Electrical equipment

36,308 products in DB
ImageNameSummaryCategories
Additional contact with opening before the main contacts OptiSwitch D-4 (2NO + 2NC)
Charging and rectifying devices of the VAZP-MT series

The VAZP-M series charging and recharging rectifier unit is designed: 1) for charging serviced and low-maintenance lead-acid storage batteries and sealed lead-acid storage batteries with gas recombination; 2) for keeping AB in trickle charge mode; 3) parallel operation with battery for the load; 4) to power the load when the battery is disconnected; 5) for installation in DC switchboards. The VAZP-M series charging and recharging rectifier unit is intended: 1) for charging serviced and low-maintenance lead-acid batteries and sealed lead-acid storage batteries with gas recombination; 2) for keeping the battery in constant trickle charge mode; 3) parallel operation with the battery for the load; 4) for powering the load when the battery is disconnected; 5) for installation in DC switchboards. "Operating according to the IU-characteristic, provides power to consumers and at the same time charges the battery. power supply of consumers for a specified time, after the recovery of the voltage in the supply network, the rectifier unit switches to the battery charging mode while simultaneously feeding the consumers. Advantages: • Automatic two-level charge for all types of batteries; • Manual equalizing charge for battery maintenance; • Output voltage adapted to battery, output voltage stabilization is not worse than ± 0.5% • Battery capacity test Tech. specifications Main performance characteristics: Input voltage (V) 220/380 Input voltage deviation (%) ± 15 Frequency (Hz) 47-63 Output voltage (V) 110, 220 Maximum output current (A) 400 or more Voltage regulation (%) ± 0.5 50-100% load (%) 93 Operating temperature (о C) from 0 to 40 Model range "VAZP-M" No. Type Maximum output current, A Rated output voltage, V Overall dimensions, no more than, mm No. Type Maximum output current, A Rated output voltage, V Overall dimensions, no more, mm Weight, no more than, kg 1VAZP-MT 25.1102VAZP-MT 40.1103VAZP-MT 60.1104VAZP-MT 80.1105VAZP-MT 100.1106VAZP-MT 150.1107VAZP-MT 200.1108.2VAZP-MT20.2 MT 60.22011 VAZP-MT 80.22012 VAZP-MT 100.22013 VAZP-MT 150.22014 VAZP-MT 200.22015 VAZP-MT 300.22016 VAZP-MT 400.220172 x VAZP-MT 25.220 182 x VAZP-MT 40.220192 x 60.220P-MT.2

SNTs146

These connectors with local protection of contacts designed for use in DC, AC(frequency up to 3MHz) at voltage to 700V(as peak).Plugs(sockets) equipment and cable mounted are manufactured in shielded(SNTs 146Э) and unshielded version(SNTs 146).Equipment mounted connectors can be manufactured with the contacts for printed circuit board.Equipment and cable mounted parts of the connector is manufactured w/o backshell,with straight (closed,opened) and angled backshell.Body parts are manufactured from stainless steel with current conductive coating .Threaded connection with self locking device with visual indication of coupling ending. Contact plating: goldThe contcts are removables assigned for crimping for three dimensional(point-to-point) wiring and for solding mount for printed-circuit wiring, in hermetic plug the contacts assigned for solding.Plugs,sockets of SNTs 146 and SNTs 146G type are mated with the connectors of 983Series under MIL-C-83723 and SNTs 147 manufactured in compliance with TsSNK 430421.011TU.These connectors w/o backshell or with backshell(metallic or plastic) with conductive or nonconductive coating.These connectors are intended for internal wiring and are modified for operation in all climatic areas in compliance with Technical Specifications NKTsS.434410.505TU. Тех. спецификации Technical specificationsTotal number of contacts: 12, 14, 31, 41, 61Operational current per contact from, A: 1, 5Operational current per contact to, A: 2, 5Peak operating voltage,V: 700Plug(male) or socket(female): Plug(male) ,socket(female)Equipment(fixed) or cable mounted(free): Equipment mounted, cable mountedСonnector rear design: W/o junction pipeHermetic or nonhermetic: HermeticShielded or unshielded: ShieldedType of mating: Thereaded connectionNumber of mating: 1000Operating ambient temperature from, °C: -60Operating ambient temperature to, °C: 155Method of wiring: Three-dimensional(point-to-point), solder mount, by crimping(the contacts)Wiring: InternalHermetic, air leakage allowed or not allowed: Not allowed

SNTs146

These connectors with local protection of contacts designed for use in DC, AC(frequency up to 3MHz) at voltage to 700V(as peak).Plugs(sockets) equipment and cable mounted are manufactured in shielded(SNTs 146Э) and unshielded version(SNTs 146).Equipment mounted connectors can be manufactured with the contacts for printed circuit board.Equipment and cable mounted parts of the connector is manufactured w/o backshell,with straight (closed,opened) and angled backshell.Body parts are manufactured from stainless steel with current conductive coating .Threaded connection with self locking device with visual indication of coupling ending. Contact plating: goldThe contcts are removables assigned for crimping for three dimensional(point-to-point) wiring and for solding mount for printed-circuit wiring, in hermetic plug the contacts assigned for solding.Plugs,sockets of SNTs 146 and SNTs 146G type are mated with the connectors of 983Series under MIL-C-83723 and SNTs 147 manufactured in compliance with TsSNK 430421.011TU.These connectors w/o backshell or with backshell(metallic or plastic) with conductive or nonconductive coating.These connectors are intended for internal wiring and are modified for operation in all climatic areas in compliance with Technical Specifications NKTsS.434410.505TU. Тех. спецификации Technical specificationsTotal number of contacts: 12, 14, 31, 41, 61Operational current per contact from, A: 1, 5Operational current per contact to, A: 2, 5Peak operating voltage,V: 700Plug(male) or socket(female): Plug(male) ,socket(female)Equipment(fixed) or cable mounted(free): Equipment mounted, cable mountedСonnector rear design: W/o junction pipeHermetic or nonhermetic: HermeticShielded or unshielded: ShieldedType of mating: Thereaded connectionNumber of mating: 1000Operating ambient temperature from, °C: -60Operating ambient temperature to, °C: 155Method of wiring: Three-dimensional(point-to-point), solder mount, by crimping(the contacts)Wiring: InternalHermetic, air leakage allowed or not allowed: Not allowed

Thyristor T283-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

IGBT MIFA-xx17FA-150N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 150Tjmax [° C]: 175Uisol [B]: 4000Casing: MIFADimensions (width / length) [mm]: 34 / 94http: //www.proton-electrotex.com/ru/ product_in / 1611

IGBT MIFA-xx17FA-100N

The modules are designed for switching high-power loads and for use as part of converters and drives for low and medium power electric motors. Main applications: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · Low total dynamic losses · Low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg up to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 100Tjmax [° C]: 175Uisol [B]: 4000Casing: MIFADimensions (width / length) [mm]: 34/94

IGBT MIFA-xx17FA-075N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 75Tjmax [° C]: 175Uisol [B]: 4000Casing: MIFADimensions (width / length) [mm]: 34/94

IGBT MIFA-xx12FA-200N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1200ICnom [A]: 200Tjmax [° C]: 175Uisol [B]: 4000Case: MIFADimensions (width / length) [mm]: 34 / 94http: //www.proton-electrotex.com/ru/ product_in / 1605

IGBT MIFA-xx12FA-150N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 150 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIFA Dimensions (width / length) [mm]: 34/94

IGBT MIFA-xx12FA-100N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 100 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIFA Dimensions (width / length) [mm]: 34/94

IGBT MIDA-HB17FA-450N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [B]: 1700ICnom [A]: 450Tjmax [° C]: 175Uisol [B]: 4000Case: MIDADimensions (width / length) [mm]: 62/152

IGBT MIDA-HB17FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 300Tjmax [° C]: 175Uisol [V]: 4000Casing: MIDADimensions (width / length) [mm]: 62/152

IGBT MIDA-HB12FA-600N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 600 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIDA Dimensions (width / length) [mm]: 62/152

IGBT MIDA-HB12FA-450N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1200 ICnom [A]: 450 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIDA Dimensions (width / length) [mm]: 62/152

IGBT MIDA-HB12FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200 ICnom [A]: 200 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIAA Dimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx17FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 300Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx17FA-200N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 200Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx17FA-150N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · Voltage inverters for solar panels · Air conditioning systems · High-power converters and UPS · Wind turbine inverters Features: · Increased operating temperature Tjop = 150 ° C · low total dynamic losses · low saturation voltage values · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C Tech. specifications UCES [V]: 1700ICnom [A]: 150Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx12FA-400N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200ICnom [A]: 400Tjmax [° C]: 175Uisol [V]: 4000Casing: MIAADimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx12FA-300N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4 kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200 ICnom [A]: 300 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIAA Dimensions (width / length) [mm]: 61.4 / 106.4

IGBT MIAA-xx12FA-200N

The modules are designed for switching high-power loads and are used as part of converters and drives of electric motors of small and medium power. Main areas of application: · AC motor drives · voltage inverters for solar panels · air conditioning systems · high-power converters and UPS · wind turbine inverters operating temperature Tjop = 150 ° C. · low total dynamic losses · low saturation voltage · effective switching frequency up to 10 kHz · insulation breakdown voltage 4kV · storage temperature Tstg down to -55 ° C. Those. specifications UCES [V]: 1200 ICnom [A]: 200 Tjmax [° C]: 175 Uisol [V]: 4000 Housing: MIAA Dimensions (width / length) [mm]: 61.4 / 106.4

Diode D133-630

Rectifier diodes are one of the most common types of power switches. Designed for use in DC and AC circuits with a frequency of up to 500 Hz in general-purpose electrical devices. The anode and cathode are flat bases and polarity is indicated using the polarity symbol printed on the diode body. The devices have a sealed housing that isolates the functional part of the semiconductor element from the external environment. Applications: rectifier bridges, traction converters, electric drives, inverters. Those. specifications URRM [V min] [V min]: 2000URRM [V max] [V max]: 2800IFAV [A]: 630Tc: 133UFM (Tc = 25 ° C) [V]: 1.60IFM (Tc = 25 ° C) [ A]: 1978U (TO) / Tjmax [V]: 1.10rT / Tjmax [mOhm]: 0.350 Tjmax [° C]: 175Rthjc [° C / W]: 0.0400 Body: D.B2 Version: tablet type Type: rectifier

Diode D056-9500

Welding diodes (boxed and unpackaged) are mainly used in resistance welding machines where high currents are required. A feature of the operation of diodes in welding machines is short-term cycles of passing current pulses, leading to the heating of the semiconductor structure, and then its further cooling, associated with restrictions on the time of continuous operation of welding machines ("heating – cooling" mode). Those. specifications URRM [V min] [V min]: 200URRM [V max] [V max]: 400IFAV [A]: 11814Tc: 85UFM (Tc = 25 ° C) [V]: 1.08IFM (Tc = 25 ° C) [A]: 6300U (TO) / Tjmax [V]: 0.74rT / Tjmax [mΩ]: 0.030 Tjmax [° C]: 180Rthjc [° C / W]: 0.0050 Body: ——– —- Execution: tablet Type: welding

D053-7100

Welding diodes (boxed and unpackaged) are mainly used in resistance welding machines where high currents are required. A feature of the operation of diodes in welding machines is short-term cycles of passing current pulses, leading to the heating of the semiconductor structure, and then its further cooling, associated with restrictions on the time of continuous operation of welding machines ("heating – cooling" mode). Those. specifications URRM [V min] [V min]: 200URRM [V max] [V max]: 400IFAV [A]: 7402Tc: 85UFM (Tc = 25 ° C) [V]: 1.05IFM (Tc = 25 ° C) [A]: 5000U (TO) / Tjmax [V]: 0.750rT / Tjmax [mOhm]: 0.029 Tjmax [° C]: 170Rthjc [° C / W]: 0.0090 Body: D.Q1 Version: tablet Type: welding

Thyristor TBCH343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH153-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH153-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH143-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH143-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBCH133-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI933-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI873-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI833-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI773-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI673-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI 643-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI643-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI643-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI573-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI543-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. VDRM / VRRM specifications [V min]: 100; VDRM / VRRM [V max]: 800; ITAV [A]: 2000; Tc: 93; VTM (Tc = 25 ° C) [V]: 1.50; ITM (Tc = 25 ° C) [A]: 6280; VT (TO) / Tjmax [V]: 0.840; rT / Tjmax [mΩ]: 0.090; tq [μs]: 160; Tjmax [° C]: 140; Rthjc [° C / W] 0.0180;

Thyristor TBI533-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI473-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI443-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI443-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI443-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI373-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI373-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI371-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI371-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI353-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI353-700

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI343-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI343-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI333-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI333-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI271-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI261-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI261-125

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI261-125

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor TBI253-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI253-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI253-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI243-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI243-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI243-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI233-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI233-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI175-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI173-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI 153-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI153-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI143-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI 143-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI 143-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI133-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor TBI123-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800;

Thyristor T933-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T933-160

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T653-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T553-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T471-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T471-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-630

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T453-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T443-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T443-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T433-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-5000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-4000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-3600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T393-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-2500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-2000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T373-1250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T371-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T371-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T371-200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T353-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T353-1600

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T353-1000

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T343-800

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T343-500

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T343-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T333-400

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T333-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T275-320

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T275-250

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;

Thyristor T273-3200

Designed for use in DC and AC circuits with industrial and increased frequency up to 3000Hz. They are mainly used at industrial frequency in the following converter devices: controlled and semi-controlled rectifiers at traction substations, AC controllers, soft starters, powerful electric drives for synchronous electric motors, converters for electric arc furnaces, reactive power compensators. electrotex.com/catalog/tiristori Tech. specifications UDRM / URRM [V min]: 3000; UDRM / URRM [V max] [V max]: 3600; ITAV [A]: 160; Tc: 97; UTM (Tc = 25 ° C) [B]: 2.30; ITM (Tc = 25 ° C) [A]: 503; UT (TO) / Tjmax [B]: 0.95; rT / Tjmax [mΩ]: 3.000; tq [μs]: 400; Tjmax [° C]: 125; Rthjc [° C / W]: 0.0800; Body: T.A1; Execution: tablet; Type: low frequency;