PS-50PM sampler

The sampler is a device with a rotary pneumatic drive that moves a vertically falling process flow over a sample-cutting knife. In this case, a sample is taken while the flow is crossing the slot of the knife. The geometry of the cut-off part of the knife has the shape of a trapezoid, which ensures the proportionality of the slot width in relation to the distance from the axis of rotation, compliance with proportional sampling over the entire flow section and, accordingly, representative sampling. The sampler is installed on technological units (flotation machines, sump, receiving boxes, slurry separators, etc.). The rotary pneumatic double-acting actuator is used as a drive in the sampler. The sampler is made of corrosion-resistant materials with high abrasion and chemical resistance. The sampler is connected to the process pipeline with a flexible hose DN50. Those. specifications diameter of tested pipeline, mm … … …………………………………… ……….. up to 50 maximum capacity of the process stream, m3 / h … ………………. 8 the volume of the sample taken at one crossing, dm3, .. …………… ………….. 0.3- 0.6maximum particle size of the solid fraction, mm …………. …….… ……. …. 8 the content of the solid phase in the pulp,%, no more … …………… ……………………….. 40 temperature of the pulp, ° С … …………………………………………… ….. from +5 to + 60 drive type .. …………………………………… ………………… .. pneumatic angular rate of flow switching, rad / s …………………… ..… ……. 0.5-3.0 Removal of sample from sampling chamber ……… ………………… ..…. …… .. self-flowing compressed air pressure, MPa ……………………………………… …. from 0.3 to 0.6 overall dimensions without installation flange (LxWxH), mm …… … 245х335х765 Dimensions of the mounting flange, mm ……………………………………… … 420х235 Diameter of the outlet pipe, mm .. ……………………… …. …………… ….… ..… 50mass, kg, not more ………………………………………………………… .. ………. 12