Aviation

Main characteristics of the KOMPLEKTATsIYa1Udlinitel L = 125427 / 522Nasadok732 / 10 142Udlinitel L = 76427 / 3QR23Nasadok732 / 10 173Udlinitel L = 38427 / 1,524Nasadok732 / 40 274Udlinitel L = 100405 / 425Nasadok732 / 40 325Nasadok46 1726Nasadok732 / 80 466Nasadok46 1927Perehodnik4317Nasadok46 2228Nasadok540 228Nasadok45 1729Treschotka 3 / 8435QR9Nasadok45 1930Momentalnaya Screwdriver 20-120 Ncm .9132.04416 Nozzle 40 837 Nozzle 732/40 1917 Nozzle 731/10 938 Nozzle 732/40 3218 Nozzle 731/10 12 39 Nozzle 731/10 1719 Nozzle 731/10 1440 Nozzle 731/10 1120 Nozzle 731/10 194121 Nozzle 731/10 1142

Main characteristics of the KOMPLEKTATsIYa1Kist CF 6019Udlinitel L = 160427 / 6QR2Nasadok456 1120Udlinitel427 / 183Nasadok4561421Poperechnaya rukoyatka425QR4Nasadok456 1722Zerkalo12921N-405Nasadok456 1923Klyuch 20-100 N m730N / 106Nasadok50 2224Klyuch 2-20 N m730N / 27Nasadok50 2425Molotok109608Perehodnik 9×12 – 14h187370 / 1026Konnektorny klyuch657652309Perehodnik43227Ploskogubtsy6501516010Klyuch 5,5h7MOTOR 10 5,5x728Otverka0,8x4x10011Klyuch 8h9MOTOR 10 8x929OtverkaPH2x10012Klyuch 10h11MOTOR 10 10x1130Nozh1232013Klyuch 12h14MOTOR 12x1431Treschotka 10 3/8 "735 / 514Klyuch 14h17MOTOR 14x1732Nasadok731 10/40 2215Klyuch 19h22MOTOR 33Nasadok731 19×22 10/10 10 716Klyuch 32h36MOTOR 32x3634Napilnik8AT.9105.010.00917Nasadok540 1935Napilnik8AT.9105.010.01318Treschotka435QR36Vykolodka bronzovaya8AT.9112.012

Main technical characteristics COMPLETE SET 1 Nozzle 456 102 Nozzle 46 103 Nozzle 50 274 Nozzle 55 365 Extension 427 / 3QR6 Extension L = 200559 87 Ratchet 3/8735/58 Wrench 730N / 29 Cross handle 425QR10 Nozzle 540 1411 Wrench 7×8 MOTOR 10

Main technical characteristics COMPLETE SET 1 ICH indicator 02 cl. 0 GOST5577-68 2 Stripper for rings 654560023 Nozzle 59 224 Head 5565 Cross handle 5586 Extension 405QR / 67 Nozzle 540 108 Ratchet 415 QR9 Nozzle 40 1010 Nozzle 40 811 Wrench 2-20730 / 212 Ratchet screw 725 / 4QR13 Tool holder R40 nozzles for tightening the bolts of the clamping exhaust pipe of the engine Ch8AT.9100.01019 Stand for the indicator 6015.0044.00020 pliers for installing emergency door release handle 6464.002021 Holder for flushing filter elements 8AT.9102.01222 ruler for measuring the lengths of the vertical rods of the swashplate head S = 19 for spark plug KO-508AT.9102.31229 Ring for crimping the diaphragm bulb of the hydroaccumulator for rope with a diameter of 1.6 to 300N (30 kgf) IN-11

Main technical characteristics COMPLETE SET 1 ICH indicator 02 cl. 0 GOST5577-68 2 Stripper for rings 654560023 Nozzle 59 224 Head 5565 Cross handle 5586 Extension 405QR / 67 Nozzle 540 108 Ratchet 415 QR9 Nozzle 40 1010 Nozzle 40 811 Wrench 2-20730 / 212 Ratchet screw 725 / 4QR13 Tool holder R40 nozzles for tightening the bolts of the clamping exhaust pipe of the engine Ch8AT.9100.01019 Stand for the indicator 6015.0044.00020 pliers for installing emergency door release handle 6464.002021 Holder for flushing filter elements 8AT.9102.01222 ruler for measuring the lengths of the vertical rods of the swashplate head S = 19 for spark plug KO-508AT.9102.31229 Ring for crimping the diaphragm bulb of the hydroaccumulator for rope with a diameter of 1.6 to 300N (30 kgf) IN-11

Main technical characteristics COMPLETE SET 1 Tool holder 18212 Ratchet 725 / 4QR3 Wrench 2-20 N m730N / 24 Wrench 20-100 N m730N / 105 Wrench 80-400 N m730N / 406 Ratchet 3 / 8735/57 Ratchet 735/108 Ratchet adapter 735/209

The main characteristics of those KOMPLEKTATsIYa1Lupa LP.-1-7 * GOST25706-8321Treschotka725 / 4QR2Ploskogubtsy6501516022Klyuch 2-20 Nm730N / 23Otverka1,2h6,5h15023Poperechnaya rukoyatka4254Otverka1,6h10,0h17524Kogtevoy zahvat12922N5OtverkaRN 2h10025Prisposoblenie for kontrovki657512206OtverkaRN 3h15026Perehodnik4327Nozh1232027LampaCh8MT.9100.14008Klyuch 7h8MOTOR 10 7x828Molotochek6420 / 01209Klyuch 8h9MOTOR 10 8x929Molotok dyuralevyy6420 / 013010Klyuch 10h11MOTOR 10 10x1130Spets pliers ustanovkiruchki emergency release dverey6464 / 002011Klyuch 10h12MOTOR 10 10x1231Otverka for locks kapota8AT.9100.03012Klyuch 12h14MOTOR 10 12x1432KlyuchCh8MT.9100.10213Klyuch 17h19MOTOR 10 17x1933Nasadok S = 24Ch8MT.9100.15314Klyuch 19h22MOTOR 10 19x2234Klyuch combined S-55×60 Ch8AT.9101.05115Klyuch 22h24MOTOR 10 22x2416Klyuch 32h36MOTOR 10 32×3617 Key 41×46 MOTOR 10 41×46 18 Nozzle 46 1419 Extension 427/1820 Nozzle 540 10

The main characteristics of the 10 KOMPLEKTATsIYa1Klyuch 5,5h7MOTOR 5,5x72Klyuch 6h7MOTOR 10 6x73Klyuch 8h9MOTOR 10 8x94Klyuch 10h11MOTOR 10 10x115Klyuch 10h12MOTOR 10 10x126Klyuch 14h17MOTOR 10 14x177Klyuch 19h22MOTOR 10 19x228Otverka0,8×4,0x1009Ploskogubtsy6501516010Konnektorny klyuch6576523011Nozhnitsy1313512Nozh1232013Pintset L = 1601313014Otverka chasovaya8AT.9107.03015Otverka latunnaya8AT.9108.02016Spetsialnaya otverka dlyaregulirovki 8AT potentiometers. 9108.05017 Key for opening the clamping nut 56.9501.11218 Special key for plug connectors 8АТ.9106.02319 Rubber suction cup 8АТ.9108.025

The main characteristics of those KOMPLEKTATsIYa1Zerkalo12921N-402Nasadok40 73Rukoyatka400QR4Klyuch 5,5h7MOTOR 10 5,5x75Klyuch 6h7MOTOR 10 6x76Klyuch 8h9MOTOR 10 8x97Klyuch 10h11MOTOR 10 10x118Klyuch 10h12MOTOR 10 10x129Klyuch 19h22MOTOR 10 19x2210Otverka0,8×4,0x10011Ploskogubtsy6501516012Ploskogubtsy6509514013Kruglogubtsy6524516014Konnektorny klyuch6576523015Ostrogubtsy6602514016Nozh1232017Lineyka1311018Pintset1313019Otverka chasovaya8AT.9107.03020Otverka latunnaya8AT.9108.02021PayalnikCh8AT.9106.14022Podstavka under poyalnik8AT.9106.03023 " L "-shaped tip for a soldering iron Ch8AT.9106.140 Ch8AT.9106.141

Main characteristics of the L-KOMPLEKTATsIYa1Plosogubtsy650951402Nasadok40 143Rukoyatka400QR4Nozh123205Kleschi663462206Ploskogubtsy650151607Ostrogubtsy660251408Pintset 160131309Nasadok40 5,510Nasadok40 811Treschotka415QR12Kleschi6623516013KistKFK-114Klyuch 5,5h7MOTOR 10 5,5x715Klyuch 6h7MOTOR 10 6x716Klyuch 7h8MOTOR 10 7x817Klyuch 10h11MOTOR 10 10x1118Klyuch 10h12MOTOR 10 10x1219Klyuch 14h17MOTOR 10 14x1720Klyuch 19h22MOTOR 10 19x2221Otverka for ShRCh8AT.9106.00222PayalnikCh8AT.9106.14023Napilnik8AT.9105.010.01324Napilnik8AT .9105.010.01525 Screwdriver0.8х4.0х100 (4620 2) 26 Screwdriver1.2х6.5х150 (4620 2) 27 Extension L = 150405QR / 628 Connector wrench 6576523029 "L" -shaped tip for soldering iron Ch8AT.9106.181340 .9106.03032 Sanding paper N 68AT.9106.022

Main characteristics of the KOMPLEKTATsIYa1Kardan510QR2Nasadok51 223Nasadok440 364Nasadok440 415Udlinitel L = 75509 / 3QR6Udlinitel L = 255509 / 10QR7Poperechnaya rukoyatka506QR8Klyuch 24h27MOTOR 10 24x279Klyuch 27h30MOTOR 10 27x3010Ploskogubtsy6501520011Zubilo102 / 12512Kerner105 / 100x1013Molotok1096014Chertilka1232115Maslenka1225116Lineyka1311017Proboynik104 / 120x318Nozhnitsy metallu12752L19Nasadok for S = R = Radius 24Ch8AT.9105.00520Kerner 1,5Ch8AT.9105.01521Napilnik with ruchkoy8AT. 9105.010.00322 File with handle 8AT.9105.010.00523 File with handle 8AT.9105.010.00724 File with handle 8AT.9105.010.00925 File with handle 8AT.9105.010.01126 Case with drills 8AT.9105.010.00523 Case with drills 8AT.505.010.00523 Case with drills 8AT.9105.010.00523 File with handle 8AT.9105.010.00724 File with handle 8AT.9105.010.00925 File with handle 8AT.9105.010.01126 Case with drills 8AT.9105.010.00523 Case with drills 8AT.505.010.00523 Case with drills 8AT.9105.010.00523 Case with drills 8AT.9105.010.00523 File with handle 8AT.9105.010.00724 File with handle 8AT.9105.010.00925 File with handle 8AT.9105.010.01126

The main characteristics of the 10 19×22 KOMPLEKTATsIYa1Nutromer8AT.9101.45028Klyuch 19h22MOTOR 2Nasadok40 929Klyuch 22h24MOTOR 10 22x243Nasadok40 1030Klyuch 32h36MOTOR 10 32x364Nasadok40 1131Klyuch 41h46MOTOR 10 41x465Nasadok40 1232Klyuch 10OPEN BOX 14 106Nasadok40 1433Klyuch 12OPEN BOX 14 127Nasadok52 1734Klyuch 14OPEN BOX 14 148Nasadok52 1935Klyuch 17OPEN BOX 14 179Nasadok52 2236Klyuch cap 20 13h17STABIL 13x1710Nasadok52 2437Klyuch cap 14h15STABIL 20 14x1511Nasadok52 2738Klyuch 17h19STABIL cap 20 17x1912Nasadok440 4639Klyuch 10h11STABIL 10x1113Nasadok440 5040Klyuch 17h19STABIL 17x1914Kardan407QR41Otverka1,2×6,5×150 (5 4720) 15Udlinitel L = 255509 / 10QR42Otverka0,6×3,5×75 (4720 1) 16Kardan510QR43Kruglogubtsy6524516017Treschotka512QR44Molotok2-2718Rukoyatka400QR45Schup11095 / 2019Udlinitel L = 150405 / 6QR46Zerkalo12921N-5 4020Klyuch , 5х7MOTOR 10 5,5×747 Awl 1075721 Key 6х7 MOTOR 10 6×748 Punch 8АТ.9101.08022 Key 8х10 MOTOR 10 8×1049 Brush КР – 2023 Key 9OPEN BOX 14 950 Brush КР – 4024 Key 11х13 MOTOR 10 11×1351 S = 50×558АТ.9101.01725 Key 12x14MOTOR 10 12×1452 Key S = 55×60Ч8АТ.9101.05126 Key 14х17MOTOR 10 14×17 53 Pull pin 8АТ.9101.46027 Key 17x19MOTOR 10 17×19

Working fluid: at an outside air temperature above + 10 ° С for washing, boiling water in accordance with GOST 2874-82 without mechanical impurities or distilled water GOST 6709-72 or a mixture of water and alcohol GOST 18380-78 for emulsification Protective water-displacing composition (ZVVS) TU 38401673-87 at temperature from + 10 ° С to -20 ° С for flushing 40% alcohol GOST 18300-78 and 60% water Emulsion tank capacity, l, not less than 6.5 Tank capacity for flushing fluid, not less than, l 30 Flushing fluid consumption, l / min, not less than 11 Pressure liquid in front of nozzles, kgf / cm2, not less than 1.5 Amount of emulsion injected in one cycle, not less, ml 250 Power supply from the helicopter on-board network: Current consumption, not more, A DC voltage, V 15 24 ,,, 29.4 Noise level, dB90 unit dimensions in transport position 1000 x 600 x 600 Dry weight, no more than, kg 44.3

Main technical characteristics Freon grade 114B2, 13B1 Freon tank capacity 35 L. Compressed air pressure in a charged fire extinguisher, MPa (kg / cm) 10 (100) Time for refueling one fire extinguisher 10-20 minutes Supply voltage of weighing devices 220 V, 50 Hz, 1 phase or from a battery Overall dimensions (length x width x height), mm 1560 x 715 x 1700 Weight, kg no more than 350 At the request of the customer, the unit can be equipped with a small-sized air compressor that allows you to continuously replenish the unit's cylinders with high-pressure compressed air or fill them with compressed air for other needs, compressor drive can be in three versions: -350 V, 50 Hz, 3 phases-220 V, 50 Hz, 1 phase – gasoline engine.

Main technical characteristics Freon grade 114B2, 13B1 Freon tank capacity 35 L. Compressed air pressure in a charged fire extinguisher, MPa (kg / cm) 10 (100) Time for refueling one fire extinguisher 10-20 minutes Supply voltage of weighing devices 220 V, 50 Hz, 1 phase or from a battery Overall dimensions (length x width x height), mm 1560 x 715 x 1700 Weight, kg no more than 350 At the request of the customer, the unit can be equipped with a small-sized air compressor that allows you to continuously replenish the unit's cylinders with high-pressure compressed air or fill them with compressed air for other needs, compressor drive can be in three versions: -350 V, 50 Hz, 3 phases-220 V, 50 Hz, 1 phase – gasoline engine.

Main technical characteristics 1 Overall dimensions (length x width x height), mm 900x165x500 2 Dry weight, no more than, kg 353 Inner diameter of the wheel hub, mm 60, 80, 90, 1104 Outer diameter of the wheel rim, mm 290-620

Main technical characteristics OPERATING CONDITIONS Air temperature, ° С -50 … + 50 Permissible wind speed, at a height of 10 m., M / s for working condition – 14 for not working condition – 40 Cart rotation mechanism rotating toothed peredachaUgol nx360 ° STRELAKonstruktsiya teleskopicheskayaKolichestvo 3Podom sections and lowering the boom sections gidrotsilindrVydvizhenie ruchnoePrivod cargo winches gidromotorGIDRAVLIChESKAYa SISTEMATip otkrytayaPrivod gasoline pump drive dvigatelAvariyny nasosOmkost manual hydraulic tank, control 16UPRAVLENIETip l gidravlicheskiySISTEMA BEZOPASNOSTIVid safety valve gidrosistemyRABOChIE PARAMETRYGruzovoy point maximum, t m ∙ least 2,83Gruzopodomnost , t: at a minimum outreach of 0.99 at a maximum outreach of 0.195 Boom reach, m (with a boom length of 7.3 m): minimum 2.425 maximum 7.1 at maximum lifting capacity 2.78 Maximum lifting height hook ma, m 7.20 Maximum speed of lifting – lowering of the hook, m / min 4.5 Landing speed, m / min, no more than 0.4 Rotation frequency, rpm 0.2-3.0 Time of full change of the outreach, s: from maximum up to minimum 18 from minimum to maximum 22 TRANSPORTATION DIMENSIONS Length, mm 3810 Width, mm 1880 Height, mm 1110 Full weight of the crane, kg, no more than 950

Main technical characteristics Working fluid AMG-10 GOST 6794-75 Type of manual pump Maximum pressure, MPa, not more than 1.55 Filtration degree: nominal, μm5 absolute, μm8 Volume of working fluid to be filled into the tank of the device, l, not more than 1.8 Volume of working fluid to be filled into the helicopter hydraulic system, l , not more 13 Consumption for 10 cycles (double strokes) at a swing speed of 1 cycle per second, not less, l / min 0.27 Overall dimensions (LxWxH), mm 420х265х350 Dry weight, kg, not more than 13 changes do not impair the technical characteristics and performance of the product. When ordering a product, specify the characteristics.

Main technical characteristics Changes can be made in the design of products without being reflected in the technical documentation, if these changes do not entail a deterioration in the technical characteristics and performance of the product. When ordering a product, specify the characteristics.

Main technical characteristics 1 Height of the working platform above the ground, mm 3160 2 Working area of the platform, mm 632×6323 Weight, kg 40.97 Changes in the design of products can be made without being reflected in the technical documentation, if these changes do not entail a deterioration in the technical characteristics and performance of the product. When ordering a product, specify the characteristics.

Main technical characteristics Length with wheel, mm 1955 Width, mm 1376 Height (transport), mm 635 Travel speed of unloaded bogie, km / h 6 Weight, kg 70,141

Main technical characteristics Overall dimensions: Length, mm2244Height, mm1182Width, mm1000Mass, kg 8АТ.9931.000-03 8АТ.9931.000-05 98 102 the performance of the product. When ordering a product, specify the characteristics.

Main technical characteristics Changes can be made in the design of products without being reflected in the technical documentation, if these changes do not entail a deterioration in the technical characteristics and performance of the product. When ordering a product, specify the characteristics.

SINS MEMS "GL-VG109" are intended for land, sea and aviation applications for solving navigation problems (including autonomous, in the event of loss of the GLONASS / GPS signal – forests, tunnels, when satellite signals are jammed), orientation, stabilization, and control of other numerous parameters (rolls, pitches, shocks, leveling, etc.) Some application options: – Providing information about the coordinates of an object in the event of satellite systems failure: special vehicles (Ministry of Internal Affairs, Ministry of Defense, Ministry of Emergencies, etc.), transportation of dangerous people and valuable goods, auto insurance, automatic identification of emergency and dangerous situations by the nature of the movement of the object – Automation of control of unmanned systems and objects / transport: ground, water, aviation – Management of automated systems and robotics for working in conditions dangerous to humans – Systems of stabilization of lines of sight, lighting, filming equipment, etc.: – Control of offshore platforms, manipulators and mechanisms obsessed with external disturbances (pitching, currents) – Systems of high-precision land use – Systems for detecting "stuck" in the road (railway) bed, as well as the functions of preliminary diagnostics of the railway track and control of deviations from the norms – Systems for stabilizing the antenna pattern of mobile satellite TV systems, Internet, telephone communication – Directional drilling – Application of oil and gas pipelines monitoring in diagnostic in-line shells – Measuring the movements of an employee in any position of the body, including crawling, ensuring accurate positioning of an employee in rooms when the satellite system is not working, detecting "uncharacteristic" movements of an employee. – Many other applications where it is required to solve the problems of operational control, navigation, orientation and stabilization. BINS MEMS GL-VG109 equipment, systems and complexes of stabilization and orientation. Those. specifications Heading (σ), °: Does not determine Yaw angle, drift (σ), ° / hour: 50 Roll, Pitch (σ), °: – 0.4 (odometer or SNS) – 1.0 (odometer and SNS missing) Distance reckoning accuracy (σ) (odometer required): 3% (of the distance traveled within 5 minutes after the loss of data from the SNS) Yaw angle increment error (σ),%: 0.8 External factors Temperature (stability), ° C: -40 … + 55 Temperature ( strength), ° C: -55 … + 85 Vibration (strength) (random 20 Hz – 2000 Hz), g: 6 Shocks (strength) (duration: 1 ms, shape: ½ sine), g: 90 exhibitions, sec: 0.5 / Frequency of data output, Hz: 500 Electrical parameters Output interface: RS232, RS485 Supply voltage / power consumption: 9 … 30 V / <1.5W Mass and dimensions Dimensions (lxwxh), mm: 89x51x17 Weight, kg: 0.075 MTBF (calculated): 40,000 hours