Antiadhesive (antiadhesive) "EPILAM SFK-20"

Thin-layer protective coatings EPILAM® SFK-20 for molds, HDPE, composite products, stamps, cutting tools using easily applied surface modifiers. Additionally, it is used to increase the wear resistance and chemical resistance of surfaces below the 6th class with Ra ≥ 1.6 (Ra ≥ 6.3), rubber goods, polymers. Protection against rubber goods from wear, adhesion by means of easily applied modifiers of porous surfaces. EXAMPLES OF USE • Stamps, press / cast molds, screws, extruders • Rubber goods, seals, polymers, composites • Release agent in plastic molding, in particular, for use in injection molding machines • Release agent for molds in the tire industry and the production of mechanical rubber goods • Units of food industry equipment – mixers, conveyors, refrigeration, packaging machines. • Tubing pipe threads • Pulling rubberized cable through the channel • Release and release agent during gluing • Release agent in brick production • Release agent in the production of HDPE • Vibrating lifters, rolls, conveyors, hinges • In the textile industry • Mud pumps • Plain bearings, friction fuel injection pumps, internal combustion engines Tech. specifications – Field of application – All areas of industry – Action – A thin protective coating is created, which can significantly reduce the coefficient of adhesion (sticking). – Density at t = 20 ° C – 0.8-1.3 g / cm³ – Consumption rate of 1 kg – by 12 … 16 sq. M (on average) – Number of layers – one layer – Drying time – Up to 10 minutes – Curing time – Up to 120 minutes – Application temperature – -20 ° С … + 40 ° С – Remover – Cleaner "Fluora-A1"