Sampler PS-1200P

The sampler is installed on technological units (flotation machines, sump, receiving boxes, slurry dividers, etc.). The sampler consists of two main assemblies: a sampler 1 and a receiving box 2. The structure of the receiving box (overall dimensions, number and location of process pipelines inlets) can be modified in accordance with the requirements of a particular production. The sampler is manufactured in a corrosion-resistant design using polymeric materials with high abrasion and chemical resistance. The sample-cutting knife is made of corrosion-resistant steel 12X18H10T. A highly reliable double-acting rodless pneumatic cylinder is used as a drive in the sampler. The sampler is designed for safety and ease of use and maintenance. Those. specifications maximum capacity of the process stream, m3 / h …… ………. 1200maximum particle size of the solid fraction, mm …………. …….… … ……. 2.5 the content of the solid phase in the pulp,%, not more ……………………….. 40 temperature of the pulp, ° С ……………………………………………… …. from +5 to + 60 drive type ………………………………………………… ……… .. pneumatic knife slot width, mm .. …………………………… .. ……………… ……………… …… 8 length of the knife slot, mm, not less ……………………………… .. ……………… .. 580 knife movement speed (adjustable), m / s ……… ……………… ….. 0.1 – 1.0 compressed air pressure, MPa …………………………………… …. from 0.3 to 0.6 overall dimensions with a receiving box (LxWxH), mm, .. …… …. 2430x1900x2100 mass with a receiving box, kg, no more …………………………………. ……. 1200