Emergency lighting installation

Price from: $ 1

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is designed for emergency deployment on the ground in the event of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel Tech. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 400 W. 3) Luminous flux – 48,000 – 120,000 lm. (Installation of two or more lamps is possible). 4) Compressor – with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m. 7) Total weight – 65 kg. (The weight may vary depending on the configuration). 8) The time of inflation of the fabric cylinder is 1 minute, the time of full ignition of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15-20 minutes. sec10) Climatic modification – U11) Category of placement – according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class R according to GOST 1767715) Illuminated area – up to 15000 m2.

Send Me Quotation

The function is avialable for logged in users only


Specification

Product value

0,14 м3

Product length

600 мм

Product width

450 мм

Product height

500 мм

Product SKU

ELG T5 400S 2,2GX