Special transport

The UMG E140W wheeled excavator is designed for small and medium-sized excavation work in urban environments. It is used on various construction sites and in large construction projects. The main quality is mobility when moving between work sites. The wheeled excavator does not interfere with transport. It can move quickly between dense structures and buildings. The wheeled excavator has increased maneuverability and movement speed compared to tracked vehicles. The main working tool is a bucket. The excavator can be equipped with various attachments. This will expand the scope of the excavator and increase its productivity. The difference from competitors is reliability, simplicity of design, simple maintenance, and reasonable price. Those. specifications Maximum digging depth, mm 4950-5940 Bucket capacity according to SAE, cu. m 0.32-0.8 Operating weight, t 13.2 / 13.4 / 13.6 Engine Deutz BF 4M 2012 Power, kW (hp) 67 (90) Stick, mm 2000/2310/2800 Voltage, V 12 Carraro axles (Italy) Bosch Rexroth hydraulics Maximum digging depth, mm 4945-5805 Length, mm 8050 Width, mm 2500 Height for working equipment, mm 3110-3755 For cab, mm 3062

Designed to deliver personnel, fire equipment to the fire site, carry out actions to extinguish fires in forests, cities and other settlements and carry out emergency rescue operations. The convenient design of the cabin provides accommodation for a combat crew in the amount of 7 people (including the driver). Those. specifications TECHNICAL CHARACTERISTICS Base chassis KamAZ – 43118 Wheel arrangement 6×6 Engine power, kW (hp) 221 (300) Engine type diesel Fuel type DTFighting crew, pers. 7 (6 + 1) Water tank capacity, l 7000 Foam tank capacity, l 600 Type of fire pump used NCPK-40 / 100-4 / 400 Nominal flow (normal pressure stage), l / s 40 Nominal flow (high pressure stage), l / s 4 Nominal head (normal pressure stage), m.w. Art. 100 Nominal head (high pressure stage), m.w. Art. 400High pressure hose line SRVDK-2 / 400-60 Location of the fire pump Rear Vacuum system AVS-01EN Highest suction height, m 7.5 Full name of the tank truck AC-7.0-40 / 4 (43118) Possibility to install the "integrated NATISK" option is

The volume of the received fire-extinguishing substances is up to 100,000 liters. Continuous operation of the barrel "A" from its own capacity – up to 40 minutes! The area for extinguishing flammable and combustible liquids with compression foam with a standard intensity of 0.027 l / (sq. * S) – 500 sq. m.! Automatic maintenance of the multiplicity regardless of the flow rate and pressure! System control is easier than a regular smartphone! Those. specifications CHARACTERISTICS OF THE NATISK SYSTEM: Compression foam system NATISK-800KS Air compressor drive from the chassis transmission Working pressure 3-10 atm Maximum solution flow 800 l / min Range of the jet from the manual barrel up to 35 m Maximum compressed air consumption 4 600 l / min Rate 5-20 Foam concentrate dosage 0.6 – 6% Manual barrel inner diameter 25 mm (3 pcs) Volume of produced foam from 25,000 liters ("wet foam") to 100,000 liters ("dry foam") TECHNICAL CHARACTERISTICS: Basic chassis KAMAZ-43118 Wheel arrangement 6×6 Engine power 300 hp .Ecological class Euro-5 Combat crew 6 people Water tank 5,000 l Foam tank 300 l Fire pump NTsPN-40/100 Unique nature of the NATISK system: – reduction of extinguishing time up to 7 times – reduction of spills to a minimum – minimal risk of re-ignition – height of supply of extinguishing agents – up to 250 meters – the safety of the owner – reliable protection of horizontal and VERTICAL surfaces from the spread of fire – environmental friendliness – confident exploitation weathering at low temperatures (-60 C)

Fire tanker AC-SPK-3,0-40 (5557) with NATISK system (own development of the Spetsavtotekhnika fire-fighting vehicle plant) is intended for delivery of combat crew and fire-fighting equipment to the place of fire. 3.0-40-NATISK (5557) allows you to get up to 60,000 liters of extinguishing agents. The cab of the tanker is designed for 7 people (including the driver) of the combat crew. In the cockpit of the crew there are two rows of seats for the crew, with mounts for breathing apparatus built into the seat backs. Those. specifications TECHNICAL CHARACTERISTICS: Base chassis URAL – 5557 Wheel arrangement 6×6 Engine power, h.p. 230 Diesel engine type Overall dimensions, mm 8695х2500х3100 Combat crew, persons 7 Water tank capacity, l 3000 Foaming agent capacity, l 180 TECHNICAL CHARACTERISTICS OF THE NATISK SYSTEM: Technology of high-efficiency compression foam supply (Foam volume produced, l from 15,000 to 60,000) (wet) foaming agent,% 0.2-6.0 Foam consumption, l / s 50 Range of foam feeding through the manual barrel, m up to 40 m Number of barrels supplying foam 2 Number of barrels supplying water 2 Air reserve for foaming is unlimited Diameter of hose lines, mm 51 Length of hose lines, m 400 UNIQUE SYSTEMS "NATISK": – reduction of the extinguishing time by up to 7 times – reduction of spills to a minimum – minimal risk of re-ignition – range of supply of fire extinguishing agents – up to 40 meters – work at low temperatures (up to – 50 ° C) – safety of the operator – reliable protection of horizontal and VERTICAL surfaces from the spread of fire – instant deployment at the fire site – ecol ogichnost – the ability to work with a small number of combat crew – ease of pressure hoses with foam – increased radius of action (small pressure losses) – the ability to supply along a vertical pressure line to a height of 250 m Extinguishing all types of fires: – in an apartment building of any number of storeys – in a cottage building – in forests – in business buildings – at industrial enterprises – at facilities of the gas and petrochemical industry

A fire-fighting tanker with a foam compression method (NATISK system) АЦ-SPK-1,0-40 (С42R33) is intended for delivery of personnel and fire-fighting equipment to the fire site, carrying out actions to extinguish fires with water and / or compression foam, carrying out rescue operations in cities and other settlements, at enterprises of the petrochemical industry and in places where oil products are stored. AC can be operated in temperate climates on all types of roads. Those. specifications TECHNICAL CHARACTERISTICS: Basic chassis GA3-С42R33 Wheel arrangement 4 x 2 / rear Engine power, h.p. 109.5 Diesel engine type Overall dimensions, mm 7500x2350x3000 (dimensions may vary depending on the AC version) Combat crew, persons 7 Water tank capacity, l 1000 Foam concentrate capacity, l 60 TECHNICAL CHARACTERISTICS OF THE "NATISK" SYSTEM: Technology of high-performance compression foam supply, l from 5000 (wet foam) to 20,000 (dry foam) Foaming agent dosing,% 0.6 – 6 Foam consumption, l / s up to 25 Foam feeding range through the manual barrel, m up to 30 Number of barrels supplying foam 1 Number of barrels supplying water 1 Air supply per foaming is unlimited Diameter of hose lines, mm 51 Length of hose lines, m 200 UNIQUE OF THE NATISK SYSTEM: – reduction of extinguishing time by up to 7 times – reduction of spills to a minimum – minimal risk of re-ignition – range of supply of extinguishing agents – up to 30 meters – operation at low temperatures (up to – 50 ° C) – safety of the owner – reliable protection of horizontal and VERTICAL surfaces from the spread of fire ara – instant deployment at the fire site – environmental friendliness – the ability to work with a small number of combat crew – lightness of pressure hoses with foam – increased radius of action (low pressure losses) – the ability to supply along a vertical pressure line to a height of 250 m EXTINGUISHING ALL KINDS OF FIRE: – in an apartment building a house of any number of storeys – in a cottage building – in forests – in business buildings – at industrial enterprises – at facilities of the gas and petrochemical industry

Designed to deliver personnel, fire equipment to the fire site, carry out actions to extinguish fires in forests, cities and other settlements and carry out emergency rescue operations. The convenient design of the cabin provides accommodation for a combat crew in the amount of 7 people (including the driver). Those. specifications TECHNICAL CHARACTERISTICS Base chassis KamAZ – 43253Wheel formula 4x2Engine power, kW (hp) 150.3 (204) Maximum speed, km / h 90 Engine type diesel Fuel type DTFighting crew, pers. 7 Overall dimensions, mm 7700х2500х3100 Water tank capacity, l 5000 Foam tank capacity, l 300 Full name АЦ-5,0-40 / 100 (43253) TECHNICAL FEATURES The cab consists of two parts: front, rear. The front and rear parts have an audiovisual connection through the window opening, which is sealed automatically when the front cab is moved to the transport position. Access to the power unit is provided with the standard lifting of the front of the cab. The second cabin is heated by an autonomous heater. Capacious compartments for fire-fighting equipment provide the possibility of extended configuration. The pump is driven by the car engine through a power take-off and cardan drive. The initial filling of the suction line and pump when water is taken from the reservoir is carried out by a vacuum system. Possibility of operation in regions with a temperate climate at an ambient temperature from minus 40 to plus 40 ° С.

A fire-fighting tanker is designed to carry out actions to extinguish fires and perform rescue operations at enterprises for the extraction, preparation and transport of natural gas, as well as oil and oil products. Those. specifications Base chassis -43118 Wheel arrangement 6×6 Engine power kW (hp) 221 (300) Engine type diesel Combat crew 7. (6 + 1) Water tank capacity 5000-8000 liters Foam tank capacity 360-600 liters Type of fire pump NCPN 40 , 70, 100, Nominal head of normal pressure m. Water. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

Carrying out actions to extinguish and perform emergency rescue operations at the enterprises of production, processing, storage and shipment of oil and oil products. Those. specifications Base chassis -43118 Wheel arrangement 6×6 Engine power kW (hp) 221 (300) Diesel engine type Combat crew 7. (6 + 1), 3. (2 + 1) Water tank capacity 4000-8000 l. Foam tank capacity 360- 600 l Type of fire pump NTsPN 40, 70, Nominal normal pressure head of water. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

Attachments imported by Liebherr, Germany. Roll boom 4-section folding 38 m long. The use of such an arrow can significantly reduce the overall dimensions. Provides a wide range of maneuvering (up to 12 degrees of freedom) of movement of the end section of the boom, which allows the boom to work in confined conditions, through technological ramps, under technological ramps, as well as in other hard-to-reach places. The location of the slewing ring directly behind the cab of the vehicle chassis. The slewing support design should be capable of horizontal unfolding of the boom parallel to the ground over its entire length above the chassis cab. Due to this, to provide an outreach of the boom in the horizontal plane within 35 m, which will make it possible to guarantee the supply of fire extinguishing substances to the "mirror" of the VST with a volume of 20,000-50,000 m3. with an inner diameter of 150 mm of constant cross-section. The joints of the water pipelines are of the articulated type. Main – The foam concentrate is supplied by a pressure pump. The system performance corresponds to the performance of the fire pump 70-150 l / sec when receiving the foaming agent solution – 1-6%. – Duplicating – Through the foam mixer KSHIN-PS-16. The system performance corresponds to the performance of a fire pump 70-150 l / s when receiving a foaming agent solution – 1-6%. – Reserve – Through a built-in adjustable Foam concentrate dispenser with a d-77 mm connecting head. 6. The capacity of the chassis fuel tank is 350 liters. (a power reserve of more than 400 km is provided). The capacity of the additional fuel tank is 450 liters. 7. At the end section of the boom, a special rotary device (SPU) with a KOMLOK quick-release fastener is mounted, which allows you to quickly attach and remove the exported standard fire equipment. Removal and installation of fire fighting equipment is carried out from the ground when lowering the end section of the boom. If necessary, to change P.O. it is possible to rest the last boom section on the ground. During the supply of the extinguishing agent, the maneuvering of the rotary platform (SPU) is additionally provided, by the angle of rotation (not taking into account the angle of rotation of the boom), in degrees: – In the horizontal plane – 120 (± 5) – In the vertical plane – 90 (± 5).

The PNS fire pumping station is designed to supply water, a foam solution over long distances along main lines, to power fire tankers, fire foam lifters, at enterprises for the extraction, processing, storage and shipment of oil and oil products. Those. specifications Base chassis -43118 Wheel arrangement 6×6 Engine power kW (hp) 221 (300) Diesel engine type Combat crew 3. (2 + 1) Fire pump type NCPN 100, Nominal normal pressure head m. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

Base chassis -65111 Wheel arrangement 6×6 Engine power kW (h.p.) 221 (300) Diesel engine type Combat crew 3. (2 + 1) Foam tank capacity 0-3000 l Type of fire pump NCPN 100, Nominal normal pressure head of water m. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

The URB-2A2 drilling rig is one of the most popular models in this range of drilling machines due to its reliability and versatility. URB-2A2 is designed for drilling geophysical and structural exploration wells, field exploration, engineering and geological surveys, construction wells, construction of water intake and blast wells at temperatures from -400 to +400 C. The URB-2A2 drilling rig is equipped with a movable rotary perform rotary drilling with flushing or bottom hole blowing, as well as drilling with augers. The hydraulic cylinder and the tackle system ensure the movement of the rotator along the mast, due to which drilling and extension of the drilling tool occurs. Together with the hydraulic jack, the rotator performs lowering, lifting and feeding of the drilling tool. The URB-2A2 unit can be equipped with two 4VU1-5 / 9 compressors, with a 4VU1-5 / 9 compressor and a NB-50 or NB-4 mud pump, or a KV- compressor station. 10 / 10S, KV-12 / 10S, KV-12 / 12S. Those. specifications Specifications Measurements Value Angle of inclination of boreholes to the horizon grad90 Initial drilling diameter mm 190 Maximum drilling depth with flushing m 350 Finishing diameter drilling with flushing mm 93 Depth of drilling with auger mm 30 Finishing diameter of auger drilling mm 150 Depth of drilling with air purge m 100 Final diameter of drilling with a flush drill mm 10.4; 0.7; 1.0; 2.33 Stroke of the rotator mm5200 Maximum torque on the spindle N * m2000 Lifting speed of the drilling equipment / s 0-1.25 Permissible load on the hook (elevator) kN (kgf) 50 (5000) no more Working pressure in the hydraulic system MPa (kgf / cm2) 10 (100) ± 5% Overall dimensions in transport position mm 8330x2500x3980 / 8700x2500x3980 Overall dimensions in working position mm 8330x2500x8380 / 8500x2500x8400 Unit weight kg 15205/15280

APSH unit provides for the following works:• Loading, transporting, unloading and assembly of the long oil-field equipment,steel and polymer pipes and booms up to 12 m in length, power transmissionline supports.Structural features are as follows:• Application of hydraulic manipulator with lifting capacity up to 4 tons.• Availability of hoisting devices;• All-wheel drive tractor unit;• Semitrailer truck with single wheel tire;• Work in different environmental conditions (from -40°С to +40°С);• Easy in service.

AROK unit provides the fulfillment of the following works:• Welding and gas cutting;• Refilling and changing of the oil in gear units and lubrication of bearingunits;• Painting of the equipment and buildings;• Tool and bench;• Transportation of different loads with total weight up to 2000 kg.

Depending on specific environmental and on-site conditions the T10M series bulldozers can be optionallycompleted by the components as follows:Mechanical transmission – improved efficiency; easy-to-service machine;Hydromechanical transmission – high efficiency; improved operating environment;Planetary final drive and detached undercarriage balancing axle – extended transmission life; for moving heavy soils;Swamp versions – for moving low bearing-capacity soils;Various attached implements: dozer and ripper equipment, pull winch etc.

ANRV unit provides the fulfillment of the following works:• Welding and gas cutting;• Tool and bench;• Pumping of various liquids;• Loading and unloading;• Equipment and fittings units transportation;• Pipeline overhaul, including polyethylene coated.

The UVN-5 unit combines the capabilities of both a vacuum machine and a pumping station, which allows it to take a product from a distance of 150 meters and a depth of up to 80 meters and simultaneously pump it with a pressure of 7 kg / cm² (as standard) and more on significant distances. It can be made on the chassis of any car or as a stand-alone version. Serially produced on the chassis Kamaz 6×6 and Ural 6×6. It is irreplaceable in the elimination of the consequences of natural disasters (fires, floods) and man-made disasters (emergency oil spills, etc.) Tech. specifications APPLICATION FOR EXTINGUISHING FOREST FIRES: 1. The chassis can deliver a large volume of water to the fire site (up to 45m³) 2. The ability to take water from natural reservoirs from a distance of up to 150m even in the absence of equipped access roads. At the same time, the density of water and the presence of mechanical impurities are not important – the transfer pump is capable of working with mechanical impurities up to 10 mm in size. providing its fine filtration 5. The ability to be a pumping station when taking water from natural reservoirs and transporting it with an overpressure of 7 kg / cm² (standard) and more over considerable distances for a long time 6. The ability to extract water from a depth of 25 m (up to 80 m in additional equipment) in cyclic mode (high steep bank, well, mine, etc.) APPLICATION IN ELIMINATION OF THE CONSEQUENCES OF FLOODING AND FLOODING 1. Pumping water from flooded areas and from flooded premises from a distance of 150 m2. pressure of 7kg / cm² (standard) and more for significant p distance for a long time – to a dry residue – even without being in the flooded zone 3. Possibility of collecting liquid from deep basements, wells, mines from a depth of up to 25 m (up to 80 m in optional equipment) 4. Possibility to collect residues directly into a tank and take them to disposal sites

The URB-40 drilling rig is designed for drilling and repairing industrial water supply wells, as well as for the construction of technical wells, including degassing, ventilation, dewatering wells and wells for laying communications in underground mine workings, wells for hydraulic production and underground leaching. URB-40 can be installed on the chassis of KAMAZ, URAL, semi-trailers and other vehicles at the request of the customer. Applied drilling technologies: rotary coreless with flushing; percussion rotary percussion-rotary coreless with backflush according to RC technology rotational with backflush (ERLIFT); Options for URB-40: 16 kW electric generator; surfactant dosing pump; set of equipment and tools for backwash drilling; manifold for connecting additional equipment (mud pump, compressor) Tech. Specification Permissible hook load, KGS40 000USLOVNAYA drilling depth, M1000DIAMETR USED DRILL PIPE, MM73; 89; 114REKOMENDUEMY drilling diameter in mm: INITIAL / KONECHNYY780 / 190,5MAKSIMALNY Casing string diameter, MM660LEBEDKA BUROVAYADVUHBARABANNAYA, Orthogonal reducer with helical gears and planetary gear units BARABANAHTYAGOVOE EFFORT winch SECOND winding turns rope on the drum, the PSC 7500 * rOTOR RG-425 by hydraulic HYDRAULIC disqualification from the mouth SKVAZHINYNAIBOLSHY torque kgf M1600CHASTOTA table rotation rotors, ON / MIN0 – 180LEBEDKA AUXILIARY with crane UKOSINOYGIDROPRIVODNAYATYAGOVOE EFFORT KGS2 200MACHTA: truss CONSTRUCTIONS WITH OPEN FRONT EDGE, TELESCOPIC, VERTICAL – DISTANCE FROM THE ROTOR TABLE TO THE AXIS OF THE CROWN BLOCK, M17,8- DISTANCE FROM THE GROUND TO THE AXIS OF THE CROWN BLOCK, M, NOT LESS 19.3 / LENGTH OF THE BULB M12 SWIVEL: – PERMISSIBLE LOAD, KGS30 000 – DIAMETER OF THROUGH HOLE BE RTL, MM60 WORKING PIPE: CIRCULAR SECTION WITH GUIDES – DIAMETER OF WORKING PIPE, MM114 – LENGTH OF WORKING PIPE7 OVERALL DIMENSIONS (TRANSPORT), MM: – LENGTH / WIDTH12500 / 4000

– sampling of soil "dry", with blowing, incl. with down-the-hole hammer (PPH), with flushing, vibration and percussion-rope methods; – static and dynamic sounding (including according to the SPT standard), stamp tests, soils; – high-power drilling blocks, rotators with a torque of up to 700 kg m; – drive of the drilling unit from its own engine or engine of a transport base; – lifting capacity on a rotator up to 9000 kg – use of drill pipes up to 4.7 m long; – use of casing pipes up to 6.0 m long; – availability of special winches in t .h. for percussion-rope drilling, with a carrying capacity of up to 3000 kg; – the presence of highly efficient mud pumps, with a capacity of up to 660 l / min., with a pressure of up to 63 atm.; ATM; – a wide range of hydraulic drilling tables (pipe holders) for holding, vertical movement and rotation of drill and casing strings up to 300 mm in diameter; – the presence of a vibration drilling module, vibration frequency up to 150 Hz; – a large selection of wheeled and tracked transport bases (chassis ) with high carrying capacity and high all-terrain qualities – KAMAZ, URAL, MTLB, MTLBu, TT-4, sleigh, pontoon; Those. specifications CONDITIONAL DRILLING DEPTH, M: – AUGERS, DIAMETER 135 MM60 – AUGERS, DIAMETER 350 MM35- WITH FLUSHING, DIAMETER 93 MM (including diamond drilling) 300 ** – WITH A BLOWING, DIAMETER DIAMETER 100 MM 100 diameter up to 250 MM100 ** – cable-with a diameter of 146 MM35-40- Vibrating SPOSOBOM25USLOVNY drilling diameter in mm: 500PRIVOD OBORUDOVANIYAAVTONOMNY OR THROUGH ENGINE CHASSIS KOMMACHTAS mechanism of longitudinal displacement (dumping) for directional drilling / emphasis in GRUNTHOD longitudinal movement MM1000VRASCHATELGIDROPRIVODNOY , WITH A HYDRAULIC DRIVE OF A DETACHMENT FROM THE AXIS OF THE WELL AT 800 MM ROTATOR'S TRAVEL, MM3400; 5200 SPEED OF MOVEMENT OF THE ROTATOR, M / SEC1,0 TORQUE OF THE ROTATOR, KGSM410; 700; 1200; 2000 * ROTATION OF THE DRILLING COLUMN, RPM: – I RANGE 10-320 – II RANGE 10-710 (1000) * TRAVELING EFFORT OF THE ROTATOR, KGF: – UP6000 / 5000/9000 * – DOWN , Hz 150 WINCH TYPE HYDRAULIC DRIVE, FRICTION TYPE, WITH FREE ROPE ROPE WINCH CAPACITY, KG3000 9 MCC / MIN., 10 ATM (10 MCC / MIN., 10 ATM) SCREW COMPRESSOR TYPE NK-1607 MCC / MIN., 7 ATMKOMPRESSOR PISTON TYPE 4VU1-5 / 9 KV-12 / 12S5 M .CUB./MIN., 8 ATM BURNER PUMPS: PISTON PUMP NB-50 660 LITERS MINUTE, 63 ATM. MM63-146 PIPE HOLDER (2) HYDRAULIC, SWING CLAMP, MM63-146 PIPE HOLDER (3) HYDRAULIC, SWING CLAMP, MM6 3-300TRUBODERZHATEL (4) hydraulic, with a V CLAMP DVIZHENIYADIAMETRY, MM63-300HOD vertical movement MM300USILIE vertical movement, DOWN / UP KG10000 / 6000STOL CASING (SOG) hydraulic, with a V CLAMP DVIZHENIYADIAMETRY, MM63-426HOD vertical movement, MM400 / 600 * VERTICAL MOVEMENT EFFORT, DOWN / UP, KG 8000 (20000 *) / 15000 (18000 *) MAX. Kg, MENEE20000 * MODULE static ground sounding (SZGU) HYDRAULIC PRIVODHOD vertical movement MM1200USILIE vertical movements, DOWN / UP, KG10000 / 7000MODUL DYNAMIC SOIL PROBING (KDZ) middle classes, GOST 19912-2012, SPT, PRIVODMASSA HYDRAULIC HAMMER, KG60 * depending on the modification of the installation ** depending on the pumping and compressor equipment used

PBU-2 provides percussion-rope drilling with the use of driven nozzles and soil carriers, core and coreless "dry" / with flushing / with blowing, percussion-rotary (pneumatic hammers), auger, drilling with the use of pits, and also performs static and dynamic sounding of soils … This installation has various options for mounting on transport bases: wheeled – KAMAZ (including a two-row cab), URAL, ZIL-131 (AMUR), MAZ, tracked transporters TGM-126, MTLBu, tractors TT-4 and TLT-100A , sled base, pontoons, etc. Drive options – from a deck engine or from a transport base. PBU-2 is mounted on its own frame driven by an autonomous diesel engine, which makes it possible to mount it on mobile vehicles that do not have their own engine, or on which power take-off is not possible. The use of a deck power unit allows you to reduce the depreciation costs associated with the operation and maintenance of the vehicle engine, significantly reduce fuel consumption. At the request of the customer, a modification is produced with a drive from the transport base engine. A mechanically driven movable rotator in combination with a powerful hydraulic feed mechanism allows creating a significant axial load on the rock cutting tool from the first meters of drilling. The design of the rotator provides the ability to move it away from the axis of the borehole for tripping operations, installing casing strings and implementing the technology of percussion-rope drilling using a drawworks. The PBU-2 controls are located at the base of the mast on the unit frame. For ease of operation, the rig is equipped with a removable drilling operator platform. Hydraulic jacks are provided. These installations have a wide geographical application throughout Russia, in the CIS countries, Asia, Africa, etc. and are the receiver of the UGB-1VS and PBU-1 installations, which have proven themselves from the best side since the times of the USSR. Operation of the machine is allowed in areas with a temperate climate in the temperature range from – 40 ° С to + 40 ° С (Arctic version is possible up to – 50 ° С). PBU-2 manufactured by "Geomash" have high maintainability in the field and are certified. Those. specification feeding stroke, MM1800 / 3500 * SPEED spindle ON / MIN25 – 430KRUTYASCHY MOMENT KGSM500USILIE innings, CFSs – UP 8000 VNIZ10000MAKSIMALNAYA load hoist, KGS2 600USLOVNAYA drilling depth, m: – SHNEKAMI60- shnekovo BUROM25- auger sliding along BOOM16- WITH BLOWING100- WITH FLUSHING 100-120- IMPACT-ROPE50 DRILLING DIAMETER, MAX, MM: – AUGERS 400- AUGER DRILL850- WITH WASHING215,9- WITH BLOWING250- IMPACT-ROPE – depending on modification168 *

Main features: – “dry” soil sampling by shock-rope method; percussion-driven method with a hydraulic hammer; – dynamic sounding (including according to the SPT standard) of soils; – light high-power drilling units, rotators with a torque of up to 260 kg.m., – drive from our own engine, gasoline / diesel, or the engine of the transport base; – lifting capacity on the rotator up to 3000 kg; – use of drill pipes up to 1.7 m long; – use of casing pipes up to 3.0 m long; – availability of special winches, incl. for percussion-rope drilling, with a lifting capacity of 400 and 1000 kg; – the presence of a centrifugal pump, with a capacity of 700 l / min., with a pressure of up to 7 atm.; – the presence of a hydraulic drilling table (pipe holder) for holding, drill and casing strings, up to 127 mm in diameter ; – a large selection of wheeled and tracked transport bases (chassis) for mounting a drilling unit, with a carrying capacity of 700 kg., UAZ-3303, UAZ-39045, GAZ-3897 "Huntsman", GAZ-330273 "Gazelle", tracked all-terrain vehicle BV -206 "Hagglunds" (Sweden), GTM-0.8, on a car trailer MZSA, etc. Tech. specifications CONDITIONAL DRILLING DEPTH, M: – AUGERS, DIAMETER 135 MM40- IMPACT DRILLING METHOD15- WITH FLUSHING, DIAMETER 151 MM50- WITH BLOWING, DIAMETER 151 MM50- WITH PNEUMINOUS DIAMETER DRILLING DIAMETER, MM: 250 DRIVE OF EQUIPMENT AUTONOMOUS OR FROM CHASSIS ENGINE THROUGH DRIVE POWER, PETROL / DIESEL, kW 2200 SPEED OF MOVEMENT OF THE ROTATOR, M / SEC0.7 TORQUE OF THE ROTATOR, KG.M150; 260 * DRILLING COLUMN ROTATION, RPM 0-700 / 0-200 ROTATOR DISPLACEMENT FORCE, KGS: – UP 1500/3000 * – DOWN 1500/2000 * WINCH TYPE HYDRAULIC DRIVE, WITH FREE DIFFUSION, type SBOO1 BURENIYAENERGIYA pass, Dzh80BUROVOY PUMP: C, independent drive (GASOLINE) PUMP TSENTROBEZHNYY700 LITERS MINUTE 7 ATM.TRUBODERZHATEL GIDRAVLICHESKIYDIAMETRY clamp MM63-127MODUL SENSING DYNAMIC GROUND (KDZ) MEDIUM CLASS, GOST 19912-2012, SPT, PRIVODMASSA HYDRAULIC HAMMER, KG60

LBU-50-30 provides drilling: – with flushing to a depth of 200 meters * – with back flushing to a depth of 100 meters – pneumatic percussion drilling with simultaneous casing to a depth of 100 meters. * Depending on the pump used and the final diameter of the well Technical features: LBU -50-30 is equipped with a hydraulic rotator, which provides: – a decrease in the hitch weight and an advantageous weight distribution along the axes of the transport base, which makes it possible to organize cargo platforms for transporting drilling tools; – smooth adjustment of the rotation frequency of the spindle of a two-speed rotator, which provides a torque in the range of 3500 Nm up to 20,000 Nm; – flexible and universal control of the feed mechanism with the possibility of accelerated (up to 5 times) movement of the rotator; The winch with a lifting capacity of 3000 kgf with a free release function allows you to effectively implement percussion-rope drilling (bailing), as well as well casing; Due to the torque at 2000 kgf * m the initial stage of drilling when landing a conduit The ktor can be passed by augers of larger diameter; High reliability due to the absence of a complex drive mechanism; Simplicity in maintenance and increased maintainability. Those. specification feeding stroke, MM3900CHASTOTA Spindle, ON / MIN0 – 200KRUTYASCHY torque max, KGSM2000USILIE innings, CFSs -. VVERH12000- VNIZ6200STOL HYDRAULIC CASING: 3000 – the maximum flow diameter (without cams) MM500 – the maximum diameter of the casing, MM426 – MINIMUM DIAMETER OF THE CASING PIPE, MM127 – DIAMETER OF THE APPLIED CASING PIPES, MM127, 146, 159, 168, 219, 245, 273, 325, 426 CONSTRUCTION DEPTH, M: – DRILLING AUGERS : – FLUSHED (FINAL) 190.5 – FLUSHED (FINAL)

It is used for installation on the knives of the cutting device of the Claas combine harvesters.

Please Note: Website Product Image May Be Different From Actual Product Image

It is a cost effective and maneuverable bulldozer for urban development and road construction. Its light weight and small size provide mobility in transport and the ability to work in confined spaces. Can be transported by helicopter. Cab, chest of drawers with elecrohydraulic control and microclimate control system provide a higher level of comfort for the operator.

It is a compact bulldozer, which, due to its size, can be transported by truck, body without the need for special permission. This bulldozer features hydrostatic transmission, which ensures high maneurability and productivity. Staright is the corner of the sheet and provides the power to perform a complete range of planning operations and ground movement.