Foil slider F 01 – Gold

Instructions: Using nail polish sliders: 1. Prepare the nail plate, apply background varnish. 2. Cut the image to fit 3. Place the cut image on a wet cloth for 10-15 seconds. Separate the film from the backing by sliding it. 4. Apply the sticker to the nail, wipe off moisture with a dry cloth. Press down and smooth the decal. 5. Remove excess film with a file or primer. 6. Cover the slider with "SAVE SLIDE". 7. Cover with clear varnish or top in 2 coats. Nail polishes contain substances that dissolve the sticker, so apply the first layer gently in 1-2 strokes. Dry, apply a final coat Using the sliders sliders with gel polish (Shellac / Shellac and Gelish / Gelish): 1. Prepare the nail plate, apply a base coat, if needed a base coat. 2. Cut the image to fit 3. Place the cut image on a wet cloth for 10-15 seconds. Separate the film from the backing by sliding it. 4. Apply the base to the nail, then place the slider on the "wet" base. Press down and smooth the decal. 5. Dry in the lamp. 6. Remove excess film with a file or primer. To avoid detachment and if you are designing for the entire nail, leave a 1 mm indent from the free edge and cuticle area. 7. Apply a small layer of base, dry, apply topcoat. Or cover with a top in 2 layers Using acrylic sliders sliders: 1. Prepare the nail plate, complete the acrylic backing. 2. Cover your nails with liquid acrylic, gently stick the sticker on without waiting for it to dry. Acrylic dissolves the sticker, so you need to immediately apply the slider as accurately as possible. 3. Cover the slider with "SAVE SLIDE". 4. Cover the nail with an acrylic ball, being careful not to smudge. Those. Specification Decal paper, film 15 microns, individual polypropylene bag with the suspension.