Installations for the preparation of fuel, starting and impulse gas (UPTPIG)

UPTPIG are designed for operation in areas with a temperate (Y, N) and moderately cold climate (UHL, NF), as well as in areas with a cold climate (HL, F). The climatic version of the UPTPIG is chosen depending on the construction area, in accordance with the requirements of GOST 15150-69. UPTPIG can be operated in areas with seismicity up to 9 points inclusive according to SNiP RK 2.03-30-2006. The calculated snow load (200 kgf / m2) meets the requirements of the V territorial region, and the wind load (85 kgf / m2) corresponds to the VII territorial region according to SNiP 2.01.07–85. UPTPIG performs the following functions: cleaning the gas entering the installation from mechanical and liquid impurities; accounting for the gas flow passing through the installation; dehydration of the pulse gas; heating and maintaining the temperature of the fuel and starting gas in the automatic mode in the specified range; reduction and maintenance in the specified range in automatic mode of pressure of fuel, starting and impulse gas of gas turbine installations of gas pumping units, emergency power supplies, thermal neutralization of gas purification products and local consumers; measurement and control of parameters of the air environment, gas content of the installation shelter with the issuance of parameters to the automated workstation of the compressor shop dispatcher; automatic control of systems engineering support, fire alarm and access control to the shelter of the installation with the issuance of parameters to the AWP.