Antiseptic disinfectant for infectious diseases departments, MULTICID, 1000 ml

Application of the "Multicid" agent as an ANTISEPTIC for infectious diseases wards. The MULTICID product is a ready-to-use product and does not require dilution before use. careful processing of the periungual beds and interdigital areas. PARTIAL SANITARY TREATMENT OF THE SKIN COVER. Perform a single treatment: abundantly moisten a cotton swab or napkin (3 ml for each tampon / napkin) and carefully treat the contaminated area of the skin. The exposure time after the end of treatment is 1 minute. TREATMENT OF THE SURGICAL FIELD, including before the introduction of catheters, puncture of the joints. On the eve of the operation, the patient takes a shower (bath), changes the linen. A double treatment is carried out: the skin of the operating field is successively wiped twice with separate sterile gauze tampons, abundantly moistened with a product. The exposure time after the end of the treatment is 2 minutes. TREATMENT OF THE INJECTION FIELDS of the patients. A single treatment is carried out: the skin is wiped (once, in one direction) with a sterile cotton swab, abundantly moistened with a product (3 ml for each swab). The exposure time after the end of the treatment is 30 seconds. Application of the "Multicid" agent as a DISINFECTANT for infectious wards. Disinfection and cleaning of small-sized hard washable surfaces, objects, including hard-to-reach ones, requiring quick disinfection. The product is used without dilution. Method of processing: wiping at the rate of 30-50 ml / m2 of the surface. To process small in surface area, objects with a ratio of the treated area to the area of the room no more than 1: 10. The disinfection modes of surfaces and objects are presented in the table. The product dries without leaving marks on the surfaces. It is not required to rinse off the agent from the treated surfaces after disinfection. Cleaning of surfaces in rooms by wiping is allowed in the presence of personnel and patients.