PS-2400P sampler

The principle of its operation is based on the linear intersection of the sample-cutting knives of the pulp flow, divided into two approximately equal parts. At the same time, samples from both knives are fed into a common storage tank. The sampler is installed on technological units (flotation machines, sump, receiving boxes, slurry dividers, etc.). The sampler consists of two main units: sampler 1 and receiving box 2. Design of the receiving box (overall dimensions, number and location of process pipeline inlets) can be modified in accordance with the requirements of a particular production. The sampler is manufactured in a corrosion-resistant design using polymeric materials with high abrasion and chemical resistance. The sampling knives are made of corrosion-resistant steel 12X18H10T. A highly reliable double-acting pneumatic cylinder is used as a drive in the sampler. The sampler is designed for safety and ease of use and maintenance. Those. specifications maximum capacity of the process stream, m3 / h …… ………. 2400maximum particle size of the solid fraction, mm …………. …….… … ……. 2.5 the content of the solid phase in the pulp,%, not more ……………………….. 40 temperature of the pulp, ° С ……………………………………………… …. from +5 to + 60 drive type ………………………………………………… ……… .. pneumatic knife slot width, mm .. …………………………… .. ……………… ……………… …… 8 length of the knife slot, mm, not less ……………………………… .. ………………. 580 knife movement speed (adjustable), m / s ……………………… ….. 0.1 – 1.0 compressed air pressure, MPa ………………………………………… …. from 0.3 to 0.6 overall dimensions with a receiving box (LxWxH), mm, .. …… …. 2450x2600x2150 mass with a receiving box, kg, no more …………………………… …………. 1400