Disc harrow

1. The frame will last a long time and will not break – you will not have to spend time and money on repair and reinforcement of the frame, as for the production of the frame profile pipes with a cross section of 100×100 mm are used, and a wall thickness of 5 mm, made not of "fence", but of machine-building steel. 2. Discs will last for a long time – you will not waste resources on changing discs too often, as they take longer to erase, because they are made of boron steel 5 mm thick, resistant to abrasion, and have a double sharpening, thanks to which the disc is self-sharpening when erased. 3. The post will not break or "sour" – you do not have to waste time and money on replacing the posts and knocking out the "soured" posts in order to adjust the angle of attack, because we install reinforced posts 58.5 mm, which bend cold, without changing the metal structure. The post has a grease channel and an oiler, and the bushing has a groove, whereby the post can be lubricated and grease is retained between the bushing and the post. 4. The cutting unit will not fail – you do not have to spend resources and time on repairing the cutting units, as they are reliable. The axle is made from a single piece of metal, not welded. The thread will not break – reinforced thread M27, instead of M24. The nut does not loosen – the washer does not deform, thanks to the increased nut. The bearings do not break – they are not skewed, because the seats are ground in one pass with an accuracy of 25 thousandths of mm. 5. The roller does not break and effectively compacts the soil – you will get a well-crushed and rolled soil, while retaining moisture, since the roller is quite heavy – it is made of a steel square 20x20mm. The spiral is directed in two directions, so weeds are scattered to the sides and the roller is not clogged. The bearings do not break because the loads are absorbed by the rubber expansion joints. 6. The equipment will not stand idle – you will not have to wait long for the elimination of malfunctions, and waste precious time during the cultivation period, since we have our own warehouse, and any components will be dispatched on the same day. We also have organized a cash fund to provide warranty repairs, so a service team will be sent to you immediately. in 46 regions of Russia