Trailed disc harrow

1. The frame will last a long time and will not break – you will not have to spend time and money on repair and reinforcement of the frame, since for the production of the frame profile pipes with a section of 100×150 mm and a wall thickness of 6 mm are used, made not of "fence", but of machine-building steel. 2. Discs will last for a long time – you will not waste resources too frequent replacement of discs, as they take longer to be erased, because they are made of boron steel with a thickness of 6 mm, resistant to abrasion, and have a double sharpening, thanks to the wheel, the disc is self-sharpening when erased. 3. The post will not break or "sour" – you do not have to spend time and money on replacing the posts and knocking out the "soured" posts in order to adjust the angle of attack, because we install 58.5 mm reinforced posts that bend cold without changing the metal structure. The rack has a channel for lubrication and an oiler, and the bushing has a groove, while the rack can be lubricated, and the grease is retained between the bushing and the rack. 4. The cutting unit will not fail – you do not have to spend resources and time on repairing the cutting units, as they are reliable. The axle is made from a single piece of metal, not welded. The thread will not break – reinforced thread M27, instead of M24. The nut does not loosen – the washer does not deform due to the increased nut. The bearings do not break – they are not skewed, because the seats are ground in one pass with an accuracy of 25 thousandths of a mm. 5. The roller does not break and effectively compacts the soil – Get well-crushed and rolled soil, while maintaining moisture, since the roller is quite heavy – it is made of a steel square of 25×25 mm. The spiral is directed in two directions, so the weeds are scattered to the sides, and the roller does not clog. The bearings do not break because the loads are absorbed by the rubber expansion joints. 6. The soil is processed efficiently – no need to spend resources on re-cultivating the soil, since the first row is well deepened, thanks to the fastening of the drawbar to the frame through reducers, which shift the tractive forces downward. The adjusting screw allows optimal adjustment of the depth of the first rows. 7. The frame does not warp when transferred to the transport position – lateral loads on the frame are excluded, so it will last a long time and will not require your investment in its repair, since the chassis on a single frame evenly raise and lower the disc harrow. 8. Oil will not leak – you do not have to buy new oil, and repair hoses, since we use GOST hoses with a metal braid, and the fittings are crimped on German machines at the factory, and not in a "garage", which ensures its reliability. 9. The equipment will not stand idle – you will not have to wait long for the elimination of faults, and waste precious time during the cultivation of the soil, since we have our own warehouse, and any components will be sent on the same day. We also have organized a cash fund to provide warranty repairs, so a service team will be sent to you immediately. In 46 regions of Russia