Gas heating unit "Blue flame" (BPG)

Purpose of the gas heating unit (unit) The gas heating unit (unit) BPG (UPG) is designed to heat gas to a predetermined temperature, can be used in gas distribution and gas consumption systems to exclude hydrate formation during throttling, as well as to maintain the gas temperature at the outlet of the gas distribution station, BPPG and The operating conditions of the gas heating unit (unit) BPG (UPG) are intended for operation in macroclimatic regions with a temperate (U, N) and moderately cold climate (UHL, NF), as well as in areas with a cold climate (HL, F ). The climatic version of the BPG (UPG) is chosen depending on the construction area, in accordance with the requirements of GOST 15150-69. BPG (UPG) can be operated in areas with seismicity up to 9 points inclusive according to SNiP RK 2.03-30-2006. The design snow load (200kgf / m2) must comply with the requirements of the V territorial region, and the wind load (85kgf / m2) – the VII territorial region according to SNiP 2.01.07-85. The size of the gas heating unit (node) as part of gas distribution stations should be determined from the conditions ensuring the required gas temperature at the outlet of the gas distribution station, the normal operation of the station equipment and the exclusion of its icing. In the case of using a gas heating unit (unit) in the station circuit, it is necessary to take into account the additional heat load. Composition of BPG (UPG) Gas heating unit (block) The gas heating unit (block) is used to heat the gas to the set temperature. Heat exchangers with a U-shaped tube bundle made of stainless steel are used as heaters. Heating is carried out using an intermediate heat carrier. The heat exchanger is designed for the maximum inlet pressure. Protection against breakthrough of the tube bundle is carried out by safety shut-off valves. The unit is equipped with all necessary instrumentation and control devices (pressure, temperature sensors, tube bundle breakthrough alarms) in accordance with the customer's requirements. The gas heating unit can be placed both in the unit and on the frame under a canopy (in in the case of large dimensions of heat exchangers)