Indication modules ENMI

The main purpose of the ENMI indication modules is to display the parameters of the electrical network mode measured by the ENIP-2 transducers. ENMI connected to ENIP-2 performs the functions of a panel board. Thus, the identity of the readings of the panel instruments read at the facility by the operational personnel and the measurement values transmitted via telemechanics channels is ensured. 4 and ENMI-5 based on liquid crystal screens have extended functionality for displaying measured values in a variety of forms. ENMI-4 provides the following data display modes: digital forms, bargraphs, tabular forms, connection mnemonic diagram. ENMI-5 with updated screen forms facilitates perception and access to various information. In this modification, measurements can be displayed in the mode of simulating a pointer device, in digital form, in diagrams (vector diagram and power diagram). ENMI-5 provides control of discrete outputs ENIP-2, and can also serve as a panel for ENMV-1. ENMI and ENIP-2 can be structurally combined in cases when it is required to install ENIP-2 as a panel device. The combined construct is easily mounted into a prepared hole in the switchgear compartment door or on the control room panel. ENMI-6 display modules are used to display diagnostic data and monitor devices connected to the substation local network. On the basis of ENMI-6, any options for displaying technological information can be realized on request. Those. specifications Indicator type ENMI ‑ 3 LED three lines 4 characters each 20 × 11 mm (12 × 7 mm) ENMI ‑ 4 LCD 4.0 "monochrome FSTN, 240 × 128 dots ENMI ‑ 5, ENMI ‑ 6 LCD 4.3" color TFT with touch panel, 480 × 272 dots