of diodes in welding machines is short-term cycles of passing current pulses, leading to the heating of the semiconductor structure, and then its further cooling, associated with restrictions on the time of continuous operation of welding machines ("heating – cooling" mode). Those. specifications URRM [V min] [V min]: 200URRM [V max] [V max]: 400IFAV [A]: 14703Tc: 85UFM (Tc = 25 ° C) [V]: 1.04IFM (Tc = 25 ° C) [A]: 6300U (TO) / Tjmax [V]: 0.72rT / Tjmax [mOhm]: 0.026 Tjmax [° C]: 180Rthjc [° C / W]: 0.0039 Version: tablet Type: welding

Diode D063-11250

Welding diodes (boxed and unpackaged) are mainly used in resistance welding machines where high currents are required. A feature of the operation of diodes in welding machines is short-term cycles of passing current pulses, leading to the heating of the semiconductor structure, and then its further cooling, associated with restrictions on the time of continuous operation of welding machines ("heating – cooling" mode). Those. specifications URRM [V min] [V min]: 200URRM [V max] [V max]: 400IFAV [A]: 14703Tc: 85UFM (Tc = 25 ° C) [V]: 1.04IFM (Tc = 25 ° C) [A]: 6300U (TO) / Tjmax [V]: 0.72rT / Tjmax [mOhm]: 0.026 Tjmax [° C]: 180Rthjc [° C / W]: 0.0039 Version: tablet Type: welding

Astra-551

Basic data: – 2 channels of detection: volumetric optoelectronic (IR), radio wave (RF); – immunity to thermal interference; – effective detection of longitudinal displacements; – high detectivity and noise immunity; – microprocessor-based signal analysis; – discrete adjustment of the detecting ability ; – "alarm memory" mode; – two-color indication; – self-testing during operation; – complete with a universal swivel bracket. IR: – volumetric detection zone; – spherical lens; – temperature compensation; – test mode for passage. PB: – detection zone , combined with the detection zone of the IR channel; – shift of the radiation frequency, allowing the use of two detectors in the same room; – smooth adjustment of the range; – resistance to the radiation of fluorescent lamps. Those. specifications Technical data: – operating frequencies from 5350 to 5650 MHz – operating range 10 m – detection zone angle in the horizontal plane 90 ° – recommended installation height 2.2 ÷ 2.5 m – supply voltage 8 ÷ 15 V – current consumption, no more than 16 mA – channel resistance relay in standby mode 6 ÷ 8 Ohm – overall dimensions 107х72х52 mm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at 35 ° С – degree of protection by shell IP41 Informative value: "detector output to operating mode"; " norm ";" alarm ";" alarm in the "alarm memory" mode; "alarm in the test mode"; "malfunction"; "interference".

Astra-551

Basic data: – 2 channels of detection: volumetric optoelectronic (IR), radio wave (RF); – immunity to thermal interference; – effective detection of longitudinal displacements; – high detectivity and noise immunity; – microprocessor-based signal analysis; – discrete adjustment of the detecting ability ; – "alarm memory" mode; – two-color indication; – self-testing during operation; – complete with a universal swivel bracket. IR: – volumetric detection zone; – spherical lens; – temperature compensation; – test mode for passage. PB: – detection zone , combined with the detection zone of the IR channel; – shift of the radiation frequency, allowing the use of two detectors in the same room; – smooth adjustment of the range; – resistance to the radiation of fluorescent lamps. Those. specifications Technical data: – operating frequencies from 5350 to 5650 MHz – operating range 10 m – detection zone angle in the horizontal plane 90 ° – recommended installation height 2.2 ÷ 2.5 m – supply voltage 8 ÷ 15 V – current consumption, no more than 16 mA – channel resistance relay in standby mode 6 ÷ 8 Ohm – overall dimensions 107х72х52 mm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at 35 ° С – degree of protection by shell IP41 Informative value: "detector output to operating mode"; " norm ";" alarm ";" alarm in the "alarm memory" mode; "alarm in the test mode"; "malfunction"; "interference".

Astra-531 AK

Basic data: – detection of destruction of ordinary glasses protected by a polymer film, – reinforced, patterned, multilayer building, tempered flat; – miniature case; – microprocessor-based signal analysis; – discrete sensitivity adjustment; – additional protection with a metal shield against electromagnetic interference; – mode "alarm memory"; – case opening control; – supply voltage control; – optoelectronic relay; – installation on the wall, on the ceiling, between the frames of Tech. specifications Technical data: – operating range 6 m – supply voltage 8 ÷ 15 V – recommended installation height 2 m – resistance of the relay channel in standby mode, no more than 8 Ohm – current consumption, no more than 18 mA Operating conditions: – temperature from -20 to + 50 ° С – relative air humidity without condensation moisture up to 95% at + 35 ° С – degree of protection by enclosure IP30 Informative value: "normal"; "alarm"; "tampering"; "supply voltage is lower than permissible"; "increased level of interference at high frequency"; "increased level of interference by low frequency ".

Astra-641

Basic data: – 2 channels of detection: volumetric optical-electronic (IR), ultrasonic (US); – immunity to thermal interference; – effective detection of longitudinal displacements; – high detecting ability and noise immunity; – microprocessor-based signal analysis; – "alarm memory "; – two-color indication; – self-testing during operation; – complete set with a universal swivel bracket IR: – volumetric detection zone; – spherical lens; – discrete adjustment of detectivity; – temperature compensation; – test mode per pass. US: – discrete adjustment of detectivity ; – smooth adjustment of range; – quartz stabilization of the operating frequency, which allows the use of several detectors in one room. Those. specifications Technical data: – operating range 10 m – angle of the detection zone in the horizontal plane 90 ° – operating frequency of the ultrasonic channel 25 kHz – recommended installation height 2.2 m – supply voltage 8 ÷ 15 V – current consumption, no more than 25 mA – resistance of the relay channel in standby mode 6 ÷ 8 Ohm – overall dimensions 106.5х72х51.5 mm Operating conditions: – temperature from -10 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at 35 ° С – degree of protection by the shell IP41 Information content: "detector output to operating mode"; " norm ";" alarm ";" alarm in the "alarm memory" mode; "alarm in the test mode"; "malfunction"; "interference".

Astra-5 isp. AM

Basic data: – volumetric detection zone; – spherical lens; – anti-masking function; – detection of changes in spatial orientation; – detection of detachment from the mounting wall; – anti-tampering zone; – microprocessor-based signal analysis; – discrete adjustment of detectivity; – test mode for passage; – case opening control; – supply voltage control; – self-testing during operation; – optoelectronic relays; – complete with a universal swivel bracket. Those. specifications Technical data: – operating range 10 m – angle of the detection zone in the horizontal plane 90 ° – recommended installation height 2.3 ÷ 2.5 m – supply voltage 8 ÷ 15 V – current consumption, no more than 16 mA – resistance of the relay channel in standby mode 6 ÷ 16 Ohm – permissible current through the Relay contacts, no more than 0.08 A – permissible voltage at the Relay contacts, no more than 100 V – permissible current through the TMP circuit, no more than 0.05 A – permissible voltage through the TMP circuit, no more than 72 V – overall dimensions 106.5x72x51, 5 mm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by shell IP41 Information content: "detector output to operating mode"; "normal"; "alarm"; "alarm when masking ";" alarm when changing position ";" alarm when detached from the mounting wall ";" alarm in test mode ";" malfunction ";" opening ".

Astra-516

Basic data: – volumetric detection zone; – spherical lens; – anti-tampering zone; – microprocessor-based signal analysis; – discrete adjustment of detectivity; – test mode for passage; – "alarm memory" mode; – self-testing during operation; – temperature compensation; – complete set with a universal swivel bracket. Those. specifications Technical data: – operating range 12 m – angle of the detection zone in the horizontal plane 90 ° – recommended installation height 2.2 ÷ 2.5 m – supply voltage 8 ÷ 15 V – consumption current, no more than 12 mA – resistance of the relay channel in standby mode 6 ÷ 8 Ohm – overall dimensions 106.5х72х51.5 mm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by the shell IP41 "alarm"; "alarm in the" alarm memory "mode;" alarm in the test mode ";" malfunction ".

Astra-5

Basic data: volumetric detection zone (lens – "standard"); anti-tampering zone; microprocessor-based signal analysis; discrete adjustment of detectivity; presence of a test mode for passage; mode "alarm memory"; temperature compensation; wide range of operating temperatures; optoelectronic relay; stability to external illumination not less than 6500 lux; the possibility of installation using a bracket (swivel or ball). Those. specifications Technical data: detector range 12 m angle of the detection zone in the horizontal plane 90 ° recommended installation height 2.5 m supply voltage 8 ÷ 15 V Current consumption, no more than 12 mA resistance of the relay channel in standby mode 6 ÷ 8 Ohm Operating conditions: – temperature from -30 to + 50 ° С – relative air humidity without condensation moisture up to 95% at + 35 ° С – degree of protection by the shell IP41 Information content: "detector output to standby mode"; "normal"; "alarm"; "alarm in" alarm memory "mode;" alarm in test mode ";" opening ";" malfunction ".

Astra-9

Basic data: – volumetric detection zone (lens – "standard"); – selection of the detection zone by the position of the printed circuit board; – anti-tampering zone; – microprocessor analysis of the signal; – discrete adjustment of the detecting ability; – test mode for passage; – mode "alarm memory" ; – temperature compensation; – resistance to external illumination not less than 6500 lux; – optoelectronic relay; – wide range of operating temperatures; – complete with an angle bracket. Those. specifications Technical data: – detector operating range 10 m – detection zone angle in the horizontal plane 90 ° – recommended installation height 2.5 m – supply voltage 8 ÷ 15 V – consumption current, no more than 15 mA – resistance of the relay channel in standby mode, no more than 8 Ohm – temperature from -30 to + 50 ° С – relative humidity without moisture condensation up to 95% at + 35 ° С – degree of protection by shell IP41 Information content: "detector output to standby mode"; "normal"; "alarm"; "alarm in memory mode alarms ";" alarm in test mode ".

Astra-621

Basic data: – 2 channels of detection: volumetric optoelectronic (IR), surface sound (AC); – microprocessor-based signal analysis; – two optoelectronic relays; – additional protection with a metal shield against electromagnetic interference; – "alarm memory" mode; – mode testing of the AK-channel; – control of the supply voltage; IR: – discrete adjustment of the detecting ability; – anti-tampering zone; – resistance to external illumination of at least 6500 lx AC: – detection of destruction of ordinary glasses protected by a polymer film, – reinforced, patterned, multilayer building, hardened flat; – discrete sensitivity adjustment Tech. specifications Technical data: – IR channel range 12 m – AK channel range 6 m – IR channel detection area angle in the horizontal plane 90 ° – recommended installation height 2.4 ÷ 2.5 m – supply voltage 8 ÷ 15 V – current consumption, no more than 15 mA – resistance of the relay channel in standby mode, no more than 8 Ohm Operating conditions: – temperature from -20 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by the shell IP30 Informative value: "exit to standby mode" ; "norm – IR"; "alarm – IR"; "norm – AK"; "alarm – AK"; "supply voltage below the permissible"; "increased level of interference at high frequency"; "increased level of interference at low frequency".

Astra-517

Basic data: volumetric detection zone (lens – "standard"); selection of the detection zone by the position of the printed circuit board (8 or 12 m); anti-tamper zone; microprocessor-based signal analysis; discrete adjustment of detecting ability; test mode for passage; mode "alarm memory"; temperature compensation ; case opening control; resistance to external illumination not less than 6500 lux; optoelectronic relay; wide range of operating temperatures; complete with ball bracket. Those. specifications Technical data: – detector range 12 m – detection zone angle in the horizontal plane 90 ° – recommended installation height 2.2 ÷ 2.4 m-supply voltage 8 ÷ 15 V-current consumption, no more than 12 mA-resistance of the relay channel in standby mode, not more than 8 Ohm – overall dimensions 70 × 51 × 41 mm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 98% at + 25 ° С – degree of protection by enclosure IP41 Informative value: "detector output to standby mode"; ";" alarm ";" alarm in "alarm memory" mode; "alarm in test mode"; "opening".

Astra-512

Basic data: – no reaction to the movement of animals weighing up to 20 kg; – volumetric detection zone (lens – "standard"); – no anti-tampering zone; – microprocessor-based signal analysis; – four-site pyroelectric detector; – discrete adjustment of the detecting ability; – test mode per pass; – "alarm memory" mode; – case opening control; – temperature compensation; – resistance to external illumination at least 6500 lux; – optoelectronic relay; – complete with an angle bracket. Those. specifications Technical data: – operating range 10 m – minimum range of the detector 2 m – angle of the detection zone in the horizontal plane 90 ° – recommended installation height 2.4 ÷ 2.5 m – supply voltage 8 ÷ 15 V – current consumption, no more than 15 mA Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without condensation moisture up to 95% at + 35 ° С – degree of protection by shell IP41 Information content: "detector output to standby mode"; "normal"; "alarm"; "alarm in" alarm memory "mode ; "opening"; "test mode alarm".

Astra-515 isp. BUT

1 Purpose 1.1 The detector is designed to detect intrusion into the protected space of an enclosed space and generate an alarm notification by opening the output contacts of the signal relay. 1.2 The detector is powered from any DC source with a nominal voltage of 12 V with a ripple amplitude of no more than 0.1 V. zones. Each sensitive area consists of two elementary sensitive areas. The sensitive zones of the detector are formed by a Fresnel lens and a two-area pyroelectric radiation detector. The electrical signal from the pyroelectric receiver is fed to the microcontroller, which, in accordance with the specified operation algorithm, generates the "Alarm" notification by opening the output circuit of the optoelectronic relay. Those. Specifications Technical data Detector operating range 10 m angle of the detection zone in the horizontal plane 90 ° Recommended installation height 2.3 ÷ 2.5 m Supply voltage 8 ÷ 15 V Current consumption, no more than 15 mA Relay channel resistance in standby mode, no more than 8 Ohm Operating conditions: – temperature from 0 to + 50 ° С – relative humidity of air without condensation moisture up to 95% at + 35 ° С – degree of protection by shell IP41 Informative value "exit to standby mode"; "norm"; "alarm".

Astra-RI-M RR

– autonomous operation: receiving and decoding notifications from registered detectors of the Astra-RI-M system, issuing notifications to the built-in relay outputs and an open collector output, issuing to the two-wire RS-485 interface for connected expansion units (displays and relays); – wireless zone expander as part of a system with the central Control Panel Astra Pro series (Astra-712 Pro, Astra-812 Pro, Astra-8945 Pro); – signal repeater (RTR) as part of the Astra-RI-M system to increase the range of the system. Those. specifications Technical data: Operating frequencies: – letter 1433, 42 MHz – letter 3434, 42 MHz – Radio channel range in open areas, not less: – for detectors 300 m – for KTS1000 m – for RPDK1000 m – for RTR1500 m – for RPD Astra-RI2000 mm power MPP in transmission mode, no more than 10 mW Supply voltage 10 to 28 W Consumption current at 12 V, no more than 100 mA Consumption current at 24 V, no more than 80 mA Technical readiness time, no more than 60 s RS-485 interface line length, subject to the use of KSV cable -0.52 / KSPVG 0.2-0.5 / UTP-5 up to 1000 mg overall dimensions 136x86x38 mm Operating conditions: – temperature from -10 to + 55 ° С – relative humidity of air without moisture condensation up to 98% at + 40 ° С – degree of protection IP20 enclosure Informativeness 3 three-color indicators: POWER indicator – power state, VIOLATION indicator – expander's own state, including the state of devices registered in it, RADIO NETWORK indicator – transmission / reception of information for the sake of mains; "A 485 V" – input / output of the interface of wired communication RS-485; 4 universal programmable outputs: "Relay 1" – "Relay 3" – provide load switching no more than 0.1 A / 100 V, "OC" – "Open collector", provides switching of the load no more than 0.5 A / 27 V

Astra-642

Basic data: – volumetric detection zone, control of the entire volume of the room; – immunity to thermal interference; – effective detection of longitudinal displacements; – quartz stabilization of the operating frequency, allowing the use of several detectors in one room; – microprocessor-based signal analysis; – discrete adjustment of the detecting ability; – smooth adjustment of range; – "alarm memory" mode; – two-color indication; – self-testing during operation – complete with a universal swivel bracket. Those. specifications Technical data: – operating range 10 m – recommended installation height 2.2 m – supply voltage 8 ÷ 15 V – consumption current, no more than 25 mA – resistance of the relay channel in standby mode 6 ÷ 8 Ohm – overall dimensions 106.5х72х38 mm Operating conditions: – temperature from -10 up to + 50 ° С – relative humidity without moisture condensation up to 95% at + 35 ° С – degree of protection by the shell IP41 Information content: "exit to standby mode"; "normal"; "alarm"; "alarm in the" alarm memory "mode; ";" hindrance ".

Astra-552

Basic data: – solid volumetric detection zone; – immunity to thermal interference; – effective detection of longitudinal displacements; – resistance to the radiation of fluorescent lamps; – microprocessor-based signal analysis; – smooth adjustment of the detecting ability; – self-testing during operation; – complete set with a universal swivel bracket Tech. specifications Technical data: – detector operating range 10 m – detection zone angle in the horizontal plane 90 ° – operating frequencies from 5350 to 5650 MHz – recommended installation height, not less than 2.1-2.5 m – supply voltage 9 ÷ 15 V – current consumption, not more than 16 mA – resistance of the relay channel in standby mode, no more than 16 Ohm – overall dimensions 106x72x38 mm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° C Information content: "exit to standby mode" ; "normal"; "alarm"; "interference"; "malfunction" "opening".

Astra-7 isp. BUT

Basic data: – installation on the ceiling, volumetric circular detection zone; – maximum installation height up to 3.6 m; – 110 elementary sensitive zones; – microprocessor-based signal analysis; – discrete adjustment of detecting ability; – temperature compensation; – wide operating temperature range; – resistance to external illumination not less than 6500 lx; – "alarm memory" mode; – case opening control; – optoelectronic relay. Those. specifications Technical data: – diameter of the detection zone 9 m – recommended installation height 2.4 ÷ 3.6 m – angle of the detection zone in the horizontal plane 360 ° – supply voltage 8 ÷ 15 V – consumption current, no more than 15 mA – resistance of the relay channel in standby mode, not more than 8 Ohm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by shell IP41 in the "alarm memory" mode; "alarm in test mode"; "opening".

Astra-7 isp. BUT

Basic data: – installation on the ceiling, volumetric circular detection zone; – maximum installation height up to 3.6 m; – 110 elementary sensitive zones; – microprocessor-based signal analysis; – discrete adjustment of detecting ability; – temperature compensation; – wide operating temperature range; – resistance to external illumination not less than 6500 lx; – "alarm memory" mode; – case opening control; – optoelectronic relay. Those. specifications Technical data: – diameter of the detection zone 9 m – recommended installation height 2.4 ÷ 3.6 m – angle of the detection zone in the horizontal plane 360 ° – supply voltage 8 ÷ 15 V – consumption current, no more than 15 mA – resistance of the relay channel in standby mode, not more than 8 Ohm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by shell IP41 in the "alarm memory" mode; "alarm in test mode"; "opening".

Astra-R RPU

Features: power relay with three contacts (group of switchable contacts); memory for 99 RPD; 2 modes of relay operation: – opening (closing) contacts for a period of 2 s to 30 minutes, – opening (closing) contacts until the next command; built-in ( printed) antenna. Those. specifications Technical data: – operating frequency range 433.92 MHz ± 0.1% – supply voltage 10 ÷ 15 V – consumption current, not more than 60 mA – technical readiness time, not more than 10 s – maximum voltage switched by relay contacts at a load current of 1 A , not more than 250 V Operating conditions: – temperature from 0 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by a shell IP30

Astra-8

Basic data: – 2 detection channels: volumetric optoelectronic (IR), surface sound (AK); – installation on the ceiling; – two optoelectronic relays; – microprocessor-based signal analysis; – "alarm memory" mode; – AK-channel testing mode ; – case opening control; – supply voltage control; IR: – volumetric circular detection zone; – 110 elementary sensitive zones; – resistance to external illumination at least 6500 lux; – discrete adjustment of the detecting ability. polymer film, – reinforced, patterned, multi-layer construction, hardened flat; – discrete sensitivity adjustment. Those. specifications Technical data: – diameter of the IR channel detection zone 9 m – detection range in the volume angle sector 120 ° from the center of the AK channel microphone 6 m – IR channel detection zone angle in the horizontal plane 360 ° – recommended installation height 2.4 ÷ 3.6 m – supply voltage 8 ÷ 15 V – consumed current, not more than 21 mA – resistance of the relay channel in standby mode, not more than 8 Ohm Operating conditions: – temperature from -20 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – the degree of protection by the shell IP30 Informative value: "exit to the operating mode"; "norm – IR"; "alarm – IR"; "norm – AK"; "alarm – AK"; "supply voltage below the permissible"; "opening"; "increased level high frequency interference ";" increased level of low frequency interference ".

Astra-531 CM

Basic data: – 2 detection channels: surface optoelectronic (IR), surface sound (AC); – miniature case; – microprocessor signal analysis; – optoelectronic relay; – "alarm memory" mode; – test mode of the AK channel; – case opening control; – supply voltage control; – complete with a ball bracket. IR: – surface detection zone (lens – "curtain"); – resistance to external illumination not less than 6500 lux; – temperature compensation; – discrete adjustment of the detecting ability. – detection of destruction of ordinary glass, protected by a polymer film, reinforced, patterned, multilayer building, tempered flat; – discrete sensitivity adjustment. Those. specifications Technical data: – range of the AK channel 6 m – range of the IR channel 5 m – recommended installation height up to 5 m – supply voltage 8 ÷ 15 V – current consumption, no more than 18 mA – resistance of the relay channel in standby mode, no more than 8 Ohm Operating conditions : – temperature from -20 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection by the shell IP30 alarm for the IR channel ";" alarm for the AK channel ";" alarm for the IR and AK channels simultaneously ";" tampering ";" increased level of interference at high frequency ";" increased level of interference at low frequency ";" supply voltage is lower than permissible ".

Astra-531 IK

Basic data: – surface detection zone (lens – "curtain"); – no anti-tampering zone; – miniature body; – microprocessor-based signal analysis; – temperature compensation; – additional protection by a metal shield against electromagnetic interference; – "alarm memory" mode; – case opening control; – supply voltage control; – resistance to external illumination at least 6500 lux; – optoelectronic relay; – complete with ball bracket Technical specifications Technical data: – operating range 5 m – angle of the detection zone in the vertical plane 95 ° – angle of the detection zone in the horizontal plane 30 ° – recommended installation height up to 5 m – supply voltage 8 ÷ 15 V – consumption current, no more than 18 mA – resistance of the relay channel in standby mode 6 ÷ 8 Ohm Operating conditions: – temperature from -20 to + 50 ° С – relative humidity of air without condensation moisture up to 95% at + 35 ° С – degree of protection by the shell IP41 Informative value: "exit to standby mode"; "normal"; "alarm"; "alarm in memory mode" alarms ";" tampering ";" supply voltage below permissible ".

Astra-624

Features: – detection of destruction of: – concrete walls and ceilings with a thickness of at least 0.12 m, – brick walls with a thickness of at least 0.15 m, – wooden structures with a material thickness of 20 to 40 mm, – plywood with a thickness of at least 4 mm, – structures made of chipboards with a thickness of at least 15 mm; – registration of destructive effects produced by the following types of tools (according to GOST R 50862-2005): manual cutting, thermal cutting, electric cutting, electric shock, electric rotary with shock, electric shock; – smooth adjustment of sensitivity to vibration; – three test modes; – microprocessor-based signal analysis; – case opening control; – control of the detector's detachment from the surface; – metal bar and magnets for fastening included in the Tech. specifications Technical data: Operating frequencies: – first 3.15 ± 0.10 kHz – second 6.3 ± 0.1 kHz – sensitivity at operating frequencies 126 ± 2 dB Maximum operating range: – for concrete, brick, wooden surfaces 2.0 ± 0.1 m – for a metal cabinet, glass sheet 1.6 ± 0.1 m – for a metal armored safe 1.0 ± 0.1 m Maximum protected area: – when installed on a concrete, brick, wooden surface 13.8 m2 – when installed on the surface of a metal cabinet , glass sheet 9.0 m2 – when installed on the surface of a metal armored safe 3.1 m2 – supply voltage from 9 to 15 V – current consumption, no more than 25 mA – technical readiness time, no more than 10 s – overall dimensions 109х34х27 mm Parameters of signal relays: – permissible current 80 mA – permissible voltage 100 V – resistance of the relay output circuit in standby state, no more than 16 Ohm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С – degree of protection IP30 Informative value: "normal"; "alarm"; "shock detection"; "continuous impact detection"; "tampering"; "tear-off"; "supply voltage below normal"

Astra-931

Features: – storage in memory and indication (by sequential enumeration) of up to 99 numbers – radio transmitting devices RPD Astra-R (RPD); – indication of the discharge of RPD batteries; – accompaniment of indication with a sound signal; – forced reset of the received information; – when switching off power supply information is not saved. Those. specifications Technical data: – number of digits, no more than 2 – sign height, no more than 14 mm – supply voltage 10 ÷ 15 V – consumption current, no more than 130 mA – technical readiness time, no more than 5 s – overall dimensions 80x50x25 mm Operating conditions: – temperature from -30 to +50 ° С – relative air humidity up to 95% at + 35 ° С without moisture condensation

Astra-R kit

Organization of personal protection, security of objects and remote control by wireless transmission of notifications when pressing a button of small-sized radio transmitting devices and control of the relay of a radio receiving device when identifying a notification source. -R isp B (RPU) with a power relay with three contacts (a group of switchable contacts) and a memory for 25 RPDs Features: dynamic coding of messages using "keeloq" technology; 2 relay operation modes: – opening (closing) contacts for a period of 2 from up to 30 minutes, – opening (closing) of contacts until the next command. Those. specifications Technical data: – operating frequency range 433.92 MHz ± 0.1% – power of radio transmitting devices 10 mW – supply voltage RPU 10 ÷ 15 V – RPU consumption current, not more than 60 mA – RPU technical readiness time, not more than 10 s – RPD operating range in an open area (covered with dry soil) in the absence of powerful radio interference, at least 150 m – maximum relay voltage at a load current of 1 A, not more than 250 V Operating conditions: – temperature from 0 to + 50 ° С – relative humidity without moisture condensation up to 95% at + 35 ° С – degree of protection by enclosure IP30

Astra-351 isp. NS

Basic data: – detection of an inclination angle of 5-9 ° along three axes; – automatic recovery at a constant position for more than 8 seconds; – discrete adjustment of sensitivity to vibration; – microprocessor-based signal analysis; – two optoelectronic relays; – a miniature case of Tech. specifications Technical data: – supply voltage from 8 to 15 V – current consumption 12 mA – time of technical readiness 8 s – overall dimensions 70х33х16 mm Parameters of signal relays: – allowable current 80 mA – allowable voltage 100 V – resistance of the relay output circuit in standby state from 6 to 8 Ohm Operating conditions: – temperature from -30 to + 50 ° С – relative humidity of air without condensation moisture up to 95% at + 35 ° С – degree of protection by shell IP41 Information content: "normal"; "alarm-Strike"; "alarm-slope"

Astra-612

Basic data: – detection of destruction of ordinary glass protected by a polymer film – reinforced, patterned, multilayer building, tempered flat glass; – miniature case; – microprocessor-based signal analysis; – discrete sensitivity adjustment; – "alarm memory" mode; – optoelectronic relay; – installation on the wall, on the ceiling, between frames. Those. specifications Technical data: – operating range 6 m – supply voltage 8 ÷ 15 V – recommended installation height 2 m – resistance of the relay channel in standby mode 6 ÷ 8 Ohm – current consumption, no more than 18 mA Operating conditions: – temperature from -10 to + 50 ° С – relative humidity air without condensation moisture up to 95% at + 35 ° С – degree of protection by the shell IP30 Information content: "normal"; "alarm"; "increased level of interference at high frequency"; "increased level of interference at low frequency".

Astra-R RPD bracelet

Features: dynamic coding of messages using "keeloq" technology; confirmation of the fact of pressing the button by indication for 5 minutes; built-in battery type CR2430; battery discharge indication Tech. specifications Technical data: – operating frequency range 433.92 MHz ± 0.1% – output power 10 mW – supply voltage from a built-in battery type CR2430, no more than 3 V – operating range in an open area (covered with dry ground) in the absence of powerful radio interference, not less than 50 m Operating conditions: – temperature from 0 to + 50 ° С – relative humidity of air without moisture condensation up to 95% at + 35 ° С

Astra-361

Features: power supply and alarm notification via two-wire alarm loop. Those. specifications Technical data: – supply voltage 3 ÷ 30 V – current consumption in standby mode at supply voltage 15 V, not more than 0.003 mA – current consumption in standby mode at supply voltage 30 V, not more than 0.01 mA – current consumption in mode alarm, not less than 5 mA – cable length 3 m Operating conditions: – temperature from 0 to + 50 ° С

Light mast mini

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel.

Emergency lighting installation

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – AC mains voltage 220 V, frequency 50 Hz. Detailed characteristics – in the passport of the power plant 2) Light source HPS lamp with a power of 150 watts. Luminous flux 15000 Lm3) Dimensions in packed state – 440x350x300 mm4) Installation height in working condition – Up to 2 meters5) Total weight – 12 kg6) Inflation time – Up to 60 sec7) Climatic version – U8) Degree of protection IP 65/449) Protection class from electric shock – I or P10) Light distribution – Class P in accordance with GOST 17677

Mini LED light mast

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – AC mains voltage 220 V, frequency 50 Hz or from the built-in petrol power station with a power of 0.65-0.9 kW. (For detailed characteristics, see the passport of the power plant) 2) Light source, a light-emitting diode with a power of 100 W. Luminous flux 10,000 Lm3) Lamp life – 18,000 hours4) Pump capacity up to 250 W5) Dimensions in packed state – 440x350x300 mm6) Installation height in working condition – 2 meters7) Gas generator HHY 960A8) Electric power 550W9) Tank capacity – 4 liters (6 hours of operation) 10) Total weight – 20 kg 11) Inflation time – 60 sec 12) Climatic modification – U13) Degree of protection – IP 65/4414) Class of protection against electric shock – I or P15) Light distribution – class P according to GOST 17677

Light tower Mini with generator

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – AC mains with voltage of 220 V, frequency 50 Hz or from built-in gasoline power plant with a power of 0.65-0.9 kW. (For detailed characteristics, see the passport of the power plant) 2) Light source DNaT with a power of 150 W. 3) Luminous flux 15,000 lm 4) Lamp life 18,000 hours 5) Pump capacity up to 250 W 6) Dimensions in packed condition – 400х350х400 mm 7) Installation height in working condition – 2 meters 8) Electric power 550W 9) Tank capacity – 4 l (6 hours of operation) 10) Total weight – 20 kg11) Inflation time 60 sec 12) Climatic version – U13) Degree of protection – IP 65/4414) Class of protection against electric shock – I or P15) Light distribution – class P according to GOST 17677

Tower Emergency lighting system (AOU) Light Tower with generator

Emergency lighting installation "Light tower" ("Light pillar", pillar of the Ministry of Emergency Situations, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at mass events, as well as during night works in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI 400W. 3) Luminous flux – 48,000 – 120,000 lm. It is possible to install two or more lamps. 4) Compressor – with a capacity of 150 to 1200 W, with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600 × 460 × 500 mm … (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5-7 m. 7) Total weight – 65 kg. (The weight may vary depending on the configuration). 8) The time of inflation of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15-20 minutes. sec10) Climatic modification – U11) Category of placement – according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 17677 Resource of fan brushes – 500 hours, Fan, fabric cylinder and air filter – 1000 hours. Illuminated area up to 15000 m2.

Tower Emergency lighting installation (AOU) Light Tower

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 600 W. 3) Luminous flux 48,000 – 120,000 lm. Installation of two or more lamps is possible. 4) Compressor with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 6) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 7) Height of the installation in working condition – 5 m. 8) Total weight – 65 kg. Weight may vary depending on the configuration. 9) Inflation time of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15 – 20 minutes 10) Wind resistance (with stretch marks) – up to 20 m / s11) Climatic version – U12) Category of placement according to GOST 1515013) Degree of protection – IP 65/4414) Class of protection against electric shock – II15) Light distribution – class P according to GOST 1767716) Illuminated area up to 20,000 m2.

Tower Emergency Lighting System (AOU)

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 1000 W. 3) Luminous flux 48,000 – 120,000 lm. It is possible to install two or more lamps. 4) Compressor – with a capacity of 150 to 1200 W, with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) Inflation time of the fabric cylinder 1 minute, the time of full lighting of the lamp – 5 min. U11) Location category according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 17677

Emergency lighting installation (AOU)

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 600 W. 3) Luminous flux 48,000 – 120,000 lm. It is possible to install two or more lamps. 4) Compressor with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 7 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) Inflation time of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 min. version – U11) Category of placement according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution class P according to GOST 17677.

Tower Emergency lighting installation (AOU) Light Tower

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 400 W. 3) Luminous flux – 48,000 – 120,000 lm. Installation of two or more lamps is possible. 4) Compressor – with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters per minute, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 7 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) The time of inflation of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 min. version – U11) Category of placement according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 1767715) Resource of fan brushes – 500 hours, fan, fabric cylinder and air filter – 1000 hours. 16) Illuminated area up to 15000 m2.

Light Tower

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI 600 W – 2 pieces 3) Luminous flux – 48,000 – 120,000 lm. Installation of two or more lamps is possible. 4) Compressor – with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters per minute, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) Inflation time of the fabric cylinder – 1 minute, the time of full lighting of the lamp – 5 min. version – U10) Category of placement according to GOST 1515011) Degree of protection – IP 65/4412) Class of protection against electric shock – II13) Light distribution – class P according to GOST 17677

Tower Emergency lighting system Light Tower

Emergency lighting installation Light Tower or as they are called "Light pole" is designed for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant; 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI with a capacity of 600 W.; 3) Luminous flux – 48,000 – 120,000 lm. Installation of two or more lamps is possible.; 4) Compressor – with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters per minute, with an overpressure of 10,000 – 14,000 Pa.; 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m; 7) Total weight – 65 kg. Weight may vary depending on the configuration; 8) The time of inflation of the fabric cylinder is 1 minute, the time of full ignition of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15 – 20 minutes; 9) Wind resistance (with stretch marks) – up to 20 m / s ; Climatic modification – U; 10) Category of placement – according to GOST 15150; 11) Degree of protection – IP 65/44; 12) Class of protection against electric shock – II; 13) Light distribution – class P according to GOST 17677.

Tower Emergency lighting installation (AOU) Light Tower

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 400 W. 3) Luminous flux – 48,000 – 120,000 lm. (Installation of two or more lamps is possible). 4) Compressor – with a capacity of 150 to 1200 W, with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m. 7) Total weight – 65 kg. (The weight may vary depending on the configuration). 8) The time of inflation of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15-20 minutes. sec10) Climatic modification – U11) Category of placement – according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class R according to GOST 1767715) Illuminated area – up to 15000 m2.

LED emergency lighting system "Light Tower"
LED Light Tower
Light Tower Mini Battery Powered

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – AC mains voltage 220 V, frequency 50 Hz. Detailed characteristics – in the passport of the power plant 2) Light source LED-Lamp with a power of 50 watts. 3) Luminous flux 15000 Lm 4) Dimensions in packed state – 400x350x400 mm 5) Installation height in working condition – Up to 2 meters 6) Total weight – 12 kg 7) Inflation time up to 60 sec 8) Climatic version – U9) Degree of protection IP 65/4410) Class protection against electric shock – I or P11) Light distribution – Class P according to GOST 17677

Light Tower Mini

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – AC mains voltage 220 V, frequency 50 Hz. Detailed characteristics – in the passport of the power plant 2) Light source – 50 W LED-Lamp. 3) Luminous flux 15000 lm 4) Dimensions in packed state – 400x350x400 mm 5) Installation height in working condition – Up to 2 meters 6) Total weight – 12 kg 7) Inflation time up to 60 sec 8) Climatic version – U9) Degree of protection – IP 65/4410) Electric shock protection class – I or P11) Light distribution – Class P in accordance with GOST 1767712) Illuminated area – 1600 m2

LED emergency lighting system "Light Tower"

Emergency lighting installation Light Tower or as they are called "Light pole" is designed for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant; 2) Light source – LED 300 W. 3) Lighting area – 15 thousand sq. m4) Compressor – with a capacity of 150 to 1200 W, with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm6) Installation height in working condition – 5 m 7 ) Total weight – 65 kg. Weight may vary depending on the configuration. 8) The time of inflation of the fabric cylinder is 1 minute, the time of full ignition of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15 – 20 minutes 9) Wind resistance (with stretch marks) – up to 20 m / s10) Climatic modification – U11) Category of placement – according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 17677 Emergency lighting system LED light tower without 2.2 kW generator. Height 3-5 meters. The arm of the installation is inflated and maintained unfolded by a built-in compressor. Power 300 W. Luminous flux 30,000 lumens. Illuminated area 7850 m2. It is distinguished by the white glow of the Light Tower.

Pneumatic lighting mast

The pneumatic lighting mast MPO type is intended for use in the field, with a temperature operating mode of -50 ° C + 50 ° C, with installation on the roof of vehicles, trailers, mobile generating stations, for solving problems of rapid deployment of communication antennas or mobile lighting of emergency rescue areas, construction and installation works, in hard-to-reach places of such conduct. Those. specifications Weight: 45 kg Working height 2 m Mast composition: 3 sections, air cylinders Working voltage of lamps: 220V Lamp power: 1000W × 2 Type of lighting devices: floodlight / headlight detector Working pressure in the mast: 1.5-2 kg / cm2 Control system: remote control with cable, without cable; Angles of rotation: horizontal ≤365 °, vertical ≤365 ° Dimensions: 1140 * 854 * 230

Mobile lighting complex with a generator
Tower Emergency Lighting System (AOU)

Emergency lighting installation Light Tower or as they are called "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as carrying out night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 600 W. 3) Luminous flux 48,000 – 120,000 lm. It is possible to install two or more lamps. 4) Compressor with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) Inflation time of the fabric cylinder 1 minute, the time of full lighting of the lamp – 5 min. U11) Location category according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 17677

Air handling unit with battery heat exchanger GOLD CX

Air handling unit with battery heat exchanger GOLD CX Complete air handling unit with direct-drive fans, filters for supply and exhaust air, and battery heat exchanger Air consumption up to 50 400 m³ / h Waste heat recovery unit assembled and filled at the factory (for sizes 35-80) Highly efficient protection Two new GOLD sizes (7 and 11) and optimized fan sizes make the choice of units more flexible – it is now easier to choose the optimal unit size for a specific project Revolutionary control system in the GOLD CX module: The most striking innovation is the revolutionary control system, IQlogic. In addition to new and user-friendly functions, there is the possibility of communication and control by means of a BMS as well as a laptop, tablet PC or mobile phone. To expand the functionality, additional IQlogic + modules can be connected. The GOLD CXGOLD concept is designed for comfortable ventilation and is used, depending on the type chosen, in public buildings, schools, kindergartens, offices, shops, banks, residential buildings, etc. Focus on new generation units E focuses on energy efficiency and installation flexibility, which is achieved by a large number of sizes and different air flow rates. GOLD is a serial complete unit for comfort ventilation, produced in several sizes. The unit has patented EC fans that meet the most stringent energy efficiency requirements, as well as an integrated IQnomic automation system with many energy-saving functions, including communication. The GOLD unit has a range of accessories such as dampers, air heaters, coolers, recirculation sections and chillers. The accessories are available for outdoor installation.

Antenna posts for stationary and mobile objects

Antenna posts for placement on stationary and mobile objects, according to the technical requirements of the consumer: Antenna posts are completed with antenna systems, radio control systems and other elements of the microwave path, manufactured by SCARD-Electronics JSC; Operating frequency range from 9 kHz to 40 GHz; At the request of the consumer, posts are completed with positioning devices and rotary support devices Example of an antenna post for a mobile measuring complex Composition of an antenna post 9 kHz – 40 GHz: 1. Antenna set: P6-119 with blanking function (magnetic field measurements in the range of 9 kHz-30 MHz) P6-120 with blanking function (measurement of the electric field in the range of 9 kHz-30 MHz) AC7.22 (providing the search mode in the range of 300 MHz-2 GHz) P6-121 (measurements in the range of 30 MHz-300 MHz) P6-122 ( measurements in the range of 300 MHz-3 GHz) AC7.23 (providing a search mode in the range of 1 GHz-18 GHz) AC7.24 (providing a search mode in the range of 18 GHz-40 GHz) P6-125 (measurements in the range of 2 GHz-18 GHz ) P6-129 (measured in the range 18 GHz-40 GHz) 2. A set of frequency transponders: SK4RT 1-18 / 2-4SK4RT 1-18-40 / 2-4 3. Organizer of devices complete with coordinate and devices. 4. A set of auxiliary equipment (power supply organizer, organizer cable). 5.Stretchless telescopic mast (purchased product) .Technical characteristics: Operating frequency range – 9 kHz – 40 GHz; Output frequency range of terminal devices – 9 kHz – 2 GHz, 2 GHz – 4 GHz; elevation plane – from -10 ° to 90 ° Angle of movement in the plane of polarization (for antennas P6-121 and P6-122) – from -90 ° to 90 ° Lift height of the telescopic mast (excluding the height of the vehicle) – 10 m Maximum vertical load per telescopic mast – 140 kg Maximum wind load in working position without the use of guy ropes – 11 m / s Tech. Specifications Frequency range: 9 kHz – 60 GHz

RZA4-0.9 - reflector antenna system with a collapsible reflector 0.9 m

The RZA4-0.9 antenna system is a Cassegrain antenna system with a collapsible reflector and a replaceable set of irradiating systems for typical sections of the range from 10 to 90 GHz. Recommended for receiving signals from satellite and radio relay communication lines, as well as experimental research. Thanks to the collapsible design of the reflector, it allows the installation of the antenna system in hard-to-reach places and greatly facilitates its transportation. , double linear, circular right and left rotation, depending on the type of installed irradiator. Fast change of frequency range and type of polarization is ensured by installing replaceable irradiation systems. When replacing the irradiation system, additional settings of the counter-reflector of the antenna system are not required. The antenna system made it possible to achieve an instrumentation value no worse than that of all-metal precision mirror antenna systems. The following types of irradiation systems can be used: irradiating systems OS-1 / L with linear polarization of 15 sections for the frequency range from 9.97 to 90 GHz; irradiating systems OS-1 / DL with double linear polarization of 12 sections for the frequency range from 9.97 to 60 GHz; irradiating systems OS-1 / K with circular polarization of right and left rotation of 12 sections for the frequency range from 9.97 to 60 GHz. supplies in various configurations according to customer-defined ratings of irradiating systems. At the customer's request, it is completed with various types of azimuth-elevation rotary devices for various operating conditions. Replaceable irradiation systems for RZA4-0.9 Polarization: vertical and horizontal Directional pattern width at 0.1-55 level ° VSWR (no more) – 1.3. # Designation Frequency range Isolation dB, more than 1 OS-1 / L-1 9.97-12.4 27 2 OS-1 / L-2 12.4-15.9 27 3 OS-1 / L-3 15.9-18.0 27 4 OS-1 / L-4 18.0-20.5 27 5 OS-1 / L-5 20.0-24.5 27 6 OS- 1 / L-6 24.0-26.5 27 7 OS-1 / L-7 26.5-33.0 27 8 OS-1 / L-8 33.0-38.5 27 9 OS-1 / L-9 38.5-40.0 27 10 OS-1 / L-10 40.0-43.0 27 11 OS-1 / L-11 43.0-50.0 27 12 OS-1 / L- 12 50.0-60.0 27No. value Frequency range Isolation dB, more than 1 OS-1 / K-1 9.97-12.4 27 2 OS-1 / K-2 12.4-15.9 27 3 OS-1 / K-3 15.9-18 , 0 27 4 OS-1 / K-4 18.0-20.5 27 5 OS-1 / K-5 20.0-24.5 27 6 OS-1 / K-6 24.0-26.5 27 7 OS-1 / K-7 26.5-33.0 27 8 OS-1 / K-8 33.0-38.5 27 9 OS-1 / K-9 38.5-40.0 27 10 OS-1 / K10 40.0-43.0 27 11 OS-1 / K-11 43.0-50.0 27 12 OS-1 / K-12 50.0-60.0 27 Tech. specifications The RZA4-0.9 antenna system is a Cassegrain antenna system with a collapsible reflector and a replaceable set of irradiation systems for typical sections of the range from 10 to 90 GHz.

P6-321 - broadband biconical antenna

The broadband collapsible measuring biconical antenna P6-321 is designed to receive and transmit * a linearly polarized signal in the range from 1 to 100 MHz. Depending on the type of the connected terminal device, it can be used to measure the strength of the electromagnetic field or the energy flux density and radiation of the electromagnetic field. It is recommended for metrological applications and problems of EMC and PEM evaluation. Features of P6-321: It has the properties of an electric dipole. Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field with a high voltage accuracy. Protection of terminal equipment from static electricity is provided by the antenna design (using earthing device) .It has a collapsible design for transportation when folded. It can be used in laboratory and field conditions, as well as on mobility equipment. Supplied with a calibration certificate. m. * The range of work for transmission is agreed with the customer. Technical characteristics of the antenna P6-321: Frequency range 1-100 MHz Linear polarization VSWR, no more than 3.0 Dimensions 1585 * 1235 * 1425 mm Weight 0.7 kg Tech. Specifications Frequency Range 1-100 MHz

P6-223 - broadband measuring horn antenna

The P6-223 broadband measuring horn antenna based on the H-shaped waveguide is designed to receive and transmit a linearly polarized signal in the range from 0.8 to 18 GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, radiation of an electromagnetic field, determination of signal polarization and direction to the radiation source. Recommended for metrological applications and problems of EMC and PEM evaluation. Features of P6-223: Stable metrological characteristics allow measurements of weak signals with high accuracy. At the request of the customer, it is supplied with a microwave output connector of N or SMA type. Protection of terminal equipment from static electricity is provided by the antenna design (with the use of a grounding device). Possible operation in laboratory and field conditions, as well as on means of mobility. Supplied with a calibration certificate. Technical characteristics of the antenna P6-223: Frequency range, GHz from 0.8 to 18 Antenna gain in the frequency range, dB, from 6 to 17KSVN typical 1.5 Polarization linear Error limits Ku ± 2 dB Microwave connector type SMA / N Dimensions 310 * 330 * 312 mm Weight 2.3 kg Operating temperature range -40 +50 С Tech. specifications Frequency range, GHz 0.8 to 18

P6-222M - active-passive broadband measuring antenna system

P6-222 is a search antenna in the range of 1 – 18 GHz, providing operation in both active and passive amplification modes with the connection of a laser pointer. The passive logarithmic antenna is placed in a protective radio-transparent case and is made in the form of a longitudinal array of vibrators powered by a two-wire symmetrical line with square conductors, which simultaneously serve as a supporting structure. Features of P6-222: Has a wide frequency range; Manual mode for detecting signal sources; Stationary mode for measurement; Can be used in EMC and PEMIN evaluation systems; Has a small weight and dimensions; Supplied with a calibration certificate Technical characteristics of the P6-222M antenna: Frequency range 1 – 18 GHz Gain in passive mode dB, ≥4.0 Gain in active mode dB , ≥24.0 KSVN typical 2.5 Polarization linear Error limits Ku ± 2 dB Microwave connector type SMA Dimensions 423 × 198 × 199 mm Weight 1.8 kg Operating temperature range -40 +65 С Tech. Specifications Frequency Range 1 – 18 GHz

P6-221 - broadband measuring biconical antenna

Receiving measuring biconical active antenna P6-221 is designed to measure the electric field strength in the frequency range from 30 to 1,500 MHz. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Features of P6-221: It has high dynamic characteristics of the active part. It can be used in laboratory and field conditions, as well as on means of mobility. It has a blanking function for the active part. It is recommended for use in newly developed EMF measurement systems in accordance with GOST 513.4.3. (IEC 61000-4.3). Supplied with a calibration certificate. Technical characteristics of the antenna P6-221: Frequency range 30-1500 MHz Calibration coefficient 10-50 dB (1 / m) Error limits Kc ± 1.5 dB Supply voltage + 5 V Current consumption 150 mA Microwave connector type SMA Dimensions 389 * 144 mm Weight 0.65 kg Operating temperature range -40 + 65 S Tech. specifications Receiving measuring biconical active antenna P6-221 is intended for measurements of electric field strength in the frequency range from 30 to 1500 MHz.

P6-220 - electric field measuring antenna

Receiving measuring active antenna P6-220 is designed to measure the electric field strength in the frequency range from 9 kHz to 30 MHz. Recommended for metrological applications and problems of EMC and PEM evaluation. Features of P6-220: It has high dynamic characteristics. It can be used in laboratory and field conditions, as well as on means of mobility. It has the function of blanking the active part. It is recommended for use in newly developed EMI measurement systems. in accordance with GOST R 513.4.3 (IEC 61000-4.3) Supplied with a calibration certificate Technical characteristics of the antenna P6-220: Frequency range from 9 kHz to 30 MHz Calibration coefficient from -14 to 6.8 dB (1 / m) Field sensitivity 25 μA / m Error limits Kc ± 1.5 dB Supply voltage ± 15 V Current consumption ± 100 mA Microwave connector type SMA Dimensions 459 * 200 mm Weight 1.1 kg Operating temperature range -40 + 65 C Tech. specifications Receiving measuring active antenna P6-220 is intended for measurements of electric field strength in the frequency range from 9 kHz to 30 MHz.

P6-219 - magnetic field measuring antenna

The receiving measuring active antenna together with measuring receiving devices is designed to measure the energy flux density of the electromagnetic field, the parameters of antenna devices, to measure the strength of sinusoidal, noise and pulsed magnetic fields of radio interference in laboratory rooms, shielded chambers and in open areas to solve problems of electromagnetic compatibility of radio electronic equipment in frequency range from 9 kHz to 30 MHz. Recommended for metrological applications and PEMIN assessment tasks. The antenna can be used for laboratory and field work. Complies with GOST 22261-94, GOST R 51319. Features of P6-219: It has high dynamic characteristics. The antenna frame diameter is 100 mm. Operation in laboratory and field conditions, as well as on mobility equipment is possible. The design provides for the possibility of mounting the antenna on any type of support with connection size ¼ unc 20. Supplied with a calibration certificate Technical characteristics of the P6-119 antenna: Frequency range 20 to 600 MHz Calibration coefficient -6 to 6 dB (1 / m) Field sensitivity 25 μA / m Error limits Kc ± 1.5 dB Supply voltage ± 12 V Current consumption ± 100 mA Microwave connector type SMA Dimensions 181.5 × 68.6 × 87.5 mm Weight 0.4 kg Operating temperature range -40 + 65 C Tech. Specifications Frequency range 20 to 600 MHz

P6-135 - measuring horn antenna

Measuring horn antenna P6-135 is designed for receiving and transmitting a linearly polarized signal in the range from 75.0 to 110.0 GHz. Structurally built according to the "optimal" horn scheme and has a waveguide output of rectangular cross-section 2.54×1.27 mm. (WR10 / RG-359 / U standard). It has two basic configuration options P6-135-1 and P6-135-3 in accordance with the typical terminal devices used by the consumer. Recommended for metrological applications and experimental research. Features of P6-135: Has a good non-uniformity of the gain and VSWR. Suitable for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Stable metrological characteristics allow using P6-135 as a transmitting antenna, in the configuration options P6-135-1 and P6-135-2. Can be used in EMC and PEMIN evaluation systems. Supplied with a calibration certificate Technical characteristics of the antenna P6-135: Technical characteristics of the antenna P6-135: Frequency range, GHz 75 – 110 Antenna gain in the frequency range, not less than ≥ 19.8 Expanded uncertainty in measuring the effective area and gain (coverage factor = 2) , dB ± 0.9 KSVN typical 1.5 Polarization linear Microwave connector type waveguide Overall dimensions (including the fastening ring), mm⌀88 × 75 Weight 0.10 kg Operating temperature range -40 +50 C Option P6-135-1: Recommended for use with terminal devices with waveguide input in accordance with the standard GOST13317-89 or devices with a waveguide th input of the WR10 / RG-359 / U standard. The set includes a horn antenna P6-135 in the range of 75.0-110.0 GHz, a waveguide transition from a cross-section of 2.54×1.27 mm to a cross-section of 2.4×1.2 mm, a device for attaching to a tripod, as well as the necessary set of auxiliary options .Completion option P6-135-2: Recommended for use with terminal devices with V-type coaxial input and providing measurements in the frequency range 75.0-110.0 GHz. The set includes a P6-135 horn antenna of the 75.0-110.0 GHz range, a coaxial-waveguide transition from a cross-section of 2.54×1.27 mm to a coaxial 1 mm, a measuring cable, a device for attaching to a tripod, and the necessary set of auxiliary options … Those. specifications The measuring horn antenna P6-135 is designed for receiving and transmitting linearly polarized signals in the range from 75.0 to 110.0 GHz.

P6-134 - measuring horn antenna

Measuring horn antenna P6-134 is designed for receiving and transmitting a linearly polarized signal in the range from 50.0 to 75.0 GHz. Structurally built according to the "optimal" horn scheme and has a waveguide output of rectangular section 3.76 x 1.88 mm. (WR15 / RG-98 / U standard). It has three basic configuration options P6-134-1, P6-134-2, P6-134-3 in accordance with the typical terminal devices used by the consumer. Features of P6-134: Recommended for metrological applications and experimental research. It has good non-uniformity of the gain and VSWR. Suitable for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Stable metrological characteristics allow using P6-134 as a transmitting antenna, in the configurations P6-134-1 and P6-134-2. Can be used in EMC and PEMIN evaluation systems. Supplied with a calibration certificate Technical characteristics of the antenna P6-134 Frequency range, GHz 50 – 75 Antenna gain in the frequency range, dB not less ≥ 22.5 Expanded uncertainty in measuring the effective area and gain (coverage factor = 2), dB ± 0.6 5 Polarization linear Microwave connector type waveguide Overall dimensions (including the fastening ring), mm 88 × 110 Weight 0.15 kg Operating temperature range -40 +50 C P6-134-1 configuration option: recommended for use with terminal devices having a waveguide input in accordance with GOST 13317-89 or devices with a waveguide input of the WR15 / RG-98 / U standard. The set includes a horn antenna P6-134 for the range of 50.0-75.0 GHz, a waveguide transition from a section of 3.76×1.88 mm to a section of 3.6×1.8 mm, a device for attaching to a tripod, and the necessary set of auxiliary options .P6-134-2 configuration option: recommended for use with terminal devices with V-type coaxial input and providing measurements in the frequency range 50.0-75.0 GHz. The set includes a horn antenna P6-134 of the range of 50.0-75.0 GHz, a coaxial-waveguide transition from a cross-section of 3.76×1.88 mm to a V-type coaxial, a measuring cable, a device for attaching to a tripod, and the necessary set of auxiliary options. Those. specifications The measuring horn antenna P6-134 is designed for receiving and transmitting linearly polarized signals in the range from 50.0 to 75.0 GHz.

P6-134 - measuring horn antenna

Measuring horn antenna P6-134 is designed for receiving and transmitting a linearly polarized signal in the range from 50.0 to 75.0 GHz. Structurally built according to the "optimal" horn scheme and has a waveguide output of rectangular section 3.76 x 1.88 mm. (WR15 / RG-98 / U standard). It has three basic configuration options P6-134-1, P6-134-2, P6-134-3 in accordance with the typical terminal devices used by the consumer. Features of P6-134: Recommended for metrological applications and experimental research. It has good non-uniformity of the gain and VSWR. Suitable for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Stable metrological characteristics allow using P6-134 as a transmitting antenna, in the configurations P6-134-1 and P6-134-2. Can be used in EMC and PEMIN evaluation systems. Supplied with a calibration certificate Technical characteristics of the antenna P6-134 Frequency range, GHz 50 – 75 Antenna gain in the frequency range, dB not less ≥ 22.5 Expanded uncertainty in measuring the effective area and gain (coverage factor = 2), dB ± 0.6 5 Polarization linear Microwave connector type waveguide Overall dimensions (including the fastening ring), mm 88 × 110 Weight 0.15 kg Operating temperature range -40 +50 C P6-134-1 configuration option: recommended for use with terminal devices having a waveguide input in accordance with GOST 13317-89 or devices with a waveguide input of the WR15 / RG-98 / U standard. The set includes a horn antenna P6-134 for the range of 50.0-75.0 GHz, a waveguide transition from a section of 3.76×1.88 mm to a section of 3.6×1.8 mm, a device for attaching to a tripod, and the necessary set of auxiliary options .P6-134-2 configuration option: recommended for use with terminal devices with V-type coaxial input and providing measurements in the frequency range 50.0-75.0 GHz. The set includes a horn antenna P6-134 of the range of 50.0-75.0 GHz, a coaxial-waveguide transition from a cross-section of 3.76×1.88 mm to a V-type coaxial, a measuring cable, a device for attaching to a tripod, and the necessary set of auxiliary options. Those. specifications The measuring horn antenna P6-134 is designed for receiving and transmitting linearly polarized signals in the range from 50.0 to 75.0 GHz.

P6-133 - measuring horn antenna

Measuring horn antenna P6-133 is designed for receiving and transmitting a linearly polarized signal in the range from 40.0 to 60.0 GHz. Structurally built according to the "optimal" horn scheme and has a rectangular waveguide output of 4.77 x 2.38 mm. (WR19 / RG-358 / U standard). It has two basic configuration options P6-133-1 and P6-133-2 in accordance with the typical terminal devices used by the consumer. Recommended for metrological applications and experimental research. Features of P6-133: Has good gain and VSWR unevenness. Suitable for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Stable metrological characteristics allow using P6-133 as a transmitting antenna, in configuration options P6-133-1 and P6-133-2. Can be used in EMC and PEMIN evaluation systems. Supplied with a calibration certificate Technical characteristics of the P6-133 antenna: Technical characteristics of the P6-133 antenna: Frequency range, GHz 40 – 60 Antenna gain in the frequency range, no less than ≥ 22.9 Expanded uncertainty in measuring the effective area and gain (coverage factor = 2) , dB ± 0.8 KSVN typical 1.5 Polarization linear Microwave connector type waveguide Overall dimensions (including the fastening ring), mm 88 × 152 Weight 0.20 kg Operating temperature range -40 +50 C Option P6-133-1: recommended for use with terminal devices with a waveguide input in accordance with the standard GOST13317-89 or devices with a waveguide WR19 / RG-358 / U standard input. The set includes a horn antenna P6-133 of the 40.0-60.0 GHz range, a waveguide transition from a section of 4.77×2.38 mm to a section of 5.2×2.6 mm, a device for attaching to a tripod, as well as the necessary set of auxiliary options .Completion option P6-133-2: recommended for use with terminal devices with coaxial V-type input and providing measurements in the frequency range 40.0-60.0 GHz. The set includes a horn antenna P6-133 for the 40.0-60.0 GHz range, a coaxial-waveguide transition from a cross-section of 4.77×2.38 mm to a V-type coaxial, a measuring cable, a device for attaching to a tripod, and the necessary set auxiliary options. Those. specifications The measuring horn antenna P6-133 is designed for receiving and transmitting linearly polarized signals in the range from 40.0 to 60.0 GHz.

P6-132 - measuring horn antenna

The measuring horn antenna P6-132 is designed for receiving and transmitting a linearly polarized signal in the range from 26.5 to 40.0 GHz. Structurally built according to the "optimal" horn scheme and has a waveguide output with a rectangular section of 7.11 x 3.55 mm. (WR28 / RG-96 / U standard). It has three basic configuration options P6-132-1, P6-132-2, P6-132-3 in accordance with the typical terminal devices used by the consumer. Recommended for metrological applications and experimental research. Features of P6-132: Has good gain and VSWR unevenness. Suitable for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Stable metrological characteristics allow using P6-132 as a transmitting antenna. Can be used in EMC and PEMI evaluation systems. Supplied with a calibration certificate. Technical characteristics of the antenna P6-132: Frequency range, GHz26 , 5 – 40 Antenna gain in the frequency range, dB not less than ≥ 23.6 Expanded uncertainty in measuring the effective area and gain (coverage factor = 2), dB ± 0.6 VSWR typical 1.5 Polarization linear Microwave connector type waveguide Overall dimensions (including the fastening ring), mm ⌀88 × 212 Weight 0.27 kg Operating temperature range -40 +50 C Option P6-132-1: Recommended for use with terminal devices with a waveguide input in accordance with the GOST 13317-89 standard or devices with a waveguide input of the WR28 / RG-96 / standard U. The set includes a horn antenna P6-132 of the 26.5-40 GHz range, a waveguide transition from a cross section of 7.11×3.55 mm to a section of 7.2×3.4 mm, a tripod mount device, and the necessary set of auxiliary options. complete set P6-132-2: Recommended for use with terminal devices having a coaxial input of the K-type and providing measurements in the frequency range 26.5-40 GHz. The set includes a horn antenna P6-132 of the 26.5-40 GHz range, a coaxial-waveguide transition from a cross-section of 7.11×3.55 mm to a K-type coaxial, a measuring cable, a device for attaching to a tripod, and the necessary set of auxiliary options … Those. specifications The measuring horn antenna P6-132 is designed for receiving and transmitting a linearly polarized signal in the range from 26.5 to 40.0 GHz.

P6-131 - measuring horn antenna

Measuring horn antenna P6-131 is designed for receiving and transmitting a linearly polarized signal in the range from 18 to 26.5 GHz. Structurally built according to the "optimal" horn scheme and has a waveguide output of rectangular section 10.67 x 4.32 mm. (standard WR42 / RG-53 / U). It has two basic configuration options P6-131-1 and P6-131-2, organized in accordance with the typical terminal devices used by the consumer. Recommended for metrological applications and experimental research. Features of P6-131: Has good gain and VSWR unevenness. Suitable for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Stable metrological characteristics allow using P6-131 as a transmitting antenna. Can be used in EMC and PEMI evaluation systems. Supplied with a calibration certificate. Technical characteristics of the P6-131 antenna: Frequency range, GHz from 18 to 26.5 Antenna gain in the frequency range, dB not less than ≥ 18.4 Expanded uncertainty in measuring the effective area and gain (coverage factor = 2), dB ± 0.6 SWR typical 1.5 Polarization linear Overall dimensions, mm 105 × 88 × 315 Mass 0.39 kg Range operating temperatures -40 +50 C Variant P6-131-1: Recommended for use with terminal devices having a waveguide input in accordance with the GOST 13317-89 standard or devices having a WR42 / RG-53 / U waveguide input. The set includes a horn antenna P6-131 for the range of 18-26.5 GHz, a waveguide transition from a section of 10.67×4.32 mm to a section of 11.0×5.5 mm, a device for attaching to a tripod, as well as the necessary set of auxiliary options. P6-131-2: Recommended for use with terminal devices with coaxial SMA or K-type input and providing measurements in the frequency range 18-26.5 GHz. The kit includes a P6-131 horn antenna for the 18-26.5 GHz range, a coaxial-waveguide transition from a section of 10.67×4.32 mm to a K-type coaxial, a measuring cable, a tripod mount device, and the necessary set of auxiliary options. Those. specifications The measuring horn antenna P6-131 is designed for receiving and transmitting linearly polarized signals in the range from 18 to 26.5 GHz.

P6-130 - broadband two-channel measuring horn antenna with biorthogonal circular polarization

Passive broadband measuring horn antenna P6-130, based on two orthogonally oriented H – shaped waveguides and a structurally integrated feeder system that forms an electromagnetic field of right or left polarization rotation, is designed to receive and transmit signals in the range from 18 to 40 GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, electromagnetic field radiation, study the polarization and phase characteristics of signals and the direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Introduced in GRSI under registration number 58705-14. Features P6-130: Ideal for measuring parameters and evaluating the characteristics of satellites and new types of RRS signals. Allows for measurements of ultra-wideband signals of short duration. Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. Allows to produce polarization characteristics of signals. Can be used in laboratory and field conditions, as well as on mobility devices. Supplied with a verification certificate. Antenna P6-130 specifications: Frequency range 18-40 GHz Gain ≥ 15.0 dBSWR typical 2.0 Polarization circular left and right rotation Error limits Ku ± 2.0 dB Microwave connector type K Ellipticity coefficient typical 2 dBmaximum 5 dB Dimensions 403 * 126 * 169 mm Operating mass 2.3 kg + 65 S Tech. specifications Passive broadband measuring horn antenna P6-130, based on two orthogonally oriented H – shaped waveguides and a structurally integrated feeder system that forms an electromagnetic field of right or left polarization rotation, is designed to receive and transmit signals in the range from 18 to 40 GHz.

P6-129 - broadband two-channel measuring horn antenna with biorthogonal linear polarization

The P6-129 broadband measuring horn antenna based on two orthogonally oriented H-shaped waveguides is designed for simultaneous reception or transmission of a linearly polarized signal in the range from 18 to 40 GHz due to the presence of two independent channels. Depending on the type of the connected terminal device, it can be used to measure the strength electromagnetic field or energy flux density, electromagnetic field radiation, studies of polarization and phase characteristics of signals and direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Supplied with a verification certificate. Included in the State Statistical Institute under registration number 58705-14. Features of P6-129: Provides convenience for measurements, as it eliminates additional electromechanical devices for orienting the antenna by polarization. Allows measurements of the parameters of ultra-wideband signals of short duration. Protection of terminal equipment from static electricity is provided by the antenna design (using a grounding device). Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. Operation is possible in laboratory and field conditions, as well as on means of mobility. Technical characteristics of the antenna P6-129: Frequency range 18-40 GHz Gain ≥ 12.0 dBSWR typical 2.0 Polarization linear , vertical, horizontal Error limits Ku ± 2.0 dB Microwave connector type C Cross-polarization level minus 20 dB Dimensions 380 * 126 * 126 mm Weight 2.3 kg Operating temperature range -40 + 65 C Tech. Specifications Range 18 to 40 GHz.

P6-128 - broadband measuring horn antenna

The P6-128 broadband measuring horn antenna based on the H-shaped waveguide is designed to receive and transmit a linearly polarized signal in the range from 12 to 40 GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, electromagnetic radiation field, determination of signal polarization and direction to the radiation source. Recommended for metrological applications and problems of EMC and PEMIN assessment. Included in the State Statistical Institute under registration number 58705-14. Features of P6-128: Allows measurements of ultra-wideband signals of short duration. Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. Protection of terminal equipment from static electricity is provided by the antenna design (using a grounding device). Possible operation in laboratory and field conditions, as well as on means of mobility. Supplied with a verification certificate. Technical characteristics of the antenna P6-128: Frequency range 12-40 GHz Gain ≥ 17.0 dBKSVN typical 2.0 Polarization linear Error limits Ku ± 2.0 dB Type of microwave connector K Dimensions 442 * 380 * 126 mm Weight1 , 3 kg Operating temperature range -40 + 65 С Tech. Specifications Frequency Range 12-40 GHz

P6-127 - broadband measuring horn antenna

The P6-127 precision broadband measuring horn antenna based on the H-shaped waveguide is designed to receive and transmit a linearly polarized signal in the range from 8 to 18 GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, radiation electromagnetic field, determination of signal polarization and direction to the radiation source. Recommended for metrological applications and problems of EMC and PEMIN assessment. Has a high degree of uniformity in gain and VSWR. Ideal for measuring the parameters of antenna devices and parameters of electromagnetic compatibility of radio electronic means. Features of P6-127: Stable metrological characteristics allow you to measure weak signals and generate an electromagnetic field with a high accuracy of field formation. Protection of terminal equipment from static electricity is provided by the design of the antenna (using grounding Can be used in laboratory and field conditions, as well as on mobility equipment Supplied with a calibration certificate Technical characteristics of the antenna P6-127: Frequency range 8-18 GHz Antenna gain in the frequency range, dB, ≥ 17.0 VSWN typical 2.0 Polarization linear Error limits Ku ± 1.5 dB Type of microwave connector SMA / N Dimensions 437 * 136 * 91 mm Weight 2.0 kg Operating temperature range -40 +65 C Tech. Specifications Frequency Range 8-18 GHz

P6-126 - broadband two-channel measuring horn antenna with biorthogonal circular polarization

Passive broadband measuring horn antenna P6-126, based on two orthogonally oriented H-shaped waveguides and a structurally integrated feeder system that forms an electromagnetic field of right or left polarization rotation. Designed to receive and transmit signals in the range from 2 to 15 (18) GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, electromagnetic field radiation, study the polarization and phase characteristics of signals and the direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Included in the State Statistical Institute under registration number 58705-14. Features of P6-126: Ideal for measuring parameters and evaluating the characteristics of satellites and new types of RRS signals. Allows measurements of ultra-wideband signals of short duration. Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. Allows to produce polarization characteristics of signals. Can be operated in laboratory and field conditions, as well as on mobility aids. Supplied with a verification certificate. Technical characteristics of the antenna P6-126: Frequency range 2-15 (18) GHz Gain ≥ 9.0 dB 2.0 dB Microwave connector type SMA Ellipticity coefficient typical 2 dBmaximum 5 dB Dimensions 442 * 208 * 174 mm Weight 2.9 kg Operating temperature range -40 + 65 С Tech. specifications Reception and transmission of a signal in the range. 2 to 15 (18) GHz.

P6-125 - Broadband two-channel measuring horn antenna with biorthogonal linear polarization

The broadband measuring horn antenna P6-125 based on two orthogonally oriented H-shaped waveguides is designed for simultaneous reception or transmission of a linearly polarized signal in the range from 2 to 18 GHz due to the presence of two independent channels. Depending on the type of the connected terminal device, it can be used to measure the strength electromagnetic field or energy flux density, electromagnetic field radiation, studies of polarization and phase characteristics of signals and direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Included in the State Statistical Institute under registration number 58705-14. Features of P6-125: Provides simultaneous reception of signals with vertical and horizontal polarization. Provides convenience of measurements, as it allows to exclude additional electromechanical devices for antenna polarization orientation. Allows to measure parameters of ultra-wideband signals of short duration. Protection of terminal equipment from static electricity is provided by the design antennas (using a grounding device) .Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. It can be used in laboratory and field conditions, as well as on mobility equipment. Supplied with a verification certificate. Technical characteristics of the antenna P6-125 : Frequency range 2-18 GHz Gain ≥ 11.0 dBSWR typical 2.0 Polarization linear, vertical, horizontal Error limits Ku ± 2.0 dB Microwave connector type SMA Cross-polar level isatsiminus 20 dB Dimensions 442 * 208 * 174 mm Weight 2.8 kg Operating temperature range -40 + 65 C Tech. Specifications Frequency range: 2 – 18 GHz

P6-125 - Broadband two-channel measuring horn antenna with biorthogonal linear polarization

The broadband measuring horn antenna P6-125 based on two orthogonally oriented H-shaped waveguides is designed for simultaneous reception or transmission of a linearly polarized signal in the range from 2 to 18 GHz due to the presence of two independent channels. Depending on the type of the connected terminal device, it can be used to measure the strength electromagnetic field or energy flux density, electromagnetic field radiation, studies of polarization and phase characteristics of signals and direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Included in the State Statistical Institute under registration number 58705-14. Features of P6-125: Provides simultaneous reception of signals with vertical and horizontal polarization. Provides convenience of measurements, as it allows to exclude additional electromechanical devices for antenna polarization orientation. Allows to measure parameters of ultra-wideband signals of short duration. Protection of terminal equipment from static electricity is provided by the design antennas (using a grounding device) .Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. It can be used in laboratory and field conditions, as well as on mobility equipment. Supplied with a verification certificate. Technical characteristics of the antenna P6-125 : Frequency range 2-18 GHz Gain ≥ 11.0 dBSWR typical 2.0 Polarization linear, vertical, horizontal Error limits Ku ± 2.0 dB Microwave connector type SMA Cross-polar level isatsiminus 20 dB Dimensions 442 * 208 * 174 mm Weight 2.8 kg Operating temperature range -40 + 65 C Tech. Specifications Frequency range: 2 – 18 GHz

P6-124 - broadband measuring horn antenna

The P6-124 broadband measuring horn antenna based on the H-shaped waveguide is designed to receive and transmit a linearly polarized signal in the range from 2 to 18 GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, electromagnetic radiation fields, determining the polarization of the signal and the direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Included in the State Statistical Institute under registration number 58705-14. Features of P6-124: Allows you to measure ultra-wideband signals of short duration. Stable metrological characteristics allow you to measure weak signals and generate an electromagnetic field without significant return loss. Protection of terminal equipment from static electricity is provided by the antenna design (using a grounding device). Possible operation in laboratory and field conditions, as well as on means of mobility. Supplied with a verification certificate. Technical characteristics of the P6-124 antenna: Frequency range 2-18 GHz Gain ≥ 10.0 dBKSVN typical 2.0 Polarization linear Error limits Ku ± 2.0 dB Microwave connector type SMA Dimensions 442 * 208 * 174 mm Weight2 , 8 kg Operating temperature range -40 + 65 С Tech. Specifications Frequency Range 2-18 GHz

P6-123 - broadband measuring horn antenna

The P6-123 broadband measuring horn antenna based on the H-shaped waveguide is designed to receive and transmit a linearly polarized signal in the range from 0.9 to 12 GHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, radiation of an electromagnetic field, determination of signal polarization and direction to the radiation source. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Included in the GRSI. Certificate No. 52901 dated 05.11.2013, under the name AIK 1-40B / 10. Features P6-123: Ideal for measuring radio interference. Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field without significant return loss. At the request of the customer supplied with N or SMA type microwave output connector. Can be used for measurements up to 18 GHz with an increase in Ku irregularity to 3dB from the typical value. Terminal equipment protection from static electricity is provided by the antenna design (using a grounding device). Can be used in laboratory and field conditions and also on aids of mobility. Supplied with a calibration or verification certificate. Technical characteristics of the P6-123 antenna: Frequency range, GHz from 0.9 to 12 Antenna gain in the frequency range, dB, ≥5.0 VSWN typical 2.5 Polarization linear Error limits Ku ± 2 dB Type Microwave connector SMA / N Dimensions 244 * 2 40 * 143 mm Weight 1.7 kg Operating temperature range -40 +65 C Tech. specifications Frequency range, GHz 0.9 to 12

P6-122M2 - ultra-wideband measuring log-periodic antenna

The ultra-wideband measuring log-periodic antenna G16-122M2 is designed to receive and transmit a linearly polarized signal in the range from 300 to 6000 MHz. Depending on the type of the connected terminal device, it can be used to measure the strength of the electromagnetic field or energy flux density, radiation of the electromagnetic field, to determine the polarization of the signal and the direction to the radiation source. Recommended for metrological applications and EMC and PEMI assessment tasks. Complies with GOST 22261-94. Those. Specifications Frequency range: 0.3 – 6 GHz

P6-122 - broadband measuring log-periodic antenna

Measuring log-periodic antenna P6-122 is intended for reception and transmission of linearly polarized signal in the range from 300 to 3000 MHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density, electromagnetic field radiation, signal polarization and direction to the radiation source. Recommended for metrological applications and problems of EMC and PEMI evaluation. Features of P6-122: The antenna beamwidth weakly depends on the frequency. Stable metrological characteristics allow using the antenna as a working standard. Protection of terminal equipment from static electricity is provided by the antenna design (with the use of a grounding device Operation in laboratory and field conditions, as well as on mobility aids is possible. At the request of the customer, it can be made in a waterproof design in accordance with the IP67 standard. It has various mounting options. It can be used as an element of multi-beam antenna arrays. Supplied with a verification certificate. It is included in the GRSI under registration number 58704-14. Technical characteristics of the P6-122 antenna: Range frequency 300-3000 MHz Gain ≥ 5.0 dBSWR typical 2.0 Polarization linear Error limits Ku ± 2.0 dB Microwave connector type SMA Dimensions 726 * 659 * 33 mm Weight 1.2 kg Operating temperature range -40 + 65 С Tech. Specifications Frequency Range 300-3000 MHz

P6-121M1 - broadband measuring biconical antenna

The broadband measuring biconical antenna P6-121M1 is designed to receive and transmit a linearly polarized signal in the range from 30 to 300 MHz. Depending on the type of the connected terminal device, it can be used to measure the electromagnetic field strength or energy flux density and electromagnetic field radiation. Stable metrological characteristics allow measure weak signals and generate an electromagnetic field with high strength accuracy. Recommended for metrological applications and EMC and PEMIN evaluation tasks. The antenna can be used for work in laboratory and field conditions, as well as in mobility aids. Complies with GOST 22261-94. Those. Specifications Frequency range: 30 – 300 MHz

P6-121 - foldable broadband measuring biconical antenna

The P6-121 wideband measuring biconical folding antenna is designed for receiving and transmitting a linearly polarized signal in the range from 30 to 300 MHz. Depending on the type of terminal device connected, it can be used to measure the electromagnetic field strength or the energy flux density and radiation of the electromagnetic field. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Introduced to the State Statistical Institute under registration number 58703-14. Features of P6-121: It has the properties of an electric dipole. Stable metrological characteristics allow measurements of weak signals and generate an electromagnetic field with high accuracy. Protection of terminal equipment from static electricity is provided by the antenna design (using a grounding device). Convenient for transportation when folded. Operation in laboratory and field conditions, as well as on means of mobility is possible. Supplied with a verification certificate. Technical characteristics of the antenna P6-121: Frequency range 30-300 MHz Calibration factor 10 to 25 dB (1 / m) VSWR typical 2.0 Polarization linear Error limits Кк ± 2, 0 dB Type of microwave connector SMA Dimensions 1327 * 501 * 501 mm Weight 1.2 kg Operating temperature range -40 + 65 C Tech. Specifications Frequency Range 30-300 MHz

P6-120 - measuring antenna for electric field

Receiving measuring active antenna P6-120 is designed to measure the electric field strength in the frequency range from 9 kHz to 30 MHz. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Features of P6-120: It has high dynamic characteristics. It can be used in laboratory and field conditions, as well as on mobility equipment. Supplied with a calibration certificate. Delivery with the blanking function of the active part is possible. Technical characteristics of the antenna P6-120: Frequency range from 9 kHz to 30 MHz Calibration factor -14 to 4.5 dB (1 / m) Field sensitivity 25 μA / m Error limits Kc ± 1.5 dB Supply voltage ± 15 V Current consumption ± 100 mA Microwave connector type SMA Dimensions 1476 * 688 * 688 mm Weight 5.0 kg Operating temperature range -40 + 65 S Tech. Specifications Frequency range 9 kHz to 30 MHz

P6-119 - magnetic field measuring antenna

Receiving measuring active antenna P6-119 is designed to measure the magnetic field strength in the frequency range from 9 kHz to 30 MHz. Recommended for metrological applications and EMC and PEMIN evaluation tasks. Features of P6-119: It has high dynamic characteristics. The diameter of the antenna frame is 599 mm. It can be used in laboratory and field conditions, as well as on aids. certificate. Delivery with blanking function of active part is possible. Technical characteristics of antenna P6-119: Frequency range from 9 kHz to 30 MHz Calibration coefficient from 27 to 24 dB (1 / m) Field sensitivity 25 μA / m Error limits Кк ± 1,5 dB Supply voltage ± 15 V Current consumption ± 100 mA Microwave connector type SMA Dimensions 84 * 599 * 683 mm Weight 2.5 kg Operating temperature range -40 + 65 C Tech. Specifications Frequency range 9 kHz to 30 MHz

ZA5-0.4 - reflector antenna system

The Mirror Antenna System ZA5-0.4 is a Cassegrain antenna system with a replaceable set of feeds for typical sections of the range from 26.5 to 110 GHz. The high quality of the antenna system is provided by precision metalworking equipment and a modern measuring base. The system is recommended for receiving radio signals of various communication lines, as well as for experimental studies. 1041 * 1500 mm Antenna system weight 2.6 kg Time of product deployment from transport state to operating state 15 min Time of changing the irradiation system 2 min Features ZA5-0.4 Provides signal reception and transmission over 6 sections of the frequency range from 26.5 to 110 GHz with various types of polarization : linear, double linear, circular right and left rotation, depending on the type of installed irradiator. Rapid change of the frequency range and type of polarization is carried out by installing replaceable irradiation systems. When replacing the irradiation system, additional settings of the counterreflector of the antenna system are not required. in the working range of The following irradiating systems can be used: irradiating systems OS-2 / L with linear polarization for the frequency range from 26.5 to 110 GHz The antenna systems supply program provides for the possibility of supplying in various configurations according to the ratings of the irradiating systems specified by the customer. it is completed with various types of azimuth-elevation rotary devices for various operating conditions. Those. specifications Frequency range, GHz 26.5 – 110

ZA1-0.3-18-40 - reflector antenna system

A broadband reflector antenna system with a diameter of 0.3 m (offset), with a fixed biorthogonal horn feed, is designed for the simultaneous reception or transmission of linearly polarized signals in the range from 18 to 40 GHz via two independent channels. Recommended for use as part of radio monitoring and radio engineering control. Features ZA1-0.3-18-40 It can be used in laboratory and field conditions, as well as on mobility equipment. Has a high gain for small dimensions. Can be supplied complete with manual or automatic A coordinate device Suitable for receiving signals from geostationary satellites. 8 to 1.7 Polarization: vertical, horizontal Polarization decoupling, in the frequency range, not worse, dB 18 Type of microwave connector K Dimensions 417 * 340 * 438 mm Weight 2.0 kg Tech. specifications Frequency range, GHz 18-40

ASP 1.0 - 18.0 - antenna system of the small-sized complex RTK with a circular view of space

Assignment of ASP 1.0-18.0 reception of electromagnetic waves with linear polarization in the frequency range 1 – 18 GHz in the circular azimuth sector of the view. ASP composition 1.0-18.0: antenna elements elements of the antenna-feeder path (switches, LNA, in-phase dividers power, attenuator, noise generator) radio-transparent casing Features of the ASP 1.0-18.0: the antenna system is made in the form of a circular antenna array; the 360-degree circular field of view is provided by six radiating elements by electronically commutating beams; the radiating element is an ultra-wideband log-periodic vibrator antenna ; simultaneous spatial scanning in 2 (or more) independent channels. Technical characteristics: Operating frequency range, GHZ Gain, dB, not less than 3 dB DN width, not less VSWR, not more 0 – 18.05.080 – 503.0-10 Tech. Specifications Frequency Range: 1GHz-18GHz

AC8.33.1-AC8.33.2 - helical antenna with polarizations of the form: circular left or right rotation

Features AC8.33.1 – AC8.33.2: Wide operating frequency band 0.9-18 (26) GHz Recommended as an element of multi-beam antenna arrays Supplied as part of multi-beam antenna arrays Technical characteristics: Frequency range, GHz 0.9-18 (26) Gain antennas in the frequency range, dB, not less than – 5 … + 5 Antenna gain error limits, dB ± 2 VSWR typical 2.0 Polarization circular Ellipticity coefficient typical 2 dBm 5 dB Type of microwave connector SMA Dimensions 100 * 35 mm Weight, kg, not more 0.2 Tech. specifications Frequency range, GHz 0.9-18 (26)

AC7.38 - broadband omnidirectional antenna

Passive broadband collapsible, omnidirectional antenna AC7.38, based on an asymmetric radiator, is designed to receive and transmit a vertically polarized signal in the range from 0.1 to 3 GHz. Recommended for use in radio and radio control and monitoring equipment as a detection antenna. Features of АС7.38: Has a wide frequency range. Provides a circular radiation pattern. Operation on aids of mobility is possible. Has a small weight and dimensions. Collapsible design allows easy transportation. Technical characteristics of the АС7.38 antenna: Frequency range 0.1 – 3 GHz. calibration from 22 to 42 dB (1 / m) VSWR typical not standardized Error limits Kc ± 2.5 dB Polarization vertical Irregularity of DN typical ± 5 dB Type of microwave connector SMA Dimensions in working position 1010 * 1000 mm Weight 1.2 kg Operating temperature range -40 + 50 С Tech. Specifications Frequency Range 0.1 – 3 GHz

AC7.24 - broadband omnidirectional antenna

Passive broadband omnidirectional antenna AC7.24, based on an asymmetric radiator, is designed to receive and transmit a vertically polarized signal in the range from 18 to 40 GHz. Recommended for use in radio and radio control and monitoring equipment as a detection antenna. Features of АС7.24: It has a wide frequency range. Provides a circular directional pattern. It can be operated on means of mobility. It can be used in EMC and PEMI assessment systems. It has a small weight and dimensions. Technical characteristics of the АС7.24 antenna: Frequency range, GHz18 – 40 GHz. gain, dB ≥ 3KSVN typical 2.0 Polarization vertical Microwave connector type K Dimensions 60 * 47 * 29 mm Weight 0.5 kg Operating temperature range -40 +65 C Tech. specifications Frequency range, GHz 18 – 40 GHz

AC7.23M - broadband omnidirectional antenna

Passive broadband omnidirectional antenna AC7.23M, based on an asymmetric radiator, is designed to receive and transmit a vertically polarized signal in the range from 1 to 18 GHz. Recommended for use in radio and electronic control and monitoring equipment as a detection antenna. Features of AC7.23M: It has a wide frequency range. Provides a circular directional pattern. It can be used on mobility equipment. It can be used in EMC and PEMI evaluation systems. It has a low weight. and dimensions. Technical characteristics of the AC7.23M antenna: Frequency range, GHz1 (3) – 18 GHz Gain ≥ 0.5 dBSWR typical 2.0 Polarization vertical Microwave connector type SMA Dimensions D = 98, h = 110 mm Weight 0.8 kg Operating temperature range -40 +50 С … specifications Frequency range, GHz1 (3) – 18 GHz

AC7.23 - broadband omnidirectional antenna

Passive broadband omnidirectional antenna AC7.23, based on an asymmetric radiator, is designed to receive and transmit a vertically polarized signal in the range from 1 to 18 GHz. Recommended for use in radio and electronic control and monitoring equipment as a detection antenna. Features of AC7.23: It has a wide frequency range. Provides a circular directional pattern. It can be used on mobility equipment. It can be used in EMC and PEMI evaluation systems. It has a low weight. and dimensions. Technical characteristics of the AC7.23 antenna: Frequency range, GHz1 (3) – 18 GHz Calibration factor from 39 to 61 dB (m-1) VSWR typical 2.0 Polarization vertical Microwave connector type SMA Dimensions 116 * 110 * 59 mm Weight 1.2 kg Operating temperature range -40 +65 S Tech. specifications Frequency range, GHz1 (3) – 18 GHz

AC7.22 - broadband omnidirectional antenna

The AC7.22 passive broadband omnidirectional antenna based on a single-ended radiator is designed to receive and transmit a vertically polarized signal in the range from 0.3 to 2 GHz. Recommended for use in radio and radio control and monitoring equipment as a detection antenna. Features of AC7.22: Wide frequency range. Provides a circular directivity pattern. Can be used on mobility equipment. Has a small weight and dimensions. AC7.22 antenna specifications: Frequency range 0.3 – 2 GHz Calibration factor 21 to 39 dB (1 / m) VSWR typical 2.0 Error limits Kc ± 2.5 dB Polarization omnidirectional Irregularity of the antenna pattern typical 0.5 dB Microwave connector type SMA Dimensions 321 * 280 mm Operating temperature 1.0 kg Range -40 + 65 S Tech. Specifications Frequency Range: 300 – 2000 MHz

AC4.31 - broadband log-periodic antenna

Small-sized broadband log-periodic antenna AC4.31 is designed for receiving and transmitting linearly polarized signals in the range from 1.0 to 18.0 GHz. Ideal for measuring field parameters in tasks of RFC and GOS services, as well as for certification of RRS communication systems. Has a protective radio-transparent casing. Features of AC4.31: Operation in laboratory and field conditions, as well as on aids of mobility is possible. At the request of the customer, it can be manufactured in a waterproof design in accordance with the IP67 standard. It can be used as an element of multi-beam antenna arrays. It can be used in EMC and PEMI evaluation systems. It has a small weight and dimensions. It is supplied with a calibration certificate. Technical characteristics of the AC4.31 antenna: Range frequency1 – 18 GHz Gain, dB, ≥ 4.0 KSVN typical 2.5 Polarization linear Error limits Ku ± 2 dB Type of microwave connector SMA Dimensions 306 * 198 * 88 mm Weight 1.2 kg Operating temperature range -40 +65 С Tech. Specifications Frequency range: 1.0 to 18.0 GHz.

AC4.30 - log-periodic antenna

The small-sized log-periodic antenna AC4.30 is designed to receive and transmit a linearly polarized signal in the range from 1.0 to 8.2 GHz. It is ideal for measuring field parameters in tasks of RFC and GOS services. It has a protective radio-transparent casing. Operation is possible in laboratory and field conditions, as well as on mobility aids. At the request of the customer, it can be manufactured in a waterproof design in accordance with the IP67 standard. It can be used as an element of multi-beam antenna arrays. It can be used in EMC and PEMI evaluation systems. It has a small weight and dimensions. It is supplied with a calibration certificate. Technical characteristics of the AC4.30 antenna Frequency range1 – 8.2 GHz Gain, dB, ≥4.0 KSVN typical 2.5 Polarization linear Error limits Ku ± 2 dB Type of microwave connector SMA Dimensions 306 * 198 * 88 mm Weight 1.2 kg Operating temperature range -40 +65 С Tech. Specifications Frequency Range: 1GHz-8.2GHz

AC2.53 - dipole antenna

The reconfigurable dipole antenna is designed to form an electromagnetic field in the frequency range 3 – 300 MHz in three parts of the range: 3 – 30 MHz, 30 – 100 MHz, 100 – 300 MHz. It can be used in research laboratories and test ranges. The antenna can connect to all types of RF signal generators in the frequency range 3 – 300 MHz. Technical characteristics of the AC2.53 antenna: Frequency range * 3 – 300 MHz Weight 8 kg Mast height from 2 to 6 mMax dipole linear size less than 4 m Polarization linear (horizontal) Weight 8 kg Operating temperature range -40 +50 С * Frequency range: Section A (dipole length 4 m) 3 – 30 MHz Section B (dipole length 2 m) 30 – 100 MHz Section B (dipole length 1 m) 100 – 300 MHz Gain: KU in section A, not less than minus 40 dBKU in section B, not less than minus 10 dBKU in section C, not less than minus 5 dB Tech. Specifications Frequency range: 3 – 300 MHz

AO6.36.1-AO6.36.18 - single-mode horn feeds with a beam pattern width of 0.1-100 °

Features of AO6.36.1-AO6.36.18: 18 types of single-mode horn feeds are produced for sections of the range X, Ku, K, Ka, Q (B), U from 8.2 to 60 GHz with a BP width at the level of 0.1 – 100 ° ; Irradiators are intended for use in applications requiring high BP symmetry, low VSWR and low side lobes; Irradiators are ideal for use in parabolic and offset antennas and Cassegrain antennas with almost any F / D ratio. Specifications AO6.36.1-AO6 .36.18: The width of the pattern at the level – 100 °; The level of the side lobes from the main one (dB no more) – 30; VSWR (no more) – 1.3. Those. Specifications Frequency Range: 8.2GHz-90GHz

AO6.35.1-AO6.35.18 - single-mode horn feeds with a beam pattern width of 0.1-55 °

Features of AO6.35.1-AO6.35.18: 18 types of single-mode horn feeds are produced for sections of the range X, Ku, K, Ka, Q (B), U from 8.2 to 60 GHz with a BP width at the level of 0.1 – 55 ° ; The irradiators are intended for use in applications requiring high BP symmetry, low VSWR and low side lobes; The irradiators are ideal for use in parabolic and offset antennas and Cassegrain antennas with almost any F / D ratio. Those. specifications Technical characteristics AO6.35.1-AO6.35.18: DN width at the level – 0.1-55 °; Side-lobe level from the main one (dB no more) – 30; VSWR (no more) – 1.3.

AO6.27 - horn biorthogonal feed

Technical characteristics of AO6.27: Frequency range, GHz from 18 to 40 Gain in the frequency range, dB, not less than 12.0 Limits of irradiation factor error, dB ± 2 Input VSWR, not more than 2.5 Level of cross-polarization component, dB, not less than minus 18 Type connector K type Weight, kg, no more than 0.3 Tech. Specifications Frequency range: 18 – 40 GHz

OptiSwitch 4G16-153-U-S1-R114
OptiSwitch 4G16-135-U-S1-R114
OptiSwitch 4G16-147-U-S1-R114
OptiSwitch 4G40-519-U-S1-R214
OptiSwitch 4G40-368-U-S1-R214
Switch automatic modular OptiDin BM63-1C32-ОМ4-REG

Modular automatic 1-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 32 A.

Switch automatic modular OptiDin BM63-1C25-ОМ4-REG

Modular automatic 1-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 25 A.

Switch automatic modular OptiDin BM63-1C16-ОМ4-REG

Modular automatic 1-pole AC switch with a maximum switching capacity at AC 6 kA for a rated current of 16 A.

Switch automatic modular OptiDin BM63-1C6-ОМ4-REG

Modular automatic 1-pole AC switch with a maximum switching capacity at AC 6 kA for a rated current of 6 A.

OptiSwitch 4G10-110-U-S1-R014
Contactor PML-1561DM-16A-42AC-UHL4-B-KEAZ

Contactor with a 42 V AC coil for a rated current of 16 A.

Packet cam switch PP53-16-1-409-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

OptiSwitch 4G10-3504-U-R014
OptiSwitch 4G10-2505-U-R014
Automatic switch VA51-35M1-340010-63A-800-440DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 63 A.

Automatic switch VA04-36-341830-400A-4000-690AC-NR24AC / DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-35-341830-160A-1600-690AC-NR24DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-341830-80A-800-690AC-NR24DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA53-41-344710-400A-690AC-NR400AC-UHL3-KEAZ (Rear connection)

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-39-341210-800A-5000-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 800 A. Those. specification 400.0

Automatic switch VA57-39-341810-800A-5000-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 800 A. Those. specification 400.0

Automatic switch VA55-41-344710-250A-690AC-NR400AC-UHL3

Block automatic 3-pole AC switch with a maximum switching capacity at AC 55 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-341510-250A-2500-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch AE2043M-320-16A-12Iн-400AC-NR24AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 35 kA for a rated current of 16 A.

Automatic switch VA57-35-341810-160A-1000-690AC-NR230AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Fuse PC31UD69V400A- (B300013C) -KEAZ-FERRAZ
Fuse PC31UD69V500A- (D300015C) -KEAZ-FERRAZ
OptiSwitch 4G16-157-U-S5-0
Automatic switch VA57-35-341210-25A-320-690AC-NR230AC / 220DC-UHL3-KZNO6-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 9 kA for a rated current of 25 A. Those. specification 400.0

Automatic switch VA57-35-644710-80A-1250-440DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 80 A.

OptiSwitch 4G10-53-U-S1-R012
Automatic switch VA57-35-341810-160A-500-690AC-NR230AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

OptiSwitch 4G10-95-U-S1-R014
Contactor PML-2161M-25A-42AC-UHL4-B-KEAZ

Contactor with a 42 V AC coil for a rated current of 25 A.

Contactor PML-1161M-10A-42AC-UHL4-B-KEAZ

Contactor with a 42 V AC coil for a rated current of 10 A.

Packet cam switch PP53-25-1-165-1-UHL3-KEAZ

Cam switch for rated current 25 A with selector handle.

Fuse PP60S-39T0-630A-UHL3-KEAZ

Fuse for rated current 630 A, in which the power loss is 110 W.

Fuse PP60S-39T0-630A-UHL3-KEAZ

Fuse for rated current 630 A, in which the power loss is 110 W.

Automatic switch VA57-35-341510-160A-1000-690AC-RNN400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch A57-39-345415-500A-2000-690AC-RNN230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-35-344750-125A-800-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-35-344750-50A-500-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-344750-31.5A-400-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 31.5 A. Those. specification 400.0

Automatic switch VA57-39-341810-630A-5000-690AC-NR400AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Batch switch PP53-16-1-385-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA04-36-341810-250A-1500-690AC-NR110AC / DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

Switch AK50KB-2MG, 16.00 / 5, fastening behind the panel, TU16-522.024-80
Switch AK50KB-2MG, 10,00 / 5, fastening behind the panel, TU16-522.024-80
Switch AK50KB-2MG, 6,30 / 5, fastening behind the panel, TU16-522.024-80
Automatic switch VA57-39-341810-500A-5000-690AC-NR230AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

OptiSwitch 4G16-84-U-R114
AK50KB-1MG switch, constant, 4,00 / 5, TU16-522.024-80
Automatic switch VA57-31-340010-100A-800-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-31-340010-80A-400-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-31-340010-40A-400-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-31-340010-40A-400-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-31-341810-80A-400-690AC-NR400AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-31-341810-80A-400-690AC-NR400AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-31-341810-100A-800-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-31-341810-100A-400-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-31-341810-31.5A-400-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 31.5 A. Those. specification 400.0

Switch AK50B-3MGOM2, 50Hz, 20A, 6Iн, IP54 (with glands), TU16-522.136-78
Automatic switch VA57-31-341810-40A-400-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-31-341810-80A-400-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-344710-125A-800-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-35-341810-80A-800-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-340010-125A-800-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-39-344516-250A-1000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic circuit breaker VA21-29V-321810-1.6A-12Iн-690AC-NR220AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 1.6 A. Those. specification 400.0

Automatic circuit breaker VA21-29V-321810-4A-12Iн-690AC-NR220AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 4 A. Those. specification 400.0

Automatic switch VA21-29V-321810-5A-12Iн-690AC-NR220AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 5 A. Those. specification 400.0

Automatic circuit breaker VA21-29V-321810-6,3A-12Iн-690AC-NR220AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 6.3 A. Those. specification 400.0

Automatic switch VA21-29V-321810-10A-12Iн-690AC-NR220AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 10 A. Those. specification 400.0

Automatic switch VA21-29V-321810-16A-12Iн-690AC-NR220AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch VA57-35-344610-31.5A-160-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 31.5 A. Those. specification 400.0

Automatic circuit breaker VA57-35-341210-63A-800-690AC-NR230AC / 220DC-UHL3-KZ№6-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Packet cam switch PP53-16-1-047-5-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Actuator PML-2230-25A-380AC- (18-25A) -UHL2-B-KEAZ

A starter with a 220 V AC coil for a rated current of 25 A.

Actuator PML-2230-25A-220AC- (18-25A) -UHL2-B-KEAZ

A starter with a 220 V AC coil for a rated current of 25 A.

OptiSwitch 4G25-9501-U-R114
Actuator PML-4620-63A-220AS- (47-64A) -UHL2-B-KEAZ

A starter with a 220 V AC coil for a rated current of 63 A.

Actuator PML-1220-10A-220AC- (1,25-2A) -UHL3-B-KEAZ

A starter with a 220 V AC coil for a rated current of 10 A.

OptiSwitch 4G63 / 100-69-U-R214
OptiSwitch 4G40-69-U-R214
Load break switch VA04-36-301130-250A-690AC / 440DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC / DC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

OptiSwitch 4G40-108-OU-R014 switch
Automatic circuit breaker AP50B-3T-40A-400AC-2P-U3-AES-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 3 kA for a rated current of 40 A.

Automatic switch VA04-36-340010-20A-250-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 3 kA for a rated current of 20 A. Those. specification 400.0

Automatic switch VA04-36-340010-40A-500-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at alternating current 8 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA04-36-340010-50A-600-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 8 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA04-36-340010-50A-600-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 8 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-39-345670-630A-5000-690AC-RMN230AC-PE230AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-345670-320A-3200-690AC-RMN230AC-PE230AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 320 A. Those. specification 400.0

Automatic switch VA57-35-345670-250A-2500-690AC-RMN230AC-PE230AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Fuse BS17GB69V25- (Z220960J) -KEAZ-FERRAZ
Automatic switch VA57-35-641810-80A-1000-440DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 80 A.

AK50KB-3M switch, 2.00 / 5, fastening behind the panel, TU16-522.024-80
Contactor PML-1161DM-16A-110AC-UHL4-B-KEAZ

Contactor with a 110 V DC coil for a rated current of 16 A.

Automatic switch VA57-35-341110-80A-630-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

OptiSwitch 4G10-4504-U-S1-R014
Automatic switch OptiMat A2500N-D-MR7-N-PD2-KS-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2500N-D-MR7-N-PD2-KS-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A1600N-D-MR7-N-PD2-KS-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A2500N-D-MR8-N-PD2-KS-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A1600N-D-MR8-N-PD2-KS-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch VA04-36-341810-100A-1250-690AC-NR220..240AC / 220DC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-340010-250A-630-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA04-36-330010-400A-4000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-35-332510-250A-2500-690AC-RNN230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-332510-250A-2500-690AC-RNN230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA53-41-331810-630A-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA53-41-331810-630A-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 630 A. Those. specification 400.0

Vacuum switch OptiMat V-12-F-25-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-E-25-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-P-25-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-F-25-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-E-25-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-P-25-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-25-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-25-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-25-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-25-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-25-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-25-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-20-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-20-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-20-1250-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-20-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-20-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-20-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-12,5-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-12,5-630-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-8-400-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-8-400-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-8-400-OP1-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Automatic switch VA57-39-341870-630A-5000-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-341870-400A-4000-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Contactor PML-5100-125A-240AC-UHL4-B-KEAZ

Contactor with a 240 V AC coil for a rated current of 125 A.

Contactor PML-4100-63A-240AC-UHL4-B-KEAZ

Contactor with a 240 V AC coil for a rated current of 63 A.

Contactor PML-1100-10A-240AC-UHL4-B-KEAZ

Contactor with a 240 V AC coil for a rated current of 10 A.

Contactor PML-2100-25A-240AC-UHL4-B-KEAZ

Contactor with a 240 V AC coil for a rated current of 25 A.

Fuse PC73UD13C700TF- (R300510A) -KEAZ-FERRAZ
Packet cam switch PP53-16-1-306-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA57-35-342510-160A-800-690AC-RNN400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Pole mounting kit OptiBox PU-200
Automatic switch VA51-35M1-340010-100A-800-440DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 100 A.

Packet cam switch PP53-16-1-003-5-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA57-35-344630-63A-1250-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Vacuum switch OptiMat V-12-F-25-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-E-25-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-P-25-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-F-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-E-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-12-P-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-25-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-25-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-25-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-25-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-20-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-20-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-20-1250-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-20-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-20-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-20-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-12,5-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-12,5-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-12,5-630-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-F-8-400-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-E-8-400-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Vacuum switch OptiMat V-07-P-8-400-OP3-000-0-U3

Vacuum 3-pole circuit breaker with climatic modification U3.

Actuator PML-1621-10A-24AS- (0,61-1A) -UHL2-B-KEAZ

A starter with a 24 V AC coil for a rated current of 10 A.

Automatic switch VA51-35M1-340016-100A-1250-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 100 A. Those. specification 400.0

High-voltage insulator OptiIsol-IP-125 / 10-13-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-10-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-09-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-08-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-125 / 10-00-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-13-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-10-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-09-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-08-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-115 / 10-00-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

Fusible link PPN-37-X3-2-25A-UHL3-KEAZ

Blade-type fuse for rated current 1600 A, size 2 and power loss 134 W.

Fusible link PPN-37-X3-2-25A-UHL3-KEAZ

Blade-type fuse for rated current 1600 A, size 2 and power loss 134 W.

Automatic switch VA57-35-641810-200A-2500-440DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 200 A.

Automatic switch OptiMat A4000N-D-MR7-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR7-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR7-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR7-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR7-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR7-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A800N-D-MR7-B-KS-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR7-B-KS-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch OptiMat A630N-D-MR7-B-KS-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch OptiMat A4000N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2000N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1250N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A800N-D-MR8-B-KS-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Switch automatic OptiMat A630N-D-MR8-B-KS-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch OptiMat A4000N-D-MR7-B-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR7-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR7-B-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR7-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR7-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR7-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR7-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR7-B-Z-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR7-B-З-ИШ-У3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch OptiMat A3200N-D-MR8-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR8-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR8-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR8-B-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR8-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR8-B-З-ИШ-У3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR8-B-З-ИШ-У3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR8-B-З-ИШ-У3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch OptiMat A4000N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR7-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR7-B-PD2-Z-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR7-B-PD2-Z-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch OptiMat A4000N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR8-B-PD2-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR8-B-PD2-Z-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR8-B-PD2-Z-ISH-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

OptiSwitch 4G16-742-U-R114
Fuse PC73UD10C1000TF- (V300513A) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Automatic switch VA04-36-331110-250A-1000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA04-36-331110-250A-2500-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA51-35M3-341130-400A-4000-690AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 400 A. Those. specification 400.0

OptiSwitch 4G10-3001-U-R012
Automatic switch VA57-31-341210-31.5A-400-690AC-NR110DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 31.5 A. Those. specification 400.0

Automatic switch VA57-39-340010-500A-4000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-35-341210-125A-500-690AC-NR24DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-35-341210-125A-500-690AC-NR24DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch OptiMat A4000N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A4000N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1250N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR8-B-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR8-B-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR8-B-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Automatic switch VA57-39-340016-800A-5000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 800 A. Those. specification 400.0

Disconnector PE19-43-31140-1600A-L325-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1600 A, with a fixed handle, and mechanical durability of 6300 cycles.

Disconnector PE19-43-31140-1600A-L255-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1600 A, with a fixed handle, and mechanical durability of 6300 cycles.

Automatic switch VA21-29V-241110-1.6A-6In-690AC-U3-KEAZ

Block automatic 2-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 1.6 A. Those. specification 400.0

Disconnector PE19-43-31140-1600A-L222-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1600 A, with a fixed handle, and mechanical durability of 6300 cycles.

Disconnector PE19-41-31140-1000A-L325-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1000 A, with a fixed handle, and mechanical durability is 6300 cycles.

Disconnector PE19-41-31140-1000A-L255-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1000 A, with a fixed handle, and mechanical durability is 6300 cycles.

Disconnector PE19-43-31140-1600A-L175-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1600 A, with a fixed handle, and mechanical durability of 6300 cycles.

Disconnector PE19-41-31140-1000A-L222-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1000 A, with a fixed handle, and mechanical durability is 6300 cycles.

Disconnector PE19-41-31140-1000A-L175-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1000 A, with a fixed handle, and mechanical durability is 6300 cycles.

Automatic switch OptiMat A4000N-D-MR8-B-PD2-MR-Z-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch VA57-39-344750-630A-2500-690AC-NR400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-344730-800A-5000-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 800 A. Those. specification 400.0

Contactor PML-2100-25A-380AC-UHL4-A-KEAZ

Contactor with 380 V AC coil for rated current 25 A.

Contactor PML-1100-10A-24AC-UHL4-A-KEAZ

Contactor with a 24 V AC coil for a rated current of 10 A.

Automatic switch VA57-35-840010-250A-1000-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 250 A.

Automatic switch VA57-35-331210-250A-500-690AC-NR400AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic circuit breaker VA57-35-344730-16A-160-690AC-NR230AC / 220DC-PE230AC-UHL3-AES-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 3.5 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch AP50B-3MT-16A-10Iн-400AC-2P-IP54-U2-AES-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 16 A.

Automatic switch VA57-39-344750-400A-1600-690AC-NR400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Contactor PML-1161DM-16A-36AC-UHL4-A-KEAZ

Contactor with a 36 V AC coil for a rated current of 16 A.

Contactor PML-1160DM-16A-380AC-UHL4-A-KEAZ

Contactor with 380 V AC coil for rated current 16 A.

Contactor PML-1160DM-16A-36AC-UHL4-A-KEAZ

Contactor with a 36 V AC coil for a rated current of 16 A.

Contactor PML-1160DM-16A-36AC-UHL4-A-KEAZ

Contactor with a 36 V AC coil for a rated current of 16 A.

Automatic switch VA55-41-335210-1000A-690AC-NR400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 1000 A. Those. specification 400.0

Automatic switch VA57-35-641130-250A-2500-440DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole DC circuit breaker with limit switching capacity at constant current kA for rated current 250 A.

Automatic circuit breaker AP50B-2M3TD-16A-10Iн-400AC-NR400AC-1P-U3-AES-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 16 A.

Contactor PML-5165DM-100A-24DC-UHL4-B-KEAZ

Contactor with a 24 V DC coil for a rated current of 100 A.

Packet cam switch PP53-16-1-080-2-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA55-41-335230-1000A-690AC-NR400AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 1000 A. Those. specification 400.0

Automatic switch VA55-43-330016-2000A-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 63 kA for a rated current of 2000 A. Those. specification 400.0

Automatic switch VA57-31-840010-100A-500-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 100 A.

Fuse PC72GB69V550D1A- (L301724C) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Automatic switch VA57-35-641110-250A-2500-440DC-UHL3-KEAZ

Block automatic 3-pole DC circuit breaker with limit switching capacity at constant current kA for rated current 250 A.

Automatic switch VA55-41-344716-400A-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-35-840010-250A-750-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 250 A.

Automatic circuit breaker VA21-29-342810-31.5A-12Iн-400AC-NR24AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 31.5 A.

Switch AK50B-2MGOM3, constant, 20A, 12Iн, TU16-522.136-78
Screw bridge OptiClip SCBI-10-8,15-ISO
Automatic switch VA53-41-344610-400A-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 400 A. Those. specification 400.0

Contactor PM12-016150-16A-24AC-UHL4-V-KEAZ

Contactor with a 24 V AC coil for a rated current of 16 A.

Contactor PML-2110-25A-42AC-UHL4-B-KEAZ

Contactor with a 42 V AC coil for a rated current of 25 A.

Actuator PML-2210-25A-380AC- (13-19A) -UHL2-B-KEAZ

A starter with a 380 V alternating current control coil for a rated current of 25 A.

Actuator PML-2210-25A-380AC- (13-19A) -UHL2-B-KEAZ

A starter with a 380 V alternating current control coil for a rated current of 25 A.

Actuator PML-4220-63A-220AC- (37-50A) -UHL3-B-KEAZ

A starter with a 220 V AC coil for a rated current of 63 A.

Contactor PML-7500-250A-110AC-UHL4-B-KEAZ

Contactor with a 110 V AC coil for a rated current of 250 A.

Actuator PML-3210-40A-36AS- (30-41A) -UHL2-B-KEAZ

A starter with a 36 V AC coil for a rated current of 40 A.

Automatic switch VA57-35-831110-250A-1600-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 250 A.

Automatic switch VA57-35-340010-160A-1600-690AC-UHL3-KZNo.6-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-340010-125A-1250-690AC-UHL3-KZNo.6-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-35-340010-100A-1250-690AC-UHL3-KZNo.6-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-340010-63A-1250-690AC-UHL3-KZNo.6-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA57-35-340010-40A-630-690AC-UHL3-KZNo.6-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-35-340010-25A-320-690AC-UHL3-KZNo.6-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 9 kA for a rated current of 25 A. Those. specification 400.0

Disconnector RS-4 / 1L-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 400 A.

Disconnector RS-4 / 1L-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 400 A.

Disconnector RS-4 / 1P-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 400 A.

Disconnector RS-2 / 1L-U3-KEAZ

High-voltage 3-pole AC disconnector with a rated current of 250 A.

Disconnector RS-1 / 1P-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 100 A.

Disconnector RS-1 / 1L-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 100 A.

Disconnector RB-4 / 1P-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 400 A.

Disconnector RB-2 / 1P-U3-KEAZ

High-voltage 3-pole AC disconnector with a rated current of 250 A.

Disconnector RB-2 / 1L-U3-KEAZ

High-voltage 3-pole AC disconnector with a rated current of 250 A.

Disconnector RB-1 / 1P-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 100 A.

Disconnector RB-1 / 1L-U3-KEAZ

High-voltage 3-pole AC disconnector for rated current 100 A.

OptiSwitch 4G16-771-U-R114
OptiSwitch 4G16-713-U-R114
OptiSwitch 4G10-623-U-S6-R012
OptiSwitch 4G10-573-U-S6-R012
Automatic switch VA53-41-334610-400A-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-35-641810-160A-1000-440DC-NR24DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 160 A.

Automatic switch VA57-39-344730-500A-4000-690AC-NR24DC-PE400AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-35-342530-200A-2000-690AC-RNN230AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA57-35-340015-100A-630-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Packet cam switch PP53-16-1-103-1-UHLZ-KEAZ

Cam switch for rated current 16 A with selector handle.

OptiSwitch 4G40-10-U-S6-R214
Automatic switch VA51-35M1-340016-16A-125-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 3 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch VA51-35M1-340016-16A-250-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 3 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch VA51-35M1-340016-16A-250-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 3 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch VA57-39-340016-320A-1600-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 320 A. Those. specification 400.0

Automatic switch VA57-39-340016-400A-2500-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA51-35M1-341810-20A-250-690AC-NR220..240AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 3 kA for a rated current of 20 A. Those. specification 400.0

OptiSwitch 4G10-4503-U-R014
Automatic switch VA57-35-344730-80A-800-690AC-NR24DC-PE400AC-OM4-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA21-29V-341110-1.6A-6In-690AC-U3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 1.6 A. Those. specification 400.0

Automatic circuit breaker VA21-29-221110-80A-12Iн-400AC-З / P-U3-AES-KEAZ

Block automatic 2-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A.

Automatic switch AP50B-2MT-4A-3,5Iн-400AC / 220DC-IP54-U2-AES-KEAZ

Block automatic 2-pole AC / DC switch with a maximum switching capacity at AC 40 kA for a rated current of 4 A.

Switch AK50B-3MGOM2, 50Hz, 6,3A, 6Iн, IP54 (with cable glands), TU16-522.136-78
OptiSwitch 4G16-75-U-S1-R114
Automatic switch OptiMat A1000N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A1600N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A2500N-D-MR8-B-KS-ISH-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch VA57-39-341210-320A-2500-690AC-NR400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 320 A. Those. specification 400.0

High-voltage insulator OptiIsol-IP-421 / 35-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol-IP-606 / 35-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol-IP-338 / 20-01-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol-IP-218 / 20-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-330 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-310 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-310 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-300 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-268 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-268 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-266 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-260 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-251 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-250 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-188 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-188 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-188 / 10-00-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-13-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-10-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-09-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-08-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-200 / 10-00-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-13-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-10-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-09-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-08-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol-IP-190 / 10-00-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-350 / 35-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-350 / 35-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-350 / 35-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-350 / 35-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-350 / 35-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-350 / 35-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-350 / 35-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-320 / 35-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 35000 V.

High-voltage insulator OptiIsol IO-210 / 20-07-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-06-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-05-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-04-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-03-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-02-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-01-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-210 / 20-01-UHL2

High-voltage insulator for rated operating voltage of AC 20,000 V.

High-voltage insulator OptiIsol IO-130 / 10-29-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-28-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-27-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-26-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-25-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-23-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-22-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-21-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-20-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-19-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-19-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-18-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-17-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-16-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-15-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-14-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-13-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-10-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-09-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-08-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-02-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-130 / 10-01-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-29-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-28-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-27-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-26-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-25-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-24-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-23-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-22-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-20-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-19-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-18-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-17-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-16-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-15-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-14-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-12-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-11-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-10-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-09-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-08-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-07-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-06-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-05-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-04-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

High-voltage insulator OptiIsol IO-124 / 10-03-UHL2

High-voltage insulator for rated operating voltage of alternating current 10000 V.

OptiSwitch 4G40-51-U-S1-R214

Open 1-pole cam switch for rated current 40 A with 3 handle positions. Those. specification 400.0

OptiSwitch 4G10-97-U-R014

Open 2-pole cam switch for rated current 10 A with 4 handle positions. Those. specification 230.0

OptiSwitch 4G10-97-U-R014

Open 2-pole cam switch for rated current 10 A with 4 handle positions. Those. specification 230.0

Automatic switch VA57-39-341830-630A-4000-690AC-NR400AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-340040-630A-3200-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

AK50KB-3M circuit breaker, 40,00 / 12, with free contacts, TU16-522.024-80
Automatic switch VA57-39-344750-500A-5000-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-39-344750-400A-4000-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch OptiMat A1000N-D-MR7-B-PD2-Z-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR7-B-PD2-Z-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

High-voltage disconnector RLK-IV-10/630-UHL1-KEAZ

High-voltage disconnector 3-pole with rated current 630.

High-voltage disconnector RLK-IV-10/400-UHL1-KEAZ

High-voltage disconnector 3-pole with rated current 400.

High-voltage disconnector RLK-1b-IV-10/630-UHL1-KEAZ

High-voltage disconnector 3-pole with rated current 630.

High-voltage disconnector RLK-1a-IV-10/630-UHL1-KEAZ

High-voltage disconnector 3-pole with rated current 630.

High-voltage disconnector RLK-2-IV-10/400-UHL1-KEAZ

High-voltage disconnector 3-pole with rated current 400.

High-voltage disconnector RLK-1b-IV-10/400-UHL1-KEAZ

High-voltage disconnector 3-pole with rated current 400.

OptiSwitch 4G16-67-U-S1-R114

Open 2-pole cam switch rated 16 A with 12 handle positions. Those. specification 230.0

High-voltage disconnector RLK-1a-IV-10/400-UHL1-KEAZ
OptiSwitch 4G16-662-U-R114

Open 2-pole cam switch rated 16 A with 12 handle positions. Those. specification 230.0

Condensate drain OptiBox G-DD-084
Housing ventilation device OptiBox G-DA-084
Pressure equalization device in the housing OptiBox G-DA-284
Section for cables OptiBox G-KKH-68
Section for cables OptiBox G-KKH-46
Front panel frame for sliding OptiMat A630-2000-UHL3
Frame of the front panel of stationary OptiMat A2500-4000-UHL3
Frame of the front panel of stationary OptiMat A630-2000A-UHL3
Inner door OptiBox G-DWH-68
OptiSwitch 4G40-77-U-S1-R212

Open 2 pole cam switch rated 40 A with 12 handle positions. Those. specification 400.0

OptiSwitch 4G40-56-U-S1-R212

Open 2 pole cam switch rated 40 A with 12 handle positions. Those. specification 400.0

Fuse DN000GB69V63L- (P330178C) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse DN000GB69V50L- (N330177C) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Automatic switch VA57-35-341310-63A-800-690AC-RMN127AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

OptiBox G-ZHT-68 plug set
OptiBox G-ZHT-46 plug set
Automatic switch VA53-41-344770-400A-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 400 A. Those. specification 400.0

Disconnector PE19-39-31190-630-IP-MP140-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 630 A, with removable handle, and mechanical durability is 10000 cycles.

Automatic switch VA57-39-330010-630A-1250-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-340010-630A-5000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-340010-500A-5000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-39-340010-400A-4000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-39-340010-320A-3200-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 320 A. Those. specification 400.0

Automatic switch VA57-39-340010-250A-2500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-340010-125A-1250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-35-340010-250A-2500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-340010-200A-2000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA57-35-340010-160A-1600-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-340010-80A-800-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-340010-80A-800-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-340010-100A-1000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-344610-160A-2000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-340010-80A-500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-340010-100A-500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-340010-250A-1250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-340010-80A-1250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-340010-160A-2000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-340010-160A-1000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-340010-100A-1250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-340010-50A-500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-340010-63A-1250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA57-35-340010-40A-630-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-35-340010-63A-800-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA57-35-340010-40A-400-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-35-340010-31.5A-320-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 31.5 A. Those. specification 400.0

Automatic switch VA57-35-340010-25A-250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 9 kA for a rated current of 25 A. Those. specification 400.0

Automatic switch VA57-31-340010-80A-1200-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-31-340010-63A-800-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA57-31-340010-50A-800-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-31-340010-40A-400-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-31-340010-40A-400-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-31-340010-31.5A-400-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 31.5 A. Those. specification 400.0

Automatic switch VA57-31-340010-25A-400-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 25 A. Those. specification 400.0

Automatic switch VA57-31-340010-100A-1200-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA55-43-334710-1600A-690AC-NR230AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 1600 A. Those. specification 400.0

Automatic switch VA55-43-340010-1600A-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 1600 A. Those. specification 400.0

Automatic switch VA55-43-334730-2000A-690AC-NR230AC / 220DC-PE230AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 63 kA for a rated current of 2000 A. Those. specification 400.0

Automatic switch VA55-43-334710-2000A-690AC-NR230AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 63 kA for a rated current of 2000 A. Those. specification 400.0

Automatic switch VA55-41-334730-1000A-690AC-NR230AC / 220DC-PE230AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 1000 A. Those. specification 400.0

Automatic switch VA55-43-334730-1600A-690AC-NR230AC / 220DC-PE230AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 1600 A. Those. specification 400.0

Automatic switch VA55-41-334710-1000A-690AC-NR230AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 1000 A. Those. specification 400.0

Automatic switch VA04-36-341810-63A-750-690AC-NR220..240AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 8 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA04-36-341810-250A-3000-690AC-NR220..240AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA04-36-340010-40A-500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at alternating current 8 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA04-36-341810-100A-750-690AC-NR220..240AC / 220DC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA04-36-340010-320A-3200-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 320 A. Those. specification 400.0

Automatic switch VA04-36-340010-200A-2500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA04-36-340010-125A-1500-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA04-36-340010-80A-1000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA04-36-340010-63A-750-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 8 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA04-36-340010-100A-1250-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA04-36-340010-160A-2000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA04-36-340010-160A-2000-690AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch OptiMat A1600N-D-MR7-B-PD2-Z-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

OptiSwitch 4G10-122-U-S1-R014

Open 2 pole cam switch rated 10 A with 12 handle positions. Those. specification 230.0

OptiSwitch 4G25-10-PK-S24-R112

Enclosed 3-pole cam switch for rated current 25 A with 2 handle positions. Those. specification 400.0

Fuse PC73UD13C400TF- (L300505A) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Automatic switch VA57-35-844650-250A-1250-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 250 A.

Automatic switch VA57-35-844650-250A-1250-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 250 A.

Automatic switch VA57-35-844650-160A-800-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 160 A.

Automatic switch VA51-39-334730-630A-5000-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-35-341850-250A-2500-690AC-NR110DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Optiswitch 4G10-19-U-R014

Open 1-pole cam switch for rated current 10 A with 2 handle positions. Those. specification 230.0

Automatic switch VA55-41-334730-400A-690AC-NR230AC / 220DC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-39-341850-250A-2500-690AC-NR110DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-39-340040-500A-5000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Packet cam switch PP53-16-1-058-5-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

AK50KB-2M switch, 20,00 / 5, IP54 (with glands), TU16-522.024-80
AK50KB-2M switch, 5.00 / 5, IP54 (with glands), TU16-522.024-80
Automatic switch VA53-41-341810-400A-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 400 A. Those. specification 400.0

Switch-disconnector VR32-35-A71251-250A-UHL3-KEAZ

Switch-disconnector 3-pole for rated current 250 A, in which a non-removable handle is installed.

Automatic switch VA51-39-331110-630A-5000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA04-36-330010-250A-750-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

AK50KB-1MG switch, 5.00 / 5, fastening behind the panel, TU16-522.024-80
AK50KB-2MG circuit breaker, 10,00 / 7, with free contacts, fastening behind the panel, TU16-522.024-80
Fuse A060URD0.500T13- (Q077639J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Transitional test box KIP-LS-IP20-KEAZ

Transient test box with a current frequency of 50 Hz for a rated current of 10 A with 3 phases of the supply network.

Transitional test box KIP-LS-IP20-KEAZ

Transient test box with a current frequency of 50 Hz for a rated current of 10 A with 3 phases of the supply network.

Transitional test box KIP-L-IP20-KEAZ

Transient test box with a current frequency of 50 Hz for a rated current of 10 A with 3 phases of the supply network.

Transitional test box KIP-S-IP20-KEAZ

Transient test box with a current frequency of 50 Hz for a rated current of 10 A with 3 phases of the supply network.

AK50KB-400-3M circuit breaker, 63,00 / 7, TU16-522.024-80
AK50KB-1MG circuit breaker, 63,00 / 5, TU16-522.024-80
Contactor KT-6023BS-160A-380AC-U3-KEAZ

Open contactor for 160 A rated current with 380 V alternating current control coil.

Contactor KT-6022BS-160A-380AC-U3-KEAZ

Open contactor for 160 A rated current with 380 V alternating current control coil.

Plastic housing for installing the OptiBox P-KNS-4-04-IP66 counter
Fuse PP57-37972-400A-UHL3-KEAZ

Fuse for rated current 400 A, in which the power loss is 120 W.

OptiSwitch 4G40-90-PK-R214

Closed 1-pole cam switch for rated current 40 A with 2 handle positions. Those. specification 400.0

Packet cam switch PP53-16-1-113-1-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Packet cam switch PP53-16-1-180-1-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Packet cam switch PP53-16-1-224-1-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Packet cam switch PP53-16-1-224-1-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Packet cam switch PP53-16-1-212-1-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Switch AK50B-400-3MOM2, 40A, 12Iн, IP54 (with glands), register, TU16-522.136-78

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 40 A.

Fuse PC70UD13C160TF- (R300487C) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Batch cam switch PP53-16-1-127-1-UHL2-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA51-35M2-341810-250A-1500-690AC-NR24AC / DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

Disconnector PE19-43-31150-1600A-L-MP120-UHL3-KEAZ

Switch-disconnector 3-pole, rated current 1600 A, with removable handle and mechanical durability of 6300 cycles.

OptiSwitch 4G10-90-U-S5

Open 1-pole cam switch for rated current 10 A with 2 handle positions. Those. specification 230.0

OptiSwitch 4G10-519-U-S1-R014

Open 2-pole cam switch for rated current 10 A with 3 handle positions. Those. specification 230.0

Switch AK50B-400-2MOM2, 4A, 6Iн, IP54 (with glands), condition - 01, TU16-522.136-78
OptiSwitch 4G10-590-U-R014

Open 8 pole cam switch rated 10 A with 3 handle positions. Those. specification 230.0

OptiSwitch 4G10-713-PK-R014

Enclosed 4-pole cam switch for rated current 10 A with 3 handle positions. Those. specification 230.0

AK50KB-2MG circuit breaker, 3,15 / 7, fastening behind the panel, TU16-522.024-80
Automatic switch VA57-39-344510-320A-1000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 320 A. Those. specification 400.0

Packet cam switch PP53-16-1-019-4-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Packet cam switch PP53-16-1-101-4-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA57-35-344710-160A-1600-690AC-NR400AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Load break switch VA51-35M2-301810-250A-690AC / 440DC-NR110AC / DC-UHL3-KEAZ

Block automatic 3-pole AC / DC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-644710-63A-800-440DC-NR24DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 63 A.

Automatic switch VA57-35-641810-16A-125-440DC-NR24DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 16 A.

Automatic switch VA57-35-641810-63A-800-440DC-NR24DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 63 A.

Fuse 45DB72V32PD- (Y209298A) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Contactor PML-2560DM-32A-24AC-UHL4-B-KEAZ

Contactor with a 24 V AC coil for a rated current of 32 A.

Automatic switch VA55-41-330010-400A-690AC-UHL3-KEAZ (Rear connection)

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA55-41-330010-250A-690AC-UHL3-KEAZ (Rear connection)

Block automatic 3-pole AC switch with a maximum switching capacity at AC 55 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA51-35M3-341810-320A-3200-690AC-NR380..400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 320 A. Those. specification 400.0

Automatic switch VA57-35-840010-50A-500-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 50 A.

Automatic switch VA57-35-840010-50A-500-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 50 A.

Automatic switch VA57-35-840010-40A-400-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 40 A.

Automatic switch VA57-35-840010-31.5A-160-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 31.5 A.

Automatic switch VA57-35-840010-25A-250-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 25 A.

Automatic switch VA57-35-840010-20A-100-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 20 A.

Automatic switch VA57-35-344710-200A-1600-690AC-NR127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA57-35-342310-200A-1600-690AC-RMN127AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA57-39-341810-320A-2000-690AC-NR110DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 320 A. Those. specification 400.0

Actuator PM12-010220-10A-220AC- (0,1-0,16A) -UHL3-V-KEAZ

Contactor with a 220 V alternating current control coil for a rated current of 10 A.

Actuator PM12-010220-10A-220AC- (0,1-0,16A) -UHL3-V-KEAZ

Contactor with a 220 V alternating current control coil for a rated current of 10 A.

Automatic switch VA57-35-344616-250A-2500-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-344650-250A-1000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Packet cam switch PP53-16-1-149-4-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Contactor PML-1566M-10A-24DC-UHL4-B-KEAZ

Contactor with a 24 V DC coil for a rated current of 10 A.

Automatic switch VA04-36-340010-400A-2500-440DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 400 A.

Automatic switch VA57-39-344750-630A-5000-690AC-NR230AC / 220DC-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

AK50KB-400-3M switch, 30,00 / 12, fastening behind the panel, TU16-522.024-80
AK50KB-2M switch, permanent, 20,00 / 5, fastening behind the panel, TU16-522.024-80
AK50KB-400-3M switch, 63,00 / 5, fastening behind the panel, TU16-522.024-80
Automatic switch VA57-35-341116-160A-1000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-342510-250A-2500-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-342510-125A-1250-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

AK50KB-3MG circuit breaker, 4.00 / 7, fastening behind the panel, TU16-522.024-80
AK50KB-3MG circuit breaker, 20,00 / 7, fastening behind the panel, TU16-522.024-80
AK50KB-2MG switch, 2.00 / 5, fastening behind the panel, TU16-522.024-80
Automatic switch VA57-35-841810-160A-2000-220DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 160 A.

Actuator PML-1210-10A-220AS- (2,4-4A) -UHL2-B-KEAZ

A starter with a 220 V AC coil for a rated current of 10 A.

Automatic switch AE2043M-320-8A-12In-400AC-NR110AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 8 A.

Packet cam switch PP53-16-1-119-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Batch cam switch PP53-25-1-124-1-UHL2-KEAZ

Cam switch for rated current 25 A with selector handle.

Contactor KT-6042B-400A-380AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Automatic switch VA57-35-344710-125A-500-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Contactor KTP-6053B-630A-220DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6052B-630A-220DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6052B-630A-110DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6043B-400A-220DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6043B-400A-110DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6053B-630A-110DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6042B-400A-220DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KTP-6042B-400A-110DC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KT-6053B-630A-380AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KT-6053B-630A-220AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KT-6052B-630A-380AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KT-6043B-400A-380AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KT-6043B-400A-220AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

Contactor KT-6042B-400A-220AC-I2-U3-KEAZ

Open contactor for rated current 630 A with 220 V DC control coil.

AK50KB-1MG circuit breaker, 0.60 / 7, TU16-522.024-80
Packet cam switch PP53-16-1-191-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA21-29T-121110-8A-1,5Iн-600DC-U3-KEAZ

Block automatic 1-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 8 A.

AK50KB-2M switch, 4,00 / 5, with free contacts, TU16-522.024-80
Automatic switch VA57-39-344730-400A-4000-690AC-NR230AC / 220DC-PE400AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

OptiSwitch 4G25-2501-U-R114

Open 5 pole cam switch rated 25 A with 3 handle positions. Those. specification 400.0

Automatic switch VA57-39-344730-400A-1250-690AC-NR400AC-PE400AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-39-344730-400A-4000-690AC-NR230AC / 220DC-PE230AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-39-340040-630A-5000-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Coil current KT6050-U3-KEAZ
Fuse PC84UD13C17CTQ- (N225987A) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Contactor PML-4500-63A-36AC-UHL4-B-KEAZ

Contactor with a 36 V AC coil for a rated current of 63 A.

Contactor PML-3500-40A-36AC-UHL4-B-KEAZ

Contactor with a 36 V AC coil for a rated current of 40 A.

Automatic switch VA53-41-340016-630A-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 85 kA for a rated current of 630 A. Those. specification 400.0

Mounting kit to the KMKS-KEAZ pole (set of 2 pcs.)

Hinged ShchU enclosures are designed for assembly of metering boards using modular equipment, for input and metering of electricity, as well as for protection of 220 / 380V networks from overload and short circuit currents.

Metal case ШУ-3 / 1-1-445х400х150-IP54-UHL2-KEAZ

Hinged ShchU enclosures are designed for assembly of metering boards using modular equipment, for input and metering of electricity, as well as for protection of 220 / 380V networks from overload and short circuit currents.

Metal case ShchU-3 / 1-0-395x310x150-IP54-UHL2-KEAZ

Hinged ShchU enclosures are designed for assembly of metering boards using modular equipment, for input and metering of electricity, as well as for protection of 220 / 380V networks from overload and short circuit currents.

Metal case ShchU-1 / 1-1-310x310x300x150 IP54-UHL2-KEAZ

Hinged ShchU enclosures are designed for assembly of metering boards using modular equipment, for input and metering of electricity, as well as for protection of 220 / 380V networks from overload and short circuit currents.

Metal case ШУ-1 / 1-0-310х300х150-IP54-UHL2-KEAZ

Hinged ShchU enclosures are designed for assembly of metering boards using modular equipment, for input and metering of electricity, as well as for protection of 220 / 380V networks from overload and short circuit currents.

Metal case SCHRv-72-550x610x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case SCHRv-54-550x450x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case SCHRv-48-630x320x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case SCHRv-36-550x320x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case SCHRv-24-405x320x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case SCHRv-18-275x450x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case SCHRv-12-275x320x120-IP31-UHL3-KEAZ

The built-in housing SCHRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short-circuit currents.

Metal case ShchRn-72-540x600x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-48-620x310x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-36-520x330x120-IP54-UHL2-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-24-395x310x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-18-265x440x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-12-265x310x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-48-620x330x120-IP54-UHL2-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-36-540x310x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-36-540x310x120-IP31-UHL3-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-24-395x330x120-IP54-UHL2-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-24-395x330x120-IP54-UHL2-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Metal case ShchRn-12-265x330x120-IP54-UHL2-KEAZ

Hinged housing ShchRn (v) is designed for the assembly of switchboards using modular equipment, for the input and distribution of electricity, as well as for the protection of 220/380 V networks from overload and short circuit currents.

Automatic switch VA57-35-344630-80A-800-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

OptiSwitch 4G25-76M-U-R114

Open 5 pole cam switch rated 25 A with 3 handle positions. Those. specification 400.0

Automatic switch VA51-35M2-341830-125A-1500-690AC-NR380..400AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-39-344730-400A-4000-690AC-NR400AC-PE230AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-35-344730-80A-800-690AC-NR230AC / 220DC-PE230AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-341810-250A-2500-690AC-NR400AC-UHL3-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA55-41-331810-1000A-690AC-NR400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 1000 A. Those. specification 400.0

Automatic switch VA55-41-341130-1000A-690AC-PE230AC-UHL3-KEAZ (Rear connection)

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 1000 A. Those. specification 400.0

Automatic switch VA57-35-641810-63A-800-440DC-NR110DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 63 A.

Automatic switch VA57-39-641810-400A-1600-440DC-NR110DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 400 A.

Automatic switch VA57-35-841110-63A-800-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 63 A.

OptiSwitch 4G10-70-U-S5-R014

Open 5-pole cam switch for rated current 10 A with 3 handle positions. Those. specification 230.0

OptiSwitch 4G10-70-U-S5-R014

Open 5-pole cam switch for rated current 10 A with 3 handle positions. Those. specification 230.0

Automatic switch VA57-39-344750-500A-5000-690AC-NR400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Actuator PML-1631-10A-220AC- (0,38-0,65A) -UHL2-B-KEAZ

A starter with a 220 V AC coil for a rated current of 10 A.

Actuator PML-1230-10A-380AC- (0,95-1,6A) -UHL2-B-KEAZ

A starter with a 380 V alternating current control coil for a rated current of 10 A.

Automatic switch VA57-35-834710-31.5A-320-220DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 31.5 A.

Automatic switch VA57-35-834710-250A-750-220DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 250 A.

Automatic switch VA57-35-834710-16A-200-220DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 16 A.

Automatic switch VA57-35-634710-16A-200-440DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 16 A.

Contactor PML-1110-10A-36AS-UHL2-B-KEAZ

Contactor with a 36 V AC coil for a rated current of 10 A.

Contactor PML-1110-10A-36AS-UHL2-B-KEAZ

Contactor with a 36 V AC coil for a rated current of 10 A.

Actuator PML-1621-10A-36AS- (7-10A) -UHL2-B-KEAZ

A starter with a 36 V AC coil for a rated current of 10 A.

Contactor PML-4510-63A-36AS-UHL2-B-KEAZ

Contactor with a 36 V AC coil for a rated current of 63 A.

Connecting profile PROFILE3SI6P- (G091868E) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Disconnect fuse MIS1C6P- (N091483J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Automatic switch VA51-35M3-341810-400A-2500-440DC-NR24AC / DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 400 A.

Automatic switch VA04-36-341810-400A-2500-440DC-NR24AC / DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 400 A.

Automatic switch VA57-39-344615-500A-1600-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA04-36-331130-250A-1250-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 250 A. Those. specification 400.0

AK50KB-3MG circuit breaker, 50,00 / 7, with free contacts, fastening behind the panel, TU16-522.024-80
AK50KB-3MG circuit breaker, 40,00 / 14, with free contacts, fastening behind the panel, TU16-522.024-80
AK50KB-2MG circuit breaker, 10,00 / 14, with free contacts, fastening behind the panel, TU16-522.024-80
AK50KB-2MG circuit breaker, 2.00 / 14, with free contacts, fastening behind the panel, TU16-522.024-80
AK50KB-2MG circuit breaker, 1.00 / 14, with free contacts, fastening behind the panel, TU16-522.024-80
Automatic switch AE2046M-320-16A-12In-400AC-NR48AC / DC-U3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 16 A.

PE operation kit for VA53, VA55-UHL3-KEAZ
Automatic switch VA57-35-331510-250A-2500-690AC-RNN127AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-331810-250A-2500-690AC-NR127AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-39-331510-630A-5000-690AC-RNN127AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-301810-630A-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 55 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA55-41-335210-1000A-690AC-NR230AC / 220DC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 1000 A. Those. specification 400.0

Contactor PML-1560DM-16A-24AC-UHL4-B-KEAZ

Contactor with a 24 V AC coil for a rated current of 16 A.

Actuator PML-1621-10A-220AS- (0,38-0,65A) -UHL2-B-KEAZ

A starter with a 220 V AC coil for a rated current of 10 A.

Fuse AG2- (R211730D) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse ATDR1 / 2- (Q223068J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse ATDR1 / 4- (W200855J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRM10- (V218817J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRS20RID- (P217777J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRM20- (F212686J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRS30RID- (K213196J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRS60RID- (M214716J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRS60RID- (M214716J) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse TRS100RID- (D214202E) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Packet cam switch PP53-16-1-396-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA57-35-345416-100A-1000-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-345416-50A-500-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-341810-40A-400-690AC-NR127AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA57-35-335416-250A-1000-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-335416-80A-500-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-39-335416-630A-4000-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-335416-630A-5000-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-640010-250A-1250-440DC-OM4-REG-KEAZ

Block automatic 3-pole DC circuit breaker with limit switching capacity at constant current kA for rated current 250 A.

Switch-disconnector VR32-31-A41240-100A-UHL3-KEAZ

Switch-disconnector 1-pole for rated current 100 A, in which a non-removable handle is installed.

Automatic switch VA57-35-340010-125A-1250-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-31-340010-80A-1200-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch VA57-35-341170-63A-1250-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA57-35-341170-160A-1000-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-341170-250A-1600-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-39-345416-500A-5000-690AC-RNN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-35-341170-250A-1000-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch VA57-35-341810-40A-630-690AC-NR110DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch OptiMat E250H200-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch OptiMat E100N032-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 32 A. Those. specification 400.0

Automatic switch VA57-35-841110-63A-800-690AC-UHL3-KEAZ

Block automatic 2-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch VA57-39-641810-500A-5000-440DC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 500 A.

Packet cam switch PP53-16-1-307-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Packet cam switch PP53-16-1-212-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Position locking device (disabled) OptiMat E-UHL3-REG
Shunt release OptiMat E-48AC / DC-UHL3-REG
Shunt release OptiMat E-400AC-UHL3-REG
Shunt release OptiMat E-24AC / DC-UHL3-REG
Shunt release OptiMat E-230AC-UHL3-REG
Shunt release OptiMat E-12AC / DC-UHL3-REG
Shunt release OptiMat E-110AC-UHL3-REG
Interpole partitions OptiMat E-UHL3-REG-2pcs
Terminal cover OptiMat E250-UHL3-REG-2pcs
Terminal cover OptiMat E100-UHL3-REG-2pcs
Combined alarm contact OptiMat E-UHL3-REG
Auxiliary alarm contact OptiMat E-UHL3-REG
Auxiliary contact right OptiMat E-UHL3-REG
Auxiliary contact left OptiMat E-UHL3-REG
Set of clamps OptiMat E250-UHL3-REG-3pcs
Set of clamps OptiMat E100-63..100A-UHL3-REG-3pcs
Set of clamps OptiMat E100-16..50A-UHL3-REG-3pcs
OptiMat E250-UHL3-REG DIN rail adapter
OptiMat E100-UHL3-REG DIN rail adapter
Automatic switch OptiMat E250N250-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch OptiMat E250N200-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch OptiMat E250N160-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch OptiMat E250N125-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 25 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch OptiMat E250L250-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at AC 18 kA for a rated current of 250 A. Those. specification 400.0

Automatic switch OptiMat E250L200-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at AC 18 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch OptiMat E250L160-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at AC 18 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch OptiMat E250L125-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at AC 18 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch OptiMat E100N100-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch OptiMat E100N080-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch OptiMat E100N063-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch OptiMat E100N050-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch OptiMat E100N040-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch OptiMat E100L100-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch OptiMat E100L080-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 80 A. Those. specification 400.0

Automatic switch OptiMat E100L063-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 63 A. Those. specification 400.0

Automatic switch OptiMat E100L050-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch OptiMat E100L050-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch OptiMat E100L040-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch OptiMat E100L032-UHL3-REG

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 32 A. Those. specification 400.0

Automatic switch OptiMat E100L025-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 8 kA for a rated current of 25 A. Those. specification 400.0

Automatic switch OptiMat E100L020-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 20 A. Those. specification 400.0

Automatic switch OptiMat E100L016-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch OptiMat E100L016-UHL3-REG

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch VA57-35-331510-250A-2500-690AC-RNN400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 250 A. Those. specification 400.0

OptiSwitch 4G16-92-U-S25-R112

Open 4 pole cam switch rated 16 A with 3 handle positions. Those. specification 230.0

OptiBox G-FH-68 foundation
OptiBox G-FH-46 foundation
OptiBox G-FH-46 foundation
Automatic switch VA57-39-301130-630A-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA04-36-331810-400A-4000-690AC-NR380..400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 20 kA for a rated current of 400 A. Those. specification 400.0

Actuator PML-1210-10A-380AS- (2,4-4A) -UHL2-B-KEAZ

A starter with a 380 V alternating current control coil for a rated current of 10 A.

Automatic modular switch OptiDin BM63-2NZ25-H1-UHL3 (VM63)

Modular automatic 2-pole AC switch with a maximum switching capacity at AC 6 kA for a rated current of 25 A.

Automatic switch OptiMat A4000N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2000N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A2500N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A1600N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR8-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR8-B-PD2-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A4000N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1250N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR7-B-PD2-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A1600N-D-MR7-B-PD2-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A630N-D-MR7-B-PD2-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Packet cam switch PP53-16-1-255-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Autoamtic switch VA57-39-342310-630A-2500-690AC-RMN230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Automatic switch VA57-39-341130-500A-2000-690AC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 500 A. Those. specification 400.0

Automatic switch VA57-39-341210-630A-1250-690AC-NR230AC / 220DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 630 A. Those. specification 400.0

Steel mounting panel OptiBox G-PMSH-530x736x2
Steel mounting panel OptiBox G-PMSH-356x542x1,5
Mounting panel OptiBox G-PMPH-356x542x4
Mounting panel OptiBox G-PMPH-530x736x4
Polyester housing OptiBox G-731-SF111-A-1-IP66

Standard light gray IP66 glass fiber reinforced polyester housing.

Polyester housing OptiBox G-706-SF111-A-1-IP66

Standard light gray IP66 glass fiber reinforced polyester housing.

Polyester housing OptiBox G-706-SF111-A-1-IP66

Standard light gray IP66 glass fiber reinforced polyester housing.

Packet cam switch PP53-16-1-190-1-UHL3-KEAZ

Cam switch for rated current 16 A with selector handle.

Automatic switch VA57-35-340010-100A-1250-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-340010-100A-1250-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-340010-200A-1600-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA57-35-340010-125A-1600-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 125 A. Those. specification 400.0

Automatic switch VA57-39-340010-400A-1600-690AC-OM4-REG-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 400 A. Those. specification 400.0

Fuse PC73UD90V10CD1A- (L300574A) -KEAZ-FERRAZ

Fuse with 10 kA maximum AC switching capacity.

Fuse DC10GC11C12- (C093658J) -KEAZ-FERRAZ

Fuse with limiting switching capacity of alternating current 500 kA.

Fuse NH2GG50V50- (B211601C) -KEAZ-FERRAZ

Fuse with limiting switching capacity of alternating current 500 kA.

Fuse NH2GG50V80- (C213649C) -KEAZ-FERRAZ

Fuse with a maximum AC switching capacity of 80 kA.

Fuse NH2GG50V160- (Y216704C) -KEAZ-FERRAZ

Fuse with a maximum switching capacity of 160 kA alternating current.

Fuse NH2GG50V500- (T228522C) -KEAZ-FERRAZ

Fuse with limiting switching capacity of alternating current 500 kA.

Fuse PC94UD15C21CP1- (T101967A) -KEAZ-FERRAZ

Fuse with 60 kA maximum AC switching capacity.

Switch-disconnector VR32-35-A70121-250A-L-UHL3-KEAZ

Switch-disconnector 3-pole for rated current 250 A, in which a non-removable handle is installed.

Switch-disconnector VR32-39-A70121-630A-L-UHL3-KEAZ

3-pole switch-disconnector for rated current 630 A, in which a non-removable handle is installed.

Automatic switch VA57-35-341810-40A-160-690AC-NR24DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 10 kA for a rated current of 40 A. Those. specification 400.0

Automatic switch VA55-41-344730-400A-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ (Rear connection)

Block automatic 3-pole AC switch with a limiting switching capacity at AC 55 kA for a rated current of 400 A. Those. specification 400.0

Automatic switch VA57-35-844610-125A-1250-220DC-UHL3-KEAZ

Block automatic 2-pole DC switch with a limiting switching capacity at constant current kA for a rated current of 125 A.

Automatic switch OptiMat A3200N-D-MR7-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2000N-D-MR7-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR7-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR7-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR7-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A4000N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 4000 A.

Automatic switch OptiMat A3200N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 3200 A.

Automatic switch OptiMat A2500N-D-MR7-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 85 kA for a rated current of 2500 A.

Automatic switch OptiMat A2000N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 2000 A.

Automatic switch OptiMat A1600N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1600 A.

Automatic switch OptiMat A1250N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1250 A.

Automatic switch OptiMat A1000N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

3-pole AC air circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 1000 A.

Automatic switch OptiMat A800N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 800 A.

Automatic switch OptiMat A630N-D-MR8-B-PD2-MR-Z-ISH-PK-U3

Air automatic 3-pole AC circuit breaker with a maximum switching capacity at AC 65 kA for a rated current of 630 A.

Switch automatic modular OptiDin BM63-1C2-ОМ4-REG

Modular automatic 1-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 2 A.

Mechanical interlock kit for 2 OptiMat A630-4000-UHL3
Actuator PML-1230-10A-380AC- (5,5-8A) -UHL2-B-KEAZ

A starter with a 380 V alternating current control coil for a rated current of 10 A.

Automatic switch VA57-35-341130-50A-500-690AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-341130-50A-160-690AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-341130-200A-500-690AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 40 kA for a rated current of 200 A. Those. specification 400.0

Automatic switch VA57-35-341130-100A-1000-690AC-PE400AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 30 kA for a rated current of 100 A. Those. specification 400.0

Automatic switch VA57-35-341110-20A-80-690AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 20 A. Those. specification 400.0

Automatic switch VA57-35-345210-160A-1600-690AC-RMN24AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 35 kA for a rated current of 160 A. Those. specification 400.0

Automatic switch VA57-35-344730-50A-160-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-344730-50A-160-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 15 kA for a rated current of 50 A. Those. specification 400.0

Automatic switch VA57-35-344730-25A-100-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 9 kA for a rated current of 25 A. Those. specification 400.0

Automatic switch VA57-35-344730-20A-80-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at alternating current 6 kA for a rated current of 20 A. Those. specification 400.0

Automatic switch VA57-35-344730-16A-80-690AC-NR230AC / 220DC-PE230AC-UHL3-KEAZ

Block automatic 3-pole AC switch with a maximum switching capacity at AC 3.5 kA for a rated current of 16 A. Those. specification 400.0

Automatic switch VA04-36-341810-160A-2000-690AC-NR24AC / DC-UHL3-KEAZ

Block automatic 3-pole AC switch with a limiting switching capacity at AC 20 kA for a rated current of 160 A. Those. specification 400.0