Trailers and semi-trailers

The electrical indicator of contamination of the PS series is designed to signal the contamination of the filter element and is installed directly on the oil drain filter. temperature: from -40 ° C to + 90 ° C. Closing / opening pressure 1.6 ± 0.1 kgf / cm'or 0.16 ± 0.01 MPa. Those. specifications * – if necessary, the pollution indicator can be adjusted in the range from 1.2 to 5 kgf / cm "or 0.12 – 0.5 ± 0.01 MPa. Ingress protection class IP54 Thread length 12 mm

The electrical indicator of contamination of the PS series is designed to signal the contamination of the filter element and is installed directly on the oil drain filter. temperature: from -40 ° C to + 90 ° C. Closing / opening pressure 1.6 ± 0.1 kgf / cm'or 0.16 ± 0.01 MPa. Those. specifications * – if necessary, the pollution indicator can be adjusted in the range from 1.2 to 5 kgf / cm "or 0.12 – 0.5 ± 0.01 MPa. Class of dust and moisture protection IP54 length of the threaded part 10 mm

An electric level sensor of the LS series of our own production, designed to signal the minimum permissible oil level in the hydraulic system. The electrical sensor is equipped with a single-pole switch and is designed to operate in AC and DC circuits with voltages up to 48V and a current of up to 0.5A Operating temperature: from -40 C to +90 C. Full compatibility with HH-HL-HM-HV- fluids HTG according to ISO 6743/4. Ingress protection class IP54 Tech. specifications Sensor length 400 mm Mounting 5-point flange Diameter 70 mm on request can be equipped with an additional mounting with BSP thread 1 "

Filler neck for receiving fuel into the fuel tank Additional connection of the lid – using a chain Tech. specifications Filler neck opening diameter – 80 mm Body material neck – steel Bonnet connection type – bayonet

The filler neck (breather) is used on hydraulic tanks to fill the working fluid. Has a mesh in the neck to prevent dirt from entering the hydraulic system. And it also works as an air filter for a hydraulic tank, a replaceable filter element is installed in the lid. Those. specifications Nominal flow rate – 250l / min; Breather filtration fineness – 16 microns; Mesh filtration fineness – 800 microns.

Opens by turning around the horizontal axis of the hinge. Fixation from arbitrary rotation is carried out with a special bolt. Fastening in the towbar is carried out with a locking pin, like any other device under the "American square". Also, any American-type towbar device with a landing size of 50×50 can be installed in the gate itself. Product features: High quality workmanship. Powder painting, extremely resistant to corrosion. The wicket is equipped with a square hitch "American tow bar" (Adapter, ball and pin are optional). The wicket is made with tipping on the right side, but if you wish, you can order opening to the left. Those. specifications Dimensions: length 60 width 50 height 80 mm Weight: 13 kg