Catalog

36,310 products in DB
ImageNameSummaryCategories
Escaler bedside table

The incredibly beautiful bedside table will bring a touch of originality to your bedroom. Has one drawer on door closers. The curbstone was exhibited in Milan in April 2018 as part of Milan Design Week. Installation is not required. Production time – 8-10 weeks. For bulk orders, write to [email protected] Tech. specifications Production: Russia, Moscow Material: MDF, veneer Dimensions: 50x60x45 cm (LxHxW) Available colors: oak, bleached oak, walnut, satin walnut, wenge, sapele, white with texture, black with texture

Plumbing, faucet, tap, bathroom faucet, sink faucet, basin mixer, bathtub mixer, shower mixer

Model MS1008, SPRING commercial stainless steel sink faucet,stainless steel sink faucet,stainless steel kitchen sink faucet,stainless steel sink black faucet

Welding Robot

The welding robot is an industrial robot engaged in welding, mainly includes robot and welding equipment. The robot consists of the robot body and the control cabinet (hardware and software). welding equipment for arc welding consists of the welding power, wire feeder, welding torch etc, for intelligent welding robot it should also have a sensing system, such as laser or camera sensors etc.

Additional contact with opening before the main contacts OptiSwitch D-4 (2NO + 2NC)
Road Marking Machine

道路标线机(道路标线机)是道路标线的专用设备。

用于高速公路,道路轴线,车道线,社区,机场等。标记各种具有反射性的热塑性或冷线,如直线,虚线,曲线,箭头和字母。

Acoustic diagnostic tester of gas shut-off valves of ground-based design: TA-4 "Iskatel-4"

Portable device TA-4 allows you to: – Eliminate gas losses through leaks in the gas valve gate – Extend the service life of gas taps up to several times eliminating the progressive erosional destruction of the gate seals at an early stage of the defect appearance – Estimate the volume of gas overflow through the leakage – Exclude cutting out working, but not adjusted for the ball valve (due to a special method of adjusting the final position of the ball valve, excluding the "under-closing" of the valve when a backlash appears between the actuator and the ball) -Saving expensive sealing pastes in the process of secondary sealing for the ball valve, with full control of the process efficiency

Acoustic diagnostic tester of gas valves: TA-3 "Seeker-2"

TA-3 devices allow you to: -Exclude gas losses -Extend the service life of gas taps up to several times (excluding one of the main reasons for failure of the valve – progressive erosional destruction of the gate seals) -Estimate the volume of gas losses (or gas overflow through leaks) -Exclude cutting out a serviceable, but not adjusted FOR (due to a special technique for adjusting the final position of the ball valve, excluding "under-closing" of the valve when a backlash appears between the actuator and the ball) -Saving expensive sealing pastes in the process of secondary sealing of the FOR, with full control of the process efficiency

Gas spark plug meter ISU-2

– quantitative measurement of the consumption volume of leaks through non-hermetic SZA; – certification of leaks, creation and maintenance of a database on the state of a specific SZA; and / or bypass valves (an unambiguous conclusion on the restoration of tightness or replacement of the ZA) – monitoring the tightness of the SZA after commissioning or repair and restoration work Tech. specifications Gas volumetric flow measurement range, m3 / min DN50 – DN125 0.00006 – 2 DN150 – DN400 0.00006 – 5 Relative error limits,% ± (3.7 + 0.000025 / Q *) Explosion protection – intrinsically safe electrical circuit: 1Ex ib IIA T4 Gb X Temperature range of the measured medium, С ° from -10 to +50 Weight, kg: – operator panel – 0.5 – small meter – 1.0 – large meter (without a dock seal) – 1.98 – the whole set in case – 31 Completeness:  operator panel ISU-2 – 1 pc small meter IM-100 – 1 pc large meter IB-400 – 1 pc power battery – 6 pcs charger (~ 220/4 , 2 ─ 12 / 4.2V) – 1 pc. Pump – 1 pc.  dock seals – 4 pcs. case – 1 pc.

Acoustic diagnostic complex ADK-1.1

– Determination of the presence of leaks through the shut-off element of the gas shut-off valve of any type and diameter during routine inspections, seasonal maintenance, technical diagnostics of the valve; – Digital display of the leak rate and a rough estimate of the volume of gas flow through the leak tightness of the valve of the tested valve; – Monitoring the effectiveness of the "packing process "Sealing paste in the gate of an unsealed tap; – Preventive maintenance and express diagnostics of ZA (without any dismantling) in operating mode; – Checking the tightness of the valve after starting-up and adjustment or repair and restoration work; – Excluding cases of cutting out a serviceable, but not adjusted by the valve, when the valve is "overclosed" or "not closed" due to wear of the drive elements; – Creation and maintenance of a database on the state of the diagnosed cranes.

Картина песком "Влюбленные" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Котик в шапочке" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Котик с зонтиком" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Лошади" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Орел" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Павлин" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Пейзаж" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Цветы" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Радужный пес" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Радужный слон" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Зебра" (Авентура) 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Радужный волк" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Радужный лев" 30*40 см.

В набор для творчества входят: трафарет 30*40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Радужный тигр" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Картина песком "Радужные еноты" 30*40 см.

В набор для творчества входят: трафарет 30х40 см., контейнеры с песком 19 цветов, образец, канцелярская иголка и инструкция.

Luxury Modern Sofa China

Bestar Hospitality is a top hospitality furniture manufacturer of custom hotel furniture in China offering a complete range of FF&E solutions,including casegoods,seating,vanities etc.

Bestar Hospitality specializes in manufacturing luxury modern furniture,including sofa,tables and cabinets for luxury homes,villas, clubs, restaurants, cafes,etc.

Swinging screen ERGA GK

The oscillating screen ERGA GK provides simultaneous screening of up to 5 fractions of material with a classification efficiency of up to 99%. TECHNOLOGICAL DESIGN ERGA GK screen is a sealed, dust-proof housing with replaceable sieves (up to 4 pcs) installed inside. During sieving, the entire sieve area is involved, which ensures high productivity of the equipment. CLASSIFICATION EFFICIENCY UP TO 99% Individual sieving mode is selected depending on the material and requirements for the final product. Optimal adjustment of the sieve angle, stroke amplitude and pulse frequency allow achieving up to 99% efficiency of the classification of the source material. OPERATION UP TO 24 HOURS PER DAY WITH MINIMUM MAINTENANCE Unpretentious, rocking screen ERGA GK works without complicated transmission mechanisms, lubrication and close attention from the personnel. The sieves are cleaned automatically, which eliminates their clogging and guarantees high-quality fractionation of raw materials with high productivity without downtime for maintenance. If it is necessary to replace the sieve, it is enough to unblock the eccentric clamps and remove the sieve.

Stainless steel wire rope mesh

Stainless steel cable mesh is light, robust, and transparent. High-quality stainless steel cables and pressed ferrules are used for the production of the mesh and connected to a load-bearing and flexible structure. The curvature in the opposite direction of the stainless steel cables creates the exceptionally robust characteristics of the mesh can even stand up to heavy loads.

Kashmiri Saffron

Organic Kashmiri mongra saffron

Purity guarantee

battery pack 2+4 connector 50A-80A Rated current bike charge connector

1.MATERIAL:

2.BODY:THERMOPLASTIC,UL94V-0.

3.CONTACT:COPPER ALLOY.

4.SPECIFICATIONS:

5.RATED CURRENT: POWER 20-70A AMP, SIGNAL 3AMP.

6.RATED VOLTAGE:500V DC.

 

pulse oximeter

Convenience

Compact appearance, more convenient to carry.A button to wake up, even the elderly can also be used simply.Two 1.5 V AAA batteries can be used continuously for more than 15 hours, more environmental protection and saving.

Customized Towel Rack

only take customization order.

Coconut charcoal shell

we are the best produsen of coconut charcoal shell in Indonesia.

Coconut product

we are the best produsen coconut product and derivatives,coconut charcoal shell,cocofiber,virgin coconut oil,and cocopeat blocks.

Café premium
pipe

pipe metal

VKOP-E-100 overturning cooking boiler with internal copper tank
Process filter, cell 0.35mm, with a lid on swivel wing bolts with mechanical seal, for sugar syrup, with milk ...

Process filter, mesh 0.35mm, with a cover on swivel wing bolts with mechanical seal, for sugar syrup, with DIN50 milk inlet and outlet nuts

Shea butter

Unrefined shea butter for use in the confectionery and cosmetics industries. We offer a high quality product made in Ghana at a competitive price. The products are already ready to ship. Get a quality product at a very affordable price.

Sheksna-86

The walls and partitions are made of laminated veneer lumber, the thickness of the outer wall is 240 mm. The unique i-log technology, combining the advantages of a real wooden house and warm frame structures, which resulted in an inexpensive cost and maximum price / quality ratio. Manufacturing of all house details and implementation of all preparatory work at the factory on imported equipment. Fast construction – installation within 2-3 weeks. The roof is made from farms 100% factory readiness Completely environmentally friendly building materials, northern forest of the Vologda and Arkhangelsk regions. The breathable structure of the walls allows the house to "breathe". Compliance all norms of energy saving. Possibility to choose color and texture options for solving facades. Possibility to choose a layout option.

Milk thistle seeds

Application: in medicine and cooking. Milk thistle is edible, it is used in dietary nutrition. In medicine, milk thistle oil squeezed from seeds, milk thistle meal, alcohol and water extracts of milk thistle, herbal tea based on milk thistle fruit, milk thistle syrup are used.

Engine decarbonization

De-coking the engine is the cleaning of the piston, piston rings and combustion chamber without disassembling the engine. It is produced independently or in a car service using a special liquid. De-coking helps to assess the real state of the cylinder-piston group and the engine's ability to restore compression. The de-coking of the engine is the cleaning of the piston, piston rings and combustion chamber without disassembling the engine. It is produced independently or in a car service using a special liquid. Decarbonization helps to assess the real state of the cylinder-piston group and the engine's ability to restore compression. When the engine decoking is necessary: when the engine power decreases with a loss of throttle response and deterioration of driving dynamics with an increase in fuel and oil consumption, if the car smokes, smokes and because of this difficulties arise with the passage of technical inspection if the engine does not start well if the car's mileage has exceeded 30 thousand kilometers if the engine vibrates and makes strange sounds if the engine was diagnosed with "overhaul" in a car service. Those. specifications A set of two preparations: engine decoking fluid and flushing of the oil system. Increases cleaning efficiency and promotes the most complete washout of deposits. Prepares the lubrication system for an oil change. The set is designed for cleaning standard engines with the following features: a motor volume of 1-2 liters; cylinders are vertically or slightly inclined; the piston crown does not have a deep recess, which must be filled with an additional amount of decoking liquid. Package contents: engine decoking liquid (185 ml) flushing the oil system (0.33 l) syringe tube engine compartment sticker instruction: part 1, part 2.

Fireproof metal doors
Fireproof metal doors
Lumber

We offer high-quality designer log houses and baths from the northern forest, cut down only in winter in the most remote and ecologically clean areas of the Komi Republic. The northern pine of the Komi Republic fully corresponds in quality to the Canadian pine, which is the quality standard in woodworking. The architectural bureau will offer you an author's project, created just for you. The diameter of the logs is from 35 cm. Canadian and Russian felling. Timber age – from 100 (one hundred) years. In addition, we offer high quality lumber, boreal forest, any size according to your specification. Length from 3 to 6 meters. Dry and planed lumber. GOST 8486-86, 26002-83-5. Export option. Volumes up to 1000 cubic meters. per month. For serious clients only. Payment terms – FSA warehouse in Syktyvkar. Sending by wagons, road transport. We organize acquaintance with the production at the conclusion of the contract. Interested in long-term cooperation oriented to export. Contacts tel. viber, whats app + 7-965-783-08-98 [email protected], [email protected]

Lumber

We offer high-quality designer log houses and baths from the northern forest, cut down only in winter in the most remote and ecologically clean areas of the Komi Republic. The northern pine of the Komi Republic fully corresponds in quality to the Canadian pine, which is the quality standard in woodworking. The architectural bureau will offer you an author's project, created just for you. The diameter of the logs is from 35 cm. Canadian and Russian felling. Timber age – from 100 (one hundred) years. In addition, we offer high quality lumber, boreal forest, any size according to your specification. Length from 3 to 6 meters. Dry and planed lumber. GOST 8486-86, 26002-83-5. Export option. Volumes up to 1000 cubic meters. per month. For serious clients only. Payment terms – FSA warehouse in Syktyvkar. Sending by wagons, road transport. We organize acquaintance with the production at the conclusion of the contract. Interested in long-term cooperation oriented to export. Contacts tel. viber, whats app + 7-965-783-08-98 [email protected], [email protected]

Sunflower oil

We are Russian company sell out russian sunflower oil from factory. We would like to offer to you the best sunflower oil made from seeds collected in the cleanest ecological regions of Russia.Our company website http://rusbiofood.com/ Mob. number (WhatssApp/ Viber/ WeChat) +7-(988)-553-07-63E-mail: [email protected]

Precision laser marking marker MiniMarker 2-C25

A compact laser machine performs special processing on the surface of all types of alloys, including precious metals (gold, platinum, titanium, etc.) without harm to the integrity of the surface of this material. MiniMarker laser machines are highly reliable (they have been operating in production for more than 12 years), have low power consumption, no need for consumables, provides high quality images, has the ability to color laser engraving of metals, has an extended warranty of 3 years. The customer's personnel undergo free short-term training.The MiniMarker 2-C25 laser machine is recommended for special marking, including marking of medical devices, aircraft engine parts (turbine blades, pipelines, etc.), end surfaces of precision bearings. Those. specifications laser emitter: Laser type: ytterbium cw fiber Laser resource: more than 100,000 hours Average laser output power: 25 W Laser wavelength: 1.064 μm Cooling: autonomous air software package: Type of output images: outline and raster, text and graphic, barcode

EM BACTERIA

Concentrate "Em-Eco" – is an analogue of the microbiological preparation "Vostok EM-1" approved for use in accordance with the sanitary-epidemiological conclusion No. 2116 77.01.03.929.P.10999.05.3. dated 06.05.2003, issued by the State Sanitary and Epidemiological Service of the Russian Federation, the Chief State Sanitary Doctor in Moscow. TU 9291-00152420326-2003. It is a complex of specially selected natural anaerobic and aerobic microorganisms of various types, adapted to local conditions and multiplied in the Kumitsky Reactor bioreactor: lactic acid, photosynthetic, nitrogen-fixing bacteria, yeast, actinomycetes, fungi and their metabolic products. Microorganisms are selected taking into account the requirements of the trophic chain and form a symbiotic complex. It is non-toxic in all respects, harmless to humans, animals and birds, side effects and complications are excluded. The preparation uses only natural beneficial microorganisms, which are classified under the general name "EM". APPLICATION OF "VOSTOK EM-1" IN PLANT GROWING (Table – among the images for the product.) Low-fertile soil or depleted soil of greenhouses is filled with organic matter (straw, leaf litter, peat, sawdust, pine bark, husk, etc.) and spilled with a solution ( 1: 100) at the rate of 2 liters per 1 square meter. Soil preparation in the fall, after harvesting, is carried out by irrigating the soil with a working solution (1: 100) with a nutrient medium (add a little something sweet to the solution: old jam, molasses, mashed potatoes from overripe spoiled sweet fruits, waste from a juicer, etc.), followed by surface cultivation of the soil with a hoe, flat cutter or "Strizh" cultivator. (The task is to lightly embed straw, stems and weeds into the soil to accelerate their decomposition and turn into humus. In spring, at temperatures above + 10 ° C, do the same 2 weeks before sowing or planting crops. solution (1: 1000), soaking lasts from 15 minutes to 2 hours (depending on the type of plant and seed size). Effective microorganisms of the drug suppress pathogens on the surface of the seeds, and also decompose the seed coat, accelerating water wetting and germination of the embryo. plants are sprayed with a solution (1: 1000) in order to prevent diseases. For the treatment of seedlings (watering and spraying), a solution (1: 2000) is used. Watering with a working solution is carried out no more than once a week. For root watering of plants, a solution is used (1: 1000) . Plants are watered no more than once a week. The rate of application is 2 liters per 1 square meter. Increasing the safety of root crops during storage: treat the storage room with a solution (1: 100), ventilate. Rinse root crops or spray with a solution (1: 200), dry thoroughly and store). For the preparation of compost, herbal infusions and warm beds, a working solution (1: 100) is used. Indoor plants are sprayed with a working solution (1: 1000). Plants develop faster and better, the number of flower stalks increases. Medical Use 1. For the treatment of fungal diseases of the feet with a solution in a concentration of 1: 100, the affected areas are moistened with a tampon for 10 minutes. Some people use the drug in its pure form, without diluting with water. 2. For the treatment of dysbiosis, take 1 teaspoon of the drug at night 1 time in 1-3 days or 1 tablespoon 1 time per week. As a result, the swelling is relieved, the skin becomes clean, the bowel function is normalized. 3. For the treatment of sinusitis, a solution of the EM drug 1: 100.4 is instilled into the nose. To eliminate inflammation on the skin of an allergic nature, the affected surface of the skin is moistened with a solution of EM-1 1: 100.5. For the treatment of angina and respiratory diseases at an early stage, gargle with undiluted Vostok EM-1 (at least 3 times a day), after the procedure do not eat or drink anything for 2 hours, drink 1 tablespoon of pure EM-preparation once at night .6. In case of poisoning, dilute 1-2 teaspoons of Vostok EM-1 in 100 ml of water and drink. Pain, nausea disappear in 10-15 minutes. 7. The Japanese treat liver diseases by giving patients from 10 to 100 ml of an EM preparation daily. get rid of smoke and pet odors. Chandelier. Spray with solution (1: 1000). The nicotine smell and dust will disappear. They get ticks. Spray with solution (1: 1000) until carpet is damp. It is noticed that after drying the carpets become lighter, cleaner. Curtains. Dust settles on them, they are saturated with smell. Spray with solution (1: 1000) Entrance foot mats. The unpleasant smell will disappear after applying the solution (1: 1000). Glass doors, windows, TV. Spray with a solution (1: 500), wipe, spray again after 10 minutes and wipe. After processing, they become much cleaner.Bed. Spray with solution (1: 1000) until damp. It has been noticed that the bed becomes lighter, and, in addition, it seems that the linen does not need to be washed and ironed. The tick that causes attacks of bronchial asthma disappears. Leather items. After processing, mold on leather things decreases and an unpleasant odor disappears. Fur and suede products, woolen coats, woolen products. Treat 1-2 times with a solution (1: 1000). The pile becomes shiny, and suede products do not shine, woolen coats are renewed. Wall above the slab and other surfaces: spray the solution (1: 200) twice with an interval of 10 minutes and wipe. Microwave: spray the solution inside (1: 500), wipe after 10 minutes. Cutting board: spray with solution (1: 500). Sprinkle the refrigerator with a solution (1: 500) periodically. Sink, wash. Pour the solution (1:10) and do not use them for 12 hours. There will be cleansing from fat deposits, mucus inside the siphons and pipes. Sprinkle the trash can with a solution (1: 500). The mucus and debris smell will disappear. Periodically keep in a solution (1: 200) for 2-3 hours. Knives do not rust and dull less. Bathroom, toilet. Spray the door and walls with a solution (1: 500) twice and wipe. Unpleasant odors disappear, feces are quickly processed and converted into fertilizers. A solution (1:10) with a nutrient medium (1 tablespoon per 1 liter of solution) is used. Repeat the treatment 2 times a month. Solution consumption – 1 liter per 1 cubic meter of feces. Treat the interior of the car with a solution (1: 1000). The amount of dust is significantly reduced.

ECOKLADIN BIOFERTILIZER

Preparations of the EKOKLADIN series are a mixture of tolerant microorganisms and cultures of associative fungi adapted for wide use in various soil and climatic zones of an organic carrier capable of maintaining productive health for a long time, the ability to rapidly multiply cellulosolytic properties. The fundamental difference of the preparation is the way microorganisms penetrate into the soil or soil. Fungi and bacteria get into different conditions with their shelter and stocks of products and can in the shortest time produce a large number of beneficial microorganisms that can fight pathogenic and opportunistic bacteria and fungi (fusarium, rust, root rot, etc.). Since microorganisms are protected by the organic base of the drug, the drug can be used both at a favorable time for working with biological products, and at other times, convenient for agricultural work. The drug can be applied by surface spraying, mixed with a variety of granular fertilizers, cereals, legumes, oilseeds, technical, vegetable crops during sowing or feeding. When planting root crops and onion crops, as well as during transplantation, treatment with "Ecocladin" promotes the rapid formation of a favorable environment in various substrates in the root space. straw bales, coconut, bamboo and other organic and inorganic substrates). The cellulosolytic properties of the preparation "Ecocladin" are due to the unique selection of symbiotic mushrooms that have a powerful potential for decomposition of crop residues embedded in the soil and stubble. In addition to breaking down organic residues, inhabited fungi heal the soil and create conditions for the restoration of agrobiocenosis (reproduction of earthworms, insects, etc.) and natural soil fertility. , vegetable, technical, etc.) and their assimilation of nutrients introduced by man and the involvement of plant absorption of substances from the decomposition of crop residues and green manure. Application of a dry preparation is possible with incorporation into the soil or without it. After application, add plenty of water. the bacterium wakes up only in a humid environment. The application rate of the drug is 0.1 kg. for 1 sq. 200 ml can be dissolved. dry matter in 10 liters. preferably non-chlorinated warm water, let it brew for 30-40 minutes. and process the root zone of plants. Watering is desirable in the evening, because bacteria do not like direct exposure to sunlight. "Ecocladin" Made from animal and bird waste (manure or poultry droppings) using a complex of microorganisms and is used for pre-sowing treatment of seeds, seedlings, root dressing as the main organic fertilizer of agricultural and indoor plants, gardening, as well as improving soil fertility. Ichemotroph autotrophs. The producer Azotobacter chroococcum belongs to the genus-aerobic free-living soil bacteria that fix nitrogen in the air and use it as a product of their vital activity. When they decompose in the soil, nutrients available to plants are formed. Depending on the soil and climatic conditions, the volume of nitrogen fixation can reach up to 45 kg and more per hectare. The development of bacteria A. Chroococcum in soil occurs in the range from + 5C to 45C, however, the optimal temperature of nitrogen fixation is in the range of 20C – 40C. In soil bacteria are able to use carbon compounds as a source of energy: mono- and disaccharides, which it oxidizes to carbon dioxide, as well as alcohols, salts of organic and even aromatic acids. is effective for all types of plants. When caring for tea plantations, agronomic techniques are used – this is pruning and rejuvenation of the bushes. The sawn top and trunk parts cover the near-stem part of the bush with a mulch layer, which is favorable conditions for the development of actinomycetes. Actinomycetes accelerate the processing of plant residues (fiber lignin and cutin), converting them into carbon, vitamins, growth stimulants, and also create an aerobic layer that retains moisture well in the soil. Ekocladina bacteria effectively develop in moist soils with the reaction of soil solution pH 4, 8-8, 0

Telescope "TOURIST 14"

The pankratic telescope "TOURIST 14x-50xx 60" is designed for observing distant objects at temperatures from -15 ° C to + 45 ° C. It can be used by tourists, hunters, athletes, and astronomy lovers. Those. specifications Technical characteristics Magnification range 14x – 50x Field of view, within deg320 '- 50' Exit pupil diameter mm4.3 – 1.2 Resolution limit for the entire magnification range p.5.5 Ocular refocusing range +5 to -5 Minimum observation distance At minimum magnification 10 At maximum magnification 70 Objective light diameter mm 60 Overall dimensions mm Ø 68.0 x 480 Massakg1.0

Evening luxury handmade dresses

We produce the special irreproducible knit fashions, equipped with of utterly novel kind of cloth/knit fastener. The fastener can lie not only through the straight line (like a zipper), but also through the lines of any crookedness. It is organic on every sorts of clothing. It is not a foreign thing on clothes being produced of the same material as knitcloth warp. The fastener has a decorative knit fixer (the stop). Unfastening is swift (almost lightning).

Evening luxury handmade dresses

We produce the special irreproducible knit fashions, equipped with of utterly novel kind of cloth/knit fastener. The fastener can lie not only through the straight line (like a zipper), but also through the lines of any crookedness. It is organic on every sorts of clothing. It is not a foreign thing on clothes being produced of the same material as knitcloth warp. The fastener has a decorative knit fixer (the stop). Unfastening is swift (almost lightning).

Evening luxury handmade dresses

We produce the special irreproducible knit fashions, equipped with of utterly novel kind of cloth/knit fastener. The fastener can lie not only through the straight line (like a zipper), but also through the lines of any crookedness. It is organic on every sorts of clothing. It is not a foreign thing on clothes being produced of the same material as knitcloth warp. The fastener has a decorative knit fixer (the stop). Unfastening is swift (almost lightning).

Lots of wax

A batch of NS wax is used as a method, paraffin wax for the production of candles, coincidence, and a saturation feather, for the production of high density fiberboard (due to the addition of moisture protection capabilities). production of candles, coincidence, and the saturation feather of high density fiberboard others

Prefabricated Goat / Rabbit Sandwich Panel Farm

ATTENTION! Any individual buildings from lightweight light metal structures to anywhere in Russia and the CIS from one plant, taking into account local building codes! PK Vesta is a small innovative European-style production facility that designs, manufactures and builds individual complete buildings from sandwich panels anywhere in the world! All clients are served on the basis of the revolutionary online platform WebSteel, available free of charge in the world 24/7. What is included in the building package: FREE PROJECTS: KM (metal structures), AR (architectural solutions) and KZh (reinforced concrete structures – foundation. We do only if geology) Are given in PDF format (electronic version) and 3 copies (paper version signed and stamped by the GUI) Also included are wiring diagrams of the frame with nodes and enclosing structures. Any other sections – on request Double-pitched type of roof, one span (without internal bearing columns, 100% free planning) Lightweight bearing structures, consisting of about 80% of galvanized cold-formed profiles (С350 steel, I class of zinc coating, 275g / sq.m .), including columns, trusses, purlins, connectors and column bases (C245) with diagonal braces and struts. This is excellent corrosion resistance for many years! Fencing structures: ROOF – sandwich panels (60mm sandwich panels, density 100 kg / m3, sheet thickness 0.5mm) and WALL (50mm sandwich panels, density 100 kg / m3, sheet thickness 0.5mm) All shaped and fasteners are included in the building package. Includes 2 empty gates 4.2×4.5 and one tape window opening (double-glazed windows, gates and doors are not supplied) and two large 4.8×4.8 On request – it is possible to create any other openings. PRICE = free. Colors: ROOF – Gray (RAL 7004), WALLS – light gray (RAl 9002), SHAPED ELEMENTS – Blue (RAL 5005) All free basic colors according to the RAL catalog: White (9003), Gray (7004), Blue (5005), White-Aluminum (9006), Beige (1014), Yellow (1018), Green (6002), Light Gray (9002), Brown (8017) PRICE = Free ONE YEAR WARRANTY (12 months) IMPORTANT ! The kit does not include: crane runways for crane girders, floor pouring, design and installation of engineering networks, foundation and installation work, crane rental, installation of gates, doors and windows. The following loads are taken into account: III snow (snow load – 150 kg / sq. m.) III wind (wind load – 52 kg / sq. m.) 6 points (seismic) Technological load – up to 20 kg / sq. m. IMPORTANT! Prices for buildings are approximate, excluding VAT and are subject to factory stock availability, material prices and funding points at a particular point in the season. Those. specifications The panels are fixed to the ADDITIONAL FRAME (purlins) with self-drilling galvanized self-tapping screws. Installation of panels is carried out horizontally from the basement to the eaves by inserting the panels into one another (into grooves). All sandwich panels have an attractive appearance and provide a high degree of thermal insulation of the building. The thermal conductivity coefficient of the wall sandwich panel (100mm from mineral wool) is 0.47 KW / sq.m. (or the equivalent of 640mm brickwork). The structural sandwich panel consists of profiled metal plates and heat-insulating filler, joined by means of glue. The lining of the sandwich panel is made of galvanized coiled steel (I class of galvanized steel – 275 g / sq.m. And 0.5 mm thick). pallets, 3) free loading on vehicles, 4) complete with sealant Lenta S-LB. The panel with a thickness of 40-250mm with a mineral wool filler has a fire safety certificate, a sanitary-epidemiological conclusion and a certificate of conformity. All panels with Z-Lock.

Massage brush 090001 black

The comb is made of high quality materials and has anti-static properties. The unique teeth not only gently comb all types of hair, both straight and curly, regardless of length, but are also ideal for combing wet hair without damaging it, guaranteeing painless and soft detangling.

Massage brush 090001 black

The comb is made of high quality materials and has anti-static properties. The unique teeth not only gently comb all types of hair, both straight and curly, regardless of length, but are also ideal for combing wet hair without damaging it, guaranteeing painless and soft detangling.

PET BOTTLES WASHING LINE
Washing unit Frictional (with the possibility of heating water)

The water can be used both hot and cold. Detergents can also be used for cleaning. The main working bodies of the unit are three centrifugal blowers with which it is equipped. Each centrifugal blower is actually a specially designed friction centrifuge. During the operation of centrifugal blowers, a number of physical processes take place in them, which simultaneously ensure the separation and removal of contaminants from the material being processed. At the inlet to the blowers, a significant uncharged pressure is created, which allows the material to be “sucked in” into its working area. Together with the material, working water is supplied to the inlet of the blower, which washes away impurities, coagulates them and gives them additional mass. The impeller of the supercharger and the walls of its perforated shell create the effect of friction and, in fact, "wipe" the dirt from the material. The high speed of rotation of the impeller creates significant centrifugal forces, due to which "rubbed off" and acquired an additional mass of pollution fly out together with water through the shell perforation, and the material, because has a particle size larger than the perforation hole, is transferred to the next centrifugal blower. To improve the efficiency of the equipment, its manufacturability, reduce the periods of stoppages for maintenance, the unit can be equipped with various additional equipment, such as a storage tank with the function of separating contaminants by density, an autonomous water purification system from mechanical and dissolved contaminants, and others. (The picture shows the friction washer unit in the maximum configuration. The final configuration of the supplied unit corresponds to the list of options selected by the Customer specified in the item "Optional equipment"). The unit can operate both in a flow-through mode (working water washes away impurities and is discharged outside the unit), and in a cyclic mode (working water washes away impurities and drains into a tank, from which it is again pumped into the unit). The flow-through mode is most useful when cleaning contaminants such as cement, sugar, flour, etc., which quickly turn water into a solution, syrup or paste and deprive it of its detergency. The use of a cyclic mode of operation of the Unit can be used when washing mechanical impurities or when equipping the unit with a water purification system. The material supplied to the unit must be pre-crushed. The particle size of film and filamentary materials should be no more than 40 mm on the largest side, and solid – no more than 25 mm. Both those and other particles must be at least 5-7 mm. Processing of PET waste, film and filamentary, solid thin-walled into secondary raw materials

Arenga Palm Sugar bulk 25kg
if compartment

Sliding wardrobes can be built-in or cabinet. Built-in wardrobes are located in existing niches and openings. Photo of built-in wardrobes. Sliding wardrobes are free-standing elements of the interior, the key word is cabinet, that is, their design provides for a body that is itself a supporting structure, the body allows this type of wardrobes not to be tied to openings and niches, but to exist independently. Examples of sliding wardrobes. A special case of cabinet wardrobes is corner wardrobes. The functionality of wardrobes is largely determined by the filling of the cabinet, i.e. the number and location of shelves, drawers and various furniture fittings (hangers, pull-out fittings, nets, baskets, etc.). the location of the internal elements of the wardrobe is determined by the poor filling, because the wardrobe can store various clothes, shoes, toys, books, as well as large household appliances and various household accessories (vacuum cleaner, iron, ironing board, dryers). In other words, a high-quality wardrobe can become a convenient, functional storage system. I would like to note that an inexpensive wardrobe may well become a worthy element of your interior, and these are not just words, we are ready to prove it in practice. The design of the front of the wardrobe is largely responsible for the aesthetic appearance in sliding wardrobes. It must be remembered that a sliding wardrobe usually takes up a significant part of the space in the interior due to its size, so it makes sense to pay attention to the appearance of the sliding wardrobe facade. The main element of the facade is the doors of the sliding wardrobe, there are many options for the execution of compartment doors: L chipboard, mirrors, glass, plastic, etc. Undoubtedly, the price of a sliding wardrobe is made up of many factors, we suggest you choose the best option for price and design using a sliding wardrobe calculator. Wardrobes can be built-in or freestanding. Built-in wardrobes are located in existing niches and openings. Photos of recessed wardrobes. Freestanding wardrobes are free-standing elements of the interior, the key word corpus, that is, their design includes a housing which is self-supporting structure, the body allows this type of cabinets are attached to the openings and niches, and to exist alone … Examples of basic wardrobes. A special case of the hull is the corner cabinets cabinets coupe. The functionality of the wardrobes is largely determined by the filling Cabinet, ie the number and location of shelves, drawers and various furniture accessories (racks, pull-out accessories, nets, baskets , etc.). The number and location of internal elements of the wardrobe determines the future of content, because in the wardrobe can be stored as different clothes, shoes, toys, books, large appliances, and various household utensils (vacuum cleaner, iron , Ironing Board, dryer). In other words quality closet can become a convenient, functional storage system. I would like to note, that cheap wardrobe may become a worthy part of your interior, and it's not just words we are ready in fact to prove it. The aesthetic appearance of the cupboards is largely the responsibility of the design of the facade Cabinet compartment … You need to remember that the wardrobe usually takes a significant amount of space in the interior due to its size, so it makes sense to pay attention to the appearance of the facade Cabinet compartment. The main element of the facade is the door of the wardrobe, there are many variants of doors-compartments: L particleboard, mirror, glass, plastic, etc. Cabinet Door coupe can emphasize the individuality, it is possible to use the copy machine, sandblasting designs, elements from the skin, etc.Of course the price of the wardrobe is composed of many factors, we suggest you to select the best option for the price and design, using a calculator sliding door wardrobes.

Bar Chair
Bar Chair

Solid mahogany bar stool, ideal for bar counters and breakfast tables. Those. Specification Solid mahogany legs and solid mahogany seat

Bar Chair

Solid mahogany bar stool, ideal for bar counters and breakfast tables. Those. Specification Solid mahogany legs and solid mahogany seat

Bar Chair

Solid mahogany bar stool, ideal for bar counters and breakfast tables. Those. Specification Solid mahogany legs and solid mahogany seat

Bar Chair

Solid mahogany bar stool, ideal for bar counters and breakfast tables. Those. specifications Fully solid mahogany bar stool with backrest.

GIRL INSULATED WIND JACKET

upper fabric: raincoat polyester 100% polyester, lining viscose 100% viscose, insulation 150 g / m2 (from +13 to +5), on the right side of the front there is a decorative element – bow, without a collar, from the waistline, transverse tiered ruffles, length up to thigh lines, center zipper, wholesale and retail of children's clothing

Pickup, Pick up, Ceiling, Visors, ads

Super Strong Solutions

Charging and rectifying devices of the VAZP-MT series

The VAZP-M series charging and recharging rectifier unit is designed: 1) for charging serviced and low-maintenance lead-acid storage batteries and sealed lead-acid storage batteries with gas recombination; 2) for keeping AB in trickle charge mode; 3) parallel operation with battery for the load; 4) to power the load when the battery is disconnected; 5) for installation in DC switchboards. The VAZP-M series charging and recharging rectifier unit is intended: 1) for charging serviced and low-maintenance lead-acid batteries and sealed lead-acid storage batteries with gas recombination; 2) for keeping the battery in constant trickle charge mode; 3) parallel operation with the battery for the load; 4) for powering the load when the battery is disconnected; 5) for installation in DC switchboards. "Operating according to the IU-characteristic, provides power to consumers and at the same time charges the battery. power supply of consumers for a specified time, after the recovery of the voltage in the supply network, the rectifier unit switches to the battery charging mode while simultaneously feeding the consumers. Advantages: • Automatic two-level charge for all types of batteries; • Manual equalizing charge for battery maintenance; • Output voltage adapted to battery, output voltage stabilization is not worse than ± 0.5% • Battery capacity test Tech. specifications Main performance characteristics: Input voltage (V) 220/380 Input voltage deviation (%) ± 15 Frequency (Hz) 47-63 Output voltage (V) 110, 220 Maximum output current (A) 400 or more Voltage regulation (%) ± 0.5 50-100% load (%) 93 Operating temperature (о C) from 0 to 40 Model range "VAZP-M" No. Type Maximum output current, A Rated output voltage, V Overall dimensions, no more than, mm No. Type Maximum output current, A Rated output voltage, V Overall dimensions, no more, mm Weight, no more than, kg 1VAZP-MT 25.1102VAZP-MT 40.1103VAZP-MT 60.1104VAZP-MT 80.1105VAZP-MT 100.1106VAZP-MT 150.1107VAZP-MT 200.1108.2VAZP-MT20.2 MT 60.22011 VAZP-MT 80.22012 VAZP-MT 100.22013 VAZP-MT 150.22014 VAZP-MT 200.22015 VAZP-MT 300.22016 VAZP-MT 400.220172 x VAZP-MT 25.220 182 x VAZP-MT 40.220192 x 60.220P-MT.2

Hass Avocado

Hass avocado is the most popular avocado in Kenya and is native to Guatemala. One of the most salient features is that it turns dark purple when ripe. Samson Society's fresh avocado is grown under the equator of the sun on the green slopes of the mountain. Kenya.

Avocado Pinkerton

Pinkerton was born in 1961 and soon became known for its consistent, high yields. Pinkerton avocados are elongated pear-shaped with green, slightly pebbled, medium thickness, and easy-to-rind.

Avocado Fuerte

Fuerte is a variety known for its green smooth skin and is produced most of the year.

Boiler equipment: steam boilers, hot water boilers, boiler plants

LLC MPVF "Energetik" is a boiler plant, which is a highly specialized company that develops, manufactures and sells a wide range of products that are of high quality production. Reasonable price of the manufactured equipment, its highest quality, as well as convenient and effective warranty and service are the main secrets of the plant's success. Those. specifications LLC "Monastyrischenskaya Production and Implementation Firm" Energetik "is a modern Ukrainian plant of industrial steam boilers with a steam capacity of 0.4-25 t / h and hot water boilers with a capacity of 0.25-180 MW, modular boiler plants TKU and BMVKU, as well as a wide range of auxiliary boiler equipment. LLC "MPVF" Energetik "was founded on November 15, 2000 in the town of Monastyryshche, Cherkasy region. The first products of the plant were boilers of the E1.0–0.9 series. Today the enterprise produces more than 400 types of boiler equipment of various capacities. On the territory of the plant there are 7 workshops with a total area of over 12,000 m². The total number of technological equipment is 274 units, including unique ones. The production employs 264 employees, of which 70 are engineering and technical personnel. For 16 years of work, the company has implemented more than 1000 successful projects. Scientific and technical potential Development and implementation of non-standard equipment into production is carried out under the leadership of the Kiev Engineering Center, which is part of the structure of the enterprise. The division is engaged in the improvement of existing units and products, develops design documentation for customer requirements, performs thermal, aerodynamic, hydraulic calculations and strength calculations, consults clients. labor productivity and product quality. High-precision cutting of metal is carried out using a plasma cutting machine Vanad (Czech Republic). Longitudinal and circumferential seams of steam boiler drums and tank shells are made by the method of double-sided automatic submerged-arc welding on ESAB equipment (Sweden). An innovative welding complex makes it possible to weld shells and drums of boilers up to 12,000 mm in length and up to 3,200 mm in diameter. Plant "MPVF" Energetik "produces a full range of elements and components required for maintenance and repair of boiler equipment. The location of production in the central part of Ukraine allows the supply of spare parts in the shortest possible time, reducing the duration of downtime. Competitive price, high quality equipment, efficient service are the main factors for the success of the Energetik plant on the way to achieving leadership positions among Ukrainian manufacturers of boiler equipment.

ANTISTRESSANT

"TERRA 7" is a liquid concentrate of humic and fulvic acids, with chelating properties, macro- microelements. The content of humic acids is not less than 70 g / l. For pre-sowing treatment of seeds, root and foliar feeding of plants at all stages of the growing season. Growth stimulator, bioactivator of soil biota, increases the efficiency of mineral fertilizers, antidote, antistressant, detoxifier of contaminated soils, an agent that increases plant resistance to adverse environmental factors. Consumption from 0.1-0.2 liters per 1 ton / hectare. * * "TERRA" FEED – immunomodulator, growth stimulator, adsorbent. To increase daily weight gain, milk yield, increase the safety of livestock, reduce the feed conversion rate and, in general, increase the productivity of cattle and small ruminants, pigs and poultry. We offer you ANTISTRESSANT "TERRA 7", the effectiveness of which has been repeatedly confirmed empirically. Why you should give preference to "TERRA 7": 1. This is a highly effective safe stimulant for plants that does not change the crop production technology you use, on the contrary, it helps to achieve the desired results, subject to the application regulations, reducing uncontrolled risks, without polluting the soil and the crop itself with harmful chemicals substances. 2. LOW COST OF PROCESSING! NEEDED ONLY 100 liters per 1000 ha. Increases resistance to various diseases, the ability to better assimilate fertilizers. 4. The immunity of the plant is increased. Reduces the toxic effect on the plant when applied. 5. "TERRA 7" promotes more abundant flowering, shorter ripening times, as well as an increase in green mass. 6. Contributes to the improvement of soil fertility. 7.Improves the structure of the soil, activates beneficial microflora, and also binds and removes radionuclides, heavy metals and other soil pollutants.This is exactly the biostimulant that ideally fits the concept of organic farming, helping to grow and get an environmentally friendly crop and achieve high economic efficiency at the same time. One of the most valuable properties of "TERRA 7" is its ability to transform soil nutrients from useless and difficult to access plants easily absorbed by the root system. "TERRA 7" – contains salts of humic and fulvic acids, a universally balanced complex of minerals, micro- and macronutrients, namely total nitrogen; total phosphorus, total potassium, – copper; – manganese; – zinc; – iron; – common boron; – total cobalt; – total manganese; – total molybdenum, amino acids. We guarantee you the expected result, or we will return the money spent on the purchase. Leonardites are prehistoric organic sediments, more than 70 million years old, characterized by a high content of humic acids. The process of formation of leonardite is not complicated, but very long: plants in the process of life took carbon dioxide from the atmosphere and used solar energy to form biomass. From dead plants, the carbon contained in their bodies returned to the natural environment. During millions of years of this cycle, organic matter accumulated in large quantities and compressed under pressure, forming deposits in the earth's crust in the form of layers. Leonardite is organic deposits that have not yet turned into coal and differ from it in a higher oxidation state, high moisture content and organic matter, and therefore of no value as a fuel.

Cauliflower salad
Cauliflower salad
Saury.
spaghetti
HERE

Basic complete set of the seat: Seat width 410mm, 430mm, 450mm; Fabric upholstery; Additional options: • Frame; • Stand; • Armrest; • Handle • 2-point seat belt; • 3-point seat belt; • Backrest tilt mechanism; • Mechanism of extension into the passage; • Facing of the back; • Facing of the cushion; • Facing of the side; • Table; • Mesh; • Upholstery material as agreed with the customer.

HERE

Basic complete set of the seat: Seat width 410mm, 430mm, 450mm; Fabric upholstery; Additional options: • Frame; • Stand; • Armrest; • Handle • 2-point seat belt; • 3-point seat belt; • Backrest tilt mechanism; • Mechanism of extension into the passage; • Facing of the back; • Facing of the cushion; • Facing of the side; • Table; • Mesh; • Upholstery material as agreed with the customer.

HERE

Basic complete set of the seat: Seat width 410mm, 430mm, 450mm; Fabric upholstery; Additional options: • Frame; • Stand; • Armrest; • Handle • 2-point seat belt; • 3-point seat belt; • Backrest tilt mechanism; • Mechanism of extension into the passage; • Facing of the back; • Facing of the cushion; • Facing of the side; • Table; • Mesh; • Upholstery material as agreed with the customer.

HERE

Basic complete set of the seat: Seat width 410mm, 430mm, 450mm; Fabric upholstery; Additional options: • Frame; • Stand; • Armrest; • Handle • 2-point seat belt; • 3-point seat belt; • Backrest tilt mechanism; • Mechanism of extension into the passage; • Facing of the back; • Facing of the cushion; • Facing of the side; • Table; • Mesh; • Upholstery material as agreed with the customer.

Business and Project Loans/Financing Available

Are you tired seeking a Startup Loan to finance your Business, Project? Or even to expand your business? Do you need money for inventory, cash flow, expansion or advertising? Do you want to start a business and have no or low capital? Do you need refinancing? Want to avoid a lengthy loan process with hidden fees and no guarantee of approval? we are offering all types of loan from Personal loans, debt consolidation loans, business loans, real estate loans, Energy, Oil and Gas, Pharmaceuticals, Biotechnology, Emerging markets, Aviation, High-technology, communications, software working capital to small and large-scale businesses, etc. with an unbeatable unique interest rate of 3%., friendly, and processes are very swift and time sensitive! *We are open to all. If interested, kindly Reply to us via email at, info.nepolos.prosperity@gmail.com Terms and Conditions apply

Wheat flour of the highest grade

We offer premium flour (GOST, TU) wholesale from the manufacturer of the Omsk Melnik company under the SibColoss brand. Delivery anywhere in the world. Payment by installments, discounts. We work with and without VAT. Small, medium and large wholesale. Own production.

Wheat flour of the first grade

We offer flour of the 1st grade (GOST, TU) wholesale from the manufacturer of the Omsk Melnik company under the SibColoss brand. Worldwide delivery. Payment by installments, discounts. We work with and without VAT. Small, medium and large wholesale. Own production.

Wheat 3,4,5 class

We offer wheat grade 3, grade 4, grade 5. Large volumes. Bulk or big bags, shipment from the terminal, there is a railway dead end. Export is possible. We will arrange delivery!

White Beans

Beans also contain iron, magnesium, phosphorus and potassium Tech. specifications We can offer this product in bags. White beans 100kg (70 / modules * 565 cups. We can deliver this product within two weeks after ordering

Sorbent for the removal of oil products SORBITEX

Highly efficient sorbent for the removal of SORBITEX oil products. An environmentally friendly solution for spills of petroleum products: gasoline, oil, oils and other types from hard surfaces. Laureate of the 100 best goods of Russia award. Those. specifications Mineral sorbent of petroleum products, multiple use is possible, fraction 0.0-1.0 mm.

Sorbent for clarification and purification of oil products RE-NEW

Sorbent for cleaning and clarifying petroleum products. It is used in installations for the regeneration of petroleum products based on the principle of vacuum or pressure through a sorbent. Consumption: 1 ton of sorbent for 27-30 tons of oil product. The sorbent has proven itself well in the purification of diesel and heating oil, industrial oils, stable gas condensate, gasoline, and kerosene. Those. specifications Sorbent for cleaning and clarification of oil products "RE-NEW" (f. 0.0-0.2; 0.2-0.4; 0.5-1.0; 0.0-1.0)

Sorbent for reclamation of contaminated land REMEDIAT

Highly effective sorbent for remediation of contaminated land Remediat. Environmentally friendly solutions for eliminating the consequences of land pollution with oil products after spills of gasoline, oil, oils and other types of oil products. Biodegradable. Restores the natural properties of the soil.

Electrochemical machine

Electrochemical precision automatic copy-broaching machine model SFE-5000M with an industrial station Advantech, has the ability to process parts with a total total area of up to 40 cm2. materials with a conductive coating applied to them (example by electroplating). Those. specifications The maximum area of the simultaneously processed surface and the end part of the workpiece (stamp) is up to 40 cm2

Universal Lathe ST16k20 Series

The machines are modern versions of 16k20 and 16k25 machines and can be used in various industries for various machining operations and various materials: outer and inner diameter of processing; external, internal, metric, inch, modular, worm tapping; drilling, boring. The strong structure of the casting of the bed and its precision hardened-ground zippers provide professionals in the processing, stable and reliable performance. Due to the high precision: shafts, bearings, drive shaft housing and set, the machine is particularly rigid. This allows heavy-duty handling to take full advantage of the engine's power. The machines are manufactured using advanced technology, easy to operate and to maintain accuracy over a long period of time. Hardened and precision ground worm gear main spindle to improve productivity; ensure quiet operation and long service life of the machine and smooth gear shifting. Metallurgy factories, shops, repairs and large plants

Rail wagon scales for weighing in motion VRT-200-2

Installation is carried out on operated rails in the space between sleepers, without stopping the movement for several hours. Fast installation while maintaining the integrity of the track superstructure, unpretentious maintenance, modern multifunctional software, autonomy, low cost – qualities that make "VRT-200-2" a reliable, profitable assistant at enterprises of various industries, agriculture and transport. Advantages of VRT-200-2. – The scales are installed on the operated rails in the space between sleepers, without stopping the movement for several hours. Dismantling and reworking of rails during installation is not required. – Weighing is carried out around the clock, without the participation of an operator. – During the weighing process, the side numbers of cars are photographed with the function of their recognition. – The ability to install on an inclined surface, while maintaining metrological characteristics. – Diagnostics of each sensor allows you to control technical condition of the measurement system. – Remote technical support via the Internet. The software performs a number of service functions: – detection of wagons with an imbalance in loading on the sides and rails, with overload by the total weight; – registration and archiving of weighing results; – recognition and weighing of locomotives ; – formation of compositions.

nitrile gloves

Gloves, standard cuff at least 240 mm, Material: nitrile without powder Sterilization: nitrile medical gloves (EN 455 certified) for excellent tactile sensitivity, durability and strength. Cuff, powder free, double Packing: Box of 100 gloves, Box of 10 boxes CE and FDA certifications. Those. specifications Technical parameters and functionality of the systems supplied by us meet or exceed the best international standards. The minimum factor set by the European quality standard is 1.5.

mask 3M 1860

Protective medical mask (respirator) 3M 1860 is used for respiratory protection of professional medical personnel and to protect against pathogenic microbial particles (such as viruses, bacteria, fungi, anthrax, etc.) Original 3M masks / respirators. Production is carried out at the official factories of the American company 3M. Those. specification 3m 1860 (original certificate) Multi-layer protection of the filter structure Comfortable and breathable Good protective effect Good air permeability Elastic attachment Soft liner Disposable mask

Macadamia nuts

We are able and ready to supply as follows: Product: Macadamia Kernels Grade (Kenya) Number of Samples: 1-5 Containers Monthly Volume Available: 3 Containers Packing: 1,230 cartons X 11.34 kg container x 20ft refrigerated (13.9 m) Inspection: SGS or whatever you prefer, or has contracts with Price: USD as per attached schedule below Prices Style 0 – $ 18.45 Style 1L – $ 17.49 Style 2 – US 17.00 Style 1C – US $ 17.00 Style 4L – US 17.00 Style and 4S – 15.45 dollars Style 5 – 13.27 dollars Style 6 – 13.04 dollars Incoterms: FOB or CIF to the port Form of payment: transferable, confirmed letter of credit or cash against documents Tech. specifications Size Style 1 2 Type 0 (whole kernels) at least 95% total kernel with the remaining 5% in pieces, of which no more than 1% will pass through a 6.25 mm (¼ in.) square hole. Style is me (whole kernels) at least all 90% of the kernel, and the remaining 10% are pieces, of which no more than 1% will pass through a 6.25 mm (¼ inch) square hole. Style II (whole and halves) less than 50% of the kernel, and the remaining 50% in pieces, of which no more than 2% will pass through a 7.8 mm (5/16 inch) square hole. Gauge III (cocktail) At least 90% half or more kernels, including at least 15% whole kernels, and the remainder in pieces, of which no more than 2% will pass through a 6.25 mm (¼ ”) square hole. Size IV (halves and pieces) At least 50% half of the kernels and the remainder in pieces, of which no more than 5% is more than half of the kernels. Style V (Large Cubes) Units that are smaller than half kernels but no more than 5% will pass through 7.8 mm x 25 mm (1/5 "X 3/32") and no more than 2% will pass through 2.34 mm (3/32 in.) Square hole. V style (chips) Units that are smaller than half kernels, but no more than 5% will pass through 7.8 mm x 25 mm (1/5 "X 3/32") and no more than 2% will pass through 2.34 mm ( 3/32 inch hole). Gauge VII (small pieces) Minimum all 90% of the kernel, and the remaining 10% in pieces, of which no more than 1% will pass through a 6.25 mm square hole. Gauge VIII (Penalties) There will be pieces of broken, crushed, or shredded kernels of such a size that all will pass completely through a 6.25 mm (¼ ") square hole, and most will also pass through a 2.34 mm (3/32") square hole. hole.

Ladle
Towel dryer

TECHNICAL CHARACTERISTICS: Width: 400 mm Height: 1130 mm Center distance: 100 mm Heat transfer: 575 W Number of bars: 20 Grouping: 8-4-4-4 Connection type: Bottom Technology: contact-relief (IRON Connect) Product series: Premium Form: ladder Mayevsky wall plugs product passport

Towel dryer

TECHNICAL CHARACTERISTICS: Width: 400 mm Height: 1130 mm Center distance: 100 mm Heat transfer: 575 W Number of bars: 20 Grouping: 8-4-4-4 Connection type: Bottom Technology: contact-relief (IRON Connect) Product series: Premium Form: ladder Mayevsky wall plugs product passport

CRANBERRY JUICE 27% ready to drink
Demi-season coat
Screw-cutting lathe 165
Ulevolokno
Ulevolokno
Ulevolokno_copy
Ulevolokno
Ulevolokno
Ulevolokno_copy
Wheel excavator UMG E140W

The UMG E140W wheeled excavator is designed for small and medium-sized excavation work in urban environments. It is used on various construction sites and in large construction projects. The main quality is mobility when moving between work sites. The wheeled excavator does not interfere with transport. It can move quickly between dense structures and buildings. The wheeled excavator has increased maneuverability and movement speed compared to tracked vehicles. The main working tool is a bucket. The excavator can be equipped with various attachments. This will expand the scope of the excavator and increase its productivity. The difference from competitors is reliability, simplicity of design, simple maintenance, and reasonable price. Those. specifications Maximum digging depth, mm 4950-5940 Bucket capacity according to SAE, cu. m 0.32-0.8 Operating weight, t 13.2 / 13.4 / 13.6 Engine Deutz BF 4M 2012 Power, kW (hp) 67 (90) Stick, mm 2000/2310/2800 Voltage, V 12 Carraro axles (Italy) Bosch Rexroth hydraulics Maximum digging depth, mm 4945-5805 Length, mm 8050 Width, mm 2500 Height for working equipment, mm 3110-3755 For cab, mm 3062

Dezitall C-01 Long-term antimicrobial surface protection

The technology is based on the principle of creating a polymer antimicrobial layer with a prolonged effect on the surface. Due to the unique properties of the coating, instant destruction of microorganisms, both already present on the surface, and falling on it during operation after application is guaranteed. The coating "DEZITOL S-01" can be applied using a brush, roller, standard aerosol can or spray gun. During the operation of the Coating, short-term contact with water is allowed. "DESITOL S-01" is used to obtain a prophylactic protective antimicrobial layer of long-term action on various surfaces: – in residential buildings; – in industrial premises (warehouses, offices, etc.); – in medical preventive organizations and institutions of various profiles; – in children's institutions (schools, preschool institutions and others); – for objects of social importance; – for public utilities; – for catering and trade; – for other facilities where antibacterial treatment. One package contains 5 canisters, 1 liter each Tech. specifications An innovative composition, representing a nano-sized active matrix, provides a slow long-term release of active substances that have an antimicrobial effect on treated surfaces for up to 12 months. Wide spectrum of activity • Almost invisible after drying, does not spoil or change the appearance of the treated surface • Possibility of applying to hard-to-reach places • Possibility of wet cleaning

protective rubber pneumatic

Shows NVK-3-Dimensions 2000×3600 mass – 800 kg, Internal Pressure – 80-100 MPa pressure perceived below 50% compression – 1100 kN beat water – up to 7 balls ambient temperature from -40 C to +45 C minimum age from 7 years Tech. specifications Shows NVK-3-Dimensions 2000×3600 mass – 800 kg, Internal Pressure – 80-100 MPa pressure, perceived below 50% compression – 1100 kN beat water – up to 7 balls ambient temperature from -40 C to +45 C minimum age from 7 years

Tires rubber mudguards
Additive to lubricants - anti-wear nanomodifier "Striboil" _copy

Antiwear nanomodifier "Striboil" – a product of nanotechnology, significantly reduces mechanical friction losses and increases the period of equipment uptime, extends the life of lubricants and fine filters, has antioxidant and detergent properties. This makes it possible to reduce the use of traditional oils and additives, and, accordingly, reduce the cost of the lubricant. Processing with a nanomodifier does not require stopping the equipment and is carried out in the normal operation mode. It is important that the application of the nanomodifier does not require high qualification of the service personnel. Antiwear nanomodifier is used to service various types of equipment: – cars, trucks, tractors, truck cranes; – tractors, combines, other agricultural machinery; – excavators, graders, bulldozers, dump trucks, drilling equipment; – lifts, cranes, other loading equipment; – locomotives, wagons, electric trains; – container ships, tankers, bulk carriers, dry cargo ships, cruise liners, tugs; Can be used wherever there are mechanical friction units: – diesel and gasoline engines; – gas and steam turbines; – electric motors and generators; – pumps , compressors, blowers; – hydraulic equipment; – other mechanisms;

Additive to lubricants - antiwear nanomodifier "Striboil"

Antiwear nanomodifier "Striboil" – a product of nanotechnology, significantly reduces mechanical friction losses and increases the period of equipment uptime, extends the life of lubricants and fine filters, has antioxidant and detergent properties. This makes it possible to reduce the use of traditional oils and additives, and, accordingly, reduce the cost of the lubricant. Processing with a nanomodifier does not require stopping the equipment and is carried out in the normal operation mode. It is important that the application of the nanomodifier does not require high qualification of the service personnel. Antiwear nanomodifier is used to service various types of equipment: – cars, trucks, tractors, truck cranes; – tractors, combines, other agricultural machinery; – excavators, graders, bulldozers, dump trucks, drilling equipment; – lifts, cranes, other loading equipment; – locomotives, wagons, electric trains; – container ships, tankers, bulk carriers, dry cargo ships, cruise liners, tugs; Can be used wherever there are mechanical friction units: – diesel and gasoline engines; – gas and steam turbines; – electric motors and generators; – pumps , compressors, blowers; – hydraulic equipment; – other mechanisms;

Analysis of the export market of goods

The analysis of the export market of goods is carried out on the basis of the current data of customs statistics. The structure of the report on the analysis of export sales: – Analytical information on the state of the foreign trade market (its volumes, the main participating companies and their shares). – The list of Russian exporters (volumes, market shares); – List of manufacturing companies (volumes, market shares); – List of Russian regions – suppliers (volumes, market shares); – List of foreign companies – buyers (volumes, market shares); – Analytical table of buyers' preferences (manufacturer, exporter, recipient goods, address, country, description of goods, TN VED code, contract price, volume, delivery date, currency, etc.); – Dynamics of deliveries in monetary terms (USD); – Dynamics of deliveries in kind; – Decoding of delivery terms Incoterms. —– Analysis of the export market helps companies: – To identify the most demanded assortment by article / model; – To determine the market size and shares of the main participants with an accuracy 1 $ according to the description of the goods / HS code; – Calculate the best partner and the optimal price from the total volume of goods supplies; – Monitor the actions of each competitor on the market .—– The price for research is set depending on the number of supplies in the commodity market. To clarify the cost of analyzing the export market for your goods, contact the manager.

Strong Avocado
Fire detector IP-212-3SU

Fire detector IP-212-3SU (RP21) 2008. Differential pressure gauge DMEU-MI 400 / 5-0 2010, new from storage sale.www.dzmd.ru

DMEU-MI differential pressure gauge

Differential pressure gauge DMEU-MI 400 / 5-0 2010 , from storage new, sale and delivery Tech. Specifications Pressure transducers are designed to convert into a unified current signal: – Differential pressures of liquid and gaseous media, as well as steam; – the pressure difference between liquid and gaseous media, as well as steam; – liquid level; – consumption of liquid and gaseous media, as well as steam. The devices are designed for nuclear power plants; converters are maintainable. DMEU-MI, kgf / cm20.04; 0.063; 0.1; 0.16; 0.25; 0.4; 0.63; 1; 1.6; 2.5

SNTs146

These connectors with local protection of contacts designed for use in DC, AC(frequency up to 3MHz) at voltage to 700V(as peak).Plugs(sockets) equipment and cable mounted are manufactured in shielded(SNTs 146Э) and unshielded version(SNTs 146).Equipment mounted connectors can be manufactured with the contacts for printed circuit board.Equipment and cable mounted parts of the connector is manufactured w/o backshell,with straight (closed,opened) and angled backshell.Body parts are manufactured from stainless steel with current conductive coating .Threaded connection with self locking device with visual indication of coupling ending. Contact plating: goldThe contcts are removables assigned for crimping for three dimensional(point-to-point) wiring and for solding mount for printed-circuit wiring, in hermetic plug the contacts assigned for solding.Plugs,sockets of SNTs 146 and SNTs 146G type are mated with the connectors of 983Series under MIL-C-83723 and SNTs 147 manufactured in compliance with TsSNK 430421.011TU.These connectors w/o backshell or with backshell(metallic or plastic) with conductive or nonconductive coating.These connectors are intended for internal wiring and are modified for operation in all climatic areas in compliance with Technical Specifications NKTsS.434410.505TU. Тех. спецификации Technical specificationsTotal number of contacts: 12, 14, 31, 41, 61Operational current per contact from, A: 1, 5Operational current per contact to, A: 2, 5Peak operating voltage,V: 700Plug(male) or socket(female): Plug(male) ,socket(female)Equipment(fixed) or cable mounted(free): Equipment mounted, cable mountedСonnector rear design: W/o junction pipeHermetic or nonhermetic: HermeticShielded or unshielded: ShieldedType of mating: Thereaded connectionNumber of mating: 1000Operating ambient temperature from, °C: -60Operating ambient temperature to, °C: 155Method of wiring: Three-dimensional(point-to-point), solder mount, by crimping(the contacts)Wiring: InternalHermetic, air leakage allowed or not allowed: Not allowed

SNTs146

These connectors with local protection of contacts designed for use in DC, AC(frequency up to 3MHz) at voltage to 700V(as peak).Plugs(sockets) equipment and cable mounted are manufactured in shielded(SNTs 146Э) and unshielded version(SNTs 146).Equipment mounted connectors can be manufactured with the contacts for printed circuit board.Equipment and cable mounted parts of the connector is manufactured w/o backshell,with straight (closed,opened) and angled backshell.Body parts are manufactured from stainless steel with current conductive coating .Threaded connection with self locking device with visual indication of coupling ending. Contact plating: goldThe contcts are removables assigned for crimping for three dimensional(point-to-point) wiring and for solding mount for printed-circuit wiring, in hermetic plug the contacts assigned for solding.Plugs,sockets of SNTs 146 and SNTs 146G type are mated with the connectors of 983Series under MIL-C-83723 and SNTs 147 manufactured in compliance with TsSNK 430421.011TU.These connectors w/o backshell or with backshell(metallic or plastic) with conductive or nonconductive coating.These connectors are intended for internal wiring and are modified for operation in all climatic areas in compliance with Technical Specifications NKTsS.434410.505TU. Тех. спецификации Technical specificationsTotal number of contacts: 12, 14, 31, 41, 61Operational current per contact from, A: 1, 5Operational current per contact to, A: 2, 5Peak operating voltage,V: 700Plug(male) or socket(female): Plug(male) ,socket(female)Equipment(fixed) or cable mounted(free): Equipment mounted, cable mountedСonnector rear design: W/o junction pipeHermetic or nonhermetic: HermeticShielded or unshielded: ShieldedType of mating: Thereaded connectionNumber of mating: 1000Operating ambient temperature from, °C: -60Operating ambient temperature to, °C: 155Method of wiring: Three-dimensional(point-to-point), solder mount, by crimping(the contacts)Wiring: InternalHermetic, air leakage allowed or not allowed: Not allowed

Apple container 1200 * 1000 * 760 "Lux"
Container for vegetables 1600 * 1200 * 1200 "Lux"
Vegetable container 1500 * 1200 * 1000 "Lux"
Container for storing vegetables 1500 * 1000 * 1000 "Lux"
Sugar-free berry puree

All products are manufactured in accordance with GOST by cold or hot extraction. The berry puree contains 100% juice, which makes our product the market leader. Safe for children, thanks to high-precision cleaning of berries from allergenic components (seeds, seeds, peel particles). Assortment of berry puree: blueberries, wild / garden cranberries, lingonberries, sea buckthorn, cloudberries, blueberries, raspberries, strawberries, cherries, black currants, aronia mountain ash. The price is presented for 1 kg of chokeberry puree. Those. specifications Composition: 100% natural berry Storage conditions: no more than – 18 C Shelf life: 12 months Packing and weight: plastic container (volume 1 kg)

Berry puree with sugar

All products are manufactured in accordance with GOST by cold or hot extraction. The berry puree contains 100% juice, which makes our product the market leader. Safe for children, thanks to high-precision cleaning of berries from allergenic components (seeds, pits, peel particles). Assortment of berry puree: blueberries, wild / garden cranberries, lingonberries, sea buckthorn, cloudberries, blueberries, raspberries, strawberries, cherries, black currants. presented for 1 kg of chokeberry puree. Those. specifications Composition: natural berry 90%, sugar 10% Storage conditions: no more than – 18 C Shelf life: 12 months Packing and weight: plastic container (volume 1 kg)

Sugar-free berry puree in aseptic packaging

All products are manufactured in accordance with GOST by cold or hot extraction. The berry puree contains 100% juice, which makes our product the market leader. Safe for children, thanks to high-precision cleaning of berries from allergenic components (seeds, seeds, peel particles). Assortment of berry puree: blueberries, wild / garden cranberries, lingonberries, sea buckthorn, cloudberries, blueberries, raspberries, strawberries, cherries, black currants, aronia mountain ash. The price is presented for 1 kg of chokeberry puree. Those. specifications Composition: natural berry 100% Storage conditions: from 0 to +10 C Shelf life: 12 months

Fruit drink concentrate

Fruit drink concentrate is versatile in use – you just need to dilute with boiled or bottled water in the right proportion. Multifunctional – can also be used as a topping, base for mulled wine, sauces, tea additives. From one base, you can get a different concentration of the finished drink: it is suitable for both standard catering outlets and ordinary or expensive restaurants. Presented in assortment: lingonberry, cranberry, blueberry, sea buckthorn, cherry, red currant, raspberry, black currant, chokeberry, cloudberry. The price is indicated for 1 kg of chokeberry fruit drink. Those. specifications Does not require special storage conditions: the range varies from 0 to + 20 degrees Shelf life: 6 months Packing – asepsis – 2 kg bag

Frozen berries

High-precision electronic cleaning and shock freezing allow us to preserve the entire wide range of vitamins in berries, as well as such "capricious" macro and micro elements as potassium, calcium, phosphorus, magnesium and others. Those. specifications Storage temperature -18 Shelf life: 12 months

Handmade African Inspired Yarn Necklace Womens

Handmade African Yarn Necklace with Metal Ornaments

African Yarn Poncho Handmade

African poncho yarn, great for cold weather and hypoallergenic handmade. Easy to clean and maintain Tech. specifications can be made according to your color and specifications

Handmade yarn African earrings

Handmade, African style earrings. Great for all occasions and 100% Eco-friendly

Warm Babies Yarn Hat

Handmade yarn kids hat, can be made to your specifications. Great for cold weather

Red and gray yarn seat cover

Handmade yarn seat cover is great to keep dust and dirt out of the bay and Eco-friendly

Light Alkalized Cocoa Powder
Natural Cocoa Butter
Black Cocoa Powder
Heavy Alkalized Cocoa Powder
Natural Cocoa Powder
Cocoa Liquor/Cocoa Mass
HOIST (WINCH) ELECTRIC RA-250/500/1000/1200 series
Powder column PKU-1DU

Technical characteristics: Productivity – 250-300 holes per shift. Durability – 4000 number of shots. Diameter of a punched hole – 35 mm. Concrete thickness – up to 50 mm. Concrete grade – 200-400. Used cartridges "D". Overall dimensions, mm – 1350х80х52. Weight – 5.4 kg.

Electric car "Mongoose-2-Electro"

The machine allows the weld bead at the ends of the pipe to remove the inner and outer edges to remove the weld bead between the pipe and the lattice pipe. The use of additional kits allows you to drill tubesheet holes from 51 to 76 mm OD and 5 mm wall thickness, cavalzani up to 50 mm deep and cut 51 to 76 mm OD connections from small diameter thin-walled manifolds. Power supply voltage from 220 V.

Winch TOR CD-300-A (KCD-300 kg, 220 v) with 30 m rope

load 300 kg voltage 220 V rope 30 m motor 1.6 kW size, mm 510x310x300 weight 37 kg

Electric car "mongoose-MIDI-Electro"

The machine allows you to remove internal and external aspects, strip ACE welding pipe ends with wall thickness up to 6 mm, to remove solder between pipe and pipe, sheet. The use of an additional set allows you to drill holes in the tube sheet, pipes with an outer diameter of 29 to 42 mm and a wall thickness of up to 5 mm, cavalzani to a depth of 50 mm Single-phase motor, ~ 220 V, 0.67 kW.

Hand gear hoists (TRSH / 622-A)
Pneumatic machine "Mongoose-2 MT"

In its basic configuration, it is designed for processing pipes with an inner diameter of 39 to 104 mm and an outer diameter of up to 120 mm. Cleaning the inside and outside surfaces. Clean the front panel, inside and outside. Have an oblique cut of the pipeline required after various types of cutting in measure when construction and renovation

Hydraulic trolley AC
AC Series Hand Truck Platform
Rotator (manipulator) welding MAK-70N, carrying capacity up to 70 kg.

Welding rotator MAK-70N with a maximum carrying capacity of 70 kg, designed to hold and position the product during welding. Rotation is carried out by a domestic-made DC geared motor, which provides smooth regulation and stability of the rotation speed. The faceplate is tilted manually using a clamping lever. A sliding contact (copper-bronze) with a load of 500 A is used to connect the return welding cable. All electrical parts are located in the rotator body. Those. specifications Distinctive features of the MAK-70N rotator: – strong base, which ensures stability of rotation of the product without vibrations at various weights and configurations; – motorized rotation of the faceplate in a wide range of speeds; in which you can install the welded product; – operating mode: 2-stroke, 4-stroke – change the direction of rotation – the ability to rotate the faceplate at the marching (maximum) speed for quick installation of the product; – LED indication of the rotational speed of the faceplate (in rpm); – start and stop rotation using a foot pedal. Technical characteristics Maximum lifting capacity * – 70 kg Maximum torque – 15 kg * m Faceplate diameter – 420 mm Rotation speed – 0.5-8.45 rpm Tilt angle – 0 – 90 degrees Supply voltage – 1×220 (50 Hz) H Weight – 73 kg Overall dimensions (HxLxW) – 835x420x670 mm

Torch travel mechanism for vertical and horizontal fillet welds in confined spaces KC-5

The KS-5 welding torch travel mechanism is designed for MIG / MAG fillet welds without transverse oscillations of the torch. Small dimensions of the mechanism make it possible to use it in confined spaces and hard-to-reach places. Distinctive features: – strong metal base; – aluminum wheels covered with special heat-resistant rubber, which ensures the operation of the mechanism on surfaces heated to 250 ° C and a long service life; – powerful magnetic system , providing free movement of the mechanism on inclined and vertical surfaces; – all-wheel drive system of movement of the mechanism allows you to maintain a constant speed of movement even on an uneven surface; – the ability to work with almost any welding machine; – manual supports, providing easy positioning of the torch in two directions when setting the process and correction of its position during welding; – ensuring the constancy of the position of the mechanism relative to the joint during welding due to the copying system, which consists of two thrust rollers mounted on an adjustable axis; – a convenient handle for tearing of the mechanism from the product and transportation; – low weight and dimensions of the mechanism; – favorable price offer. An excellent choice for welding horizontal fillet welds and welding in a confined space, a simplified device, an advantageous price offer. Those. specifications Welding position – Horizontal fillet weld Weight – 8 kg Dimensions: HxWxL – 300x210x260 mm Power supply AC 1 ~ 100-240 V (frequency 50-60 Hz) Ground clearance – 6.5 mm (fixed) Number of driving wheels 4 – on fixed axle Number of thrust rollers 2 – on an adjustable axis (adjustment angle ± 1 ° 40 ") Torch travel – horizontal – 50 mm – vertical – 50mm Burner tilt angle along the axis – 45 ± 10 degrees along the Y axis – 90 ± 10 degrees Carriage speed 5 to 60 cm / min Clamping device – magnetic Clamping force – 25 kg Welding torch * – with straight or curved neck, 350 A (500 A), 3 m (4.5 m)

Rotator (manipulator) welding MINI-15, carrying capacity up to 15 kg.

Description – digital indication of the rotational speed of the plate washer; – simple and intuitive control; – modular design provides convenient location at the workplace; – the plate with 6 slots, which allows you to install any types of cartridges and various devices on it; – manual tilt with fixing the position of the drive unit with clamping levers. Those. specifications Power supply: AC -230 V, frequency 50/60 Hz Rotation speed of the faceplate: 1-9 rpm Reverse of rotation: yes Loading capacity: 15 kg Height of the rotator – 360 mm Height to the axis of rotation in the horizontal position – 205 mm Diameter of the faceplate – 180 mm Number of grooves in the plan-washer – 6 pieces Width of the base – 145 mm Base length – 320 mm Weight: rotator – 15.6 kg control unit – 3.4 kg pedal – 1.2 kg Scope of delivery: 1. welding rotator Mini 15 – 1 pc. 2. control unit with a 3 m network cable – 1 pc. 3. foot pedal – 1 pc. 4. set of operational documentation – 1 pc. Additionally, we recommend purchasing: cartridge – 1 pc. (not included in delivery)

Rotator (manipulator) welding МАК-500N, carrying capacity up to 500 kg.

Rotation and tilt is carried out by a Russian-made geared motor, which provides smooth adjustment and stability of the rotation speed. To connect the return welding cable, a sliding contact (copper-bronze) with a load of 500 A. control panel. Distinctive features of the MAK-500N welding rotator (manipulator): – strong welded base, which provides stability of rotation of the product without vibrations at various weights and configurations; motorized rotation and tilt of the faceplate in a wide range of speeds; – faceplate with six slots suitable for mounting various types cartridges or special devices in which the welded product can be installed; – manual and automatic operation; – the ability to customize the full cycle of work, including setting the start delay time, overlap value, control of the welding machine; – multifunctional panel with a full-text display provides easy control and setting the operating mode of the rotator; – the possibility of installing one or several pneumatic arms to hold the burner; – the rotator can be equipped with a tailstock moving along an additional base for fixing products of great length up to 2000 mm. Those. specifications Technical characteristicsMaximum lifting capacity – 500 kgMaximum bending moment – 120 kg * mMaximum torque – 90 kg * m Faceplate diameter – 700 mm Rotation speed 0.1-1.0 rpm Tilt angle 0 – 105 degrees Power supply – 3х380 (50Hz) VW – 398 kg Overall dimensions – 1090х840х825 mm Pneumatic console – option Tailstock – option

Rotator (manipulator) welding МАК-200N, carrying capacity up to 200 kg.

Rotation is carried out by a Russian-made gear motor, which provides smooth adjustment and stable rotation speed. The tilt is carried out manually, due to the rotation of the handwheel (on request, it can be retrofitted with a geared motor) To connect the return welding cable, a sliding contact (copper-bronze) with a load of up to 500 A is used. built-in control panel Distinctive features of the rotator (manipulator) of welding MAK-200N: – strong welded base, which provides stability of rotation of the product without vibrations at different weight and configuration; – motorized rotation and tilt (on request) of the faceplate in a wide range of speeds; – a faceplate with six slots is suitable for fastening various types of cartridges or special devices in which the workpiece to be welded can be installed; – manual and automatic operating modes; – the ability to customize the full cycle of work, including setting the start delay time, overlap value, control of the welding machine; – multifunctional pan a spruce tree with a full-text display provides easy control and adjustment of the rotator's operating mode; – the ability to install one or several pneumatic arms to hold the torch; – the rotator can be equipped with a tailstock moving along an additional base for fixing long products up to 2000 mm. Those. specifications Maximum lifting capacity – 200 kg Maximum bending moment – 80 kg * m Maximum torque – 38 kg * m Faceplate diameter – 650 mm Rotation speed 0,4-4,0 rpm Tilt angle 0 – 105 degrees Power supply -220 V (50Hz) Weight – 295 kg Overall dimensions mm -1050х850х730 Pneumatic console – option Tailstock – option ** lifting capacity is indicated in the horizontal position of the plan-washer

Rotator (manipulator) welding МАК-200N BA with pneumatic console, carrying capacity up to 200 kg.

Welding rotator MAK-200N BA with a pneumatic console for positioning the welding torch, carrying capacity up to 200 kg, is designed to hold and position the product during welding. Rotation is carried out by a Russian-made gear motor, which provides smooth adjustment and stable rotation speed. The tilt is carried out manually, due to the rotation of the handwheel (on request, it can be retrofitted with a geared motor) To connect the return welding cable, a sliding contact (copper-bronze) with a load of up to 500 A is used. built-in control panel. Distinctive features of the rotator (manipulator) of welding MAK-200N BA: – strong welded base, which provides stability of rotation of the product without vibrations with different weight and configuration; – motorized rotation and tilt (on request) of the faceplate in a wide range of speeds; – a faceplate with six slots is suitable for fastening various types of cartridges or special devices in which the workpiece to be welded can be installed; – manual and automatic operating modes; – the ability to customize the full cycle of work, including setting the start delay time, overlap value, control of the welding machine ; – multifunctional a panel with a full-text display provides – easy control and setting of the rotator's operating mode; – equipped with a pneumatic console to hold the torch; – the rotator can be equipped with a tailstock moving along an additional base for fastening products of great length up to 2000 mm. Those. specifications Maximum lifting capacity ** – 200 kg Maximum bending moment – 80 kg * m Maximum torque – 38 kg * m Faceplate diameter – 650 mm Rotation speed – 0.4-4.0 rpm Tilt angle 0 – 105 degrees Power supply – 220 V (50Hz) Weight – 295 kg Overall dimensions mm – 1050х850х730 Pneumatic console – yes Tailstock – option ** lifting capacity is indicated in the horizontal position of the plan-washer

Rotator (manipulator) welding МАК-500N BACB with tailstock and pneumatic console, lifting capacity up to 500 kg.

Welding rotator MAK-500N BACB with a tailstock and a pneumatic console with a lifting capacity of up to 500 kg is designed to hold and position a product up to 2000 mm long during welding. Rotation and tilt is carried out by a Russian-made gear motor, which provides smooth adjustment and stability of the rotation speed. The cable uses a sliding contact (copper-bronze) with a load of 500 A. Setting and regulation of rotation, tilt, and welding parameters is performed on the built-in control panel. Those. specifications Distinctive features of the rotator (manipulator) of welding MAK-500N BACB: – strong welded base, which ensures stability of rotation of the product without vibrations at different weight and configuration; – motorized rotation and tilt of the faceplate in a wide range of speeds; – faceplate with six slots is suitable for fastening of various types of cartridges or special devices in which the welded product can be installed; – manual and automatic operating modes; – the ability to customize the full cycle of work, including setting the start delay time, overlap value, control of the welding machine; – multifunctional panel with full-text display provides easy control and adjustment of the rotator operating mode; – the rotator is equipped with a tailstock with a pneumatic console moving along an additional base for securing products of great length up to 2000 mm.

Rotator (manipulator) welding МАК-200N BACB with tailstock and pneumatic console, lifting capacity up to 200 kg.

Welding rotator MAK-200N BACB with a tailstock and a pneumatic console, carrying capacity up to 200 kg., Is designed to hold and position the product during welding. Rotation is carried out by a Russian-made gear motor, which provides smooth adjustment and stable rotation speed. The tilt is carried out manually, due to the rotation of the handwheel (on request, it can be retrofitted with a geared motor) To connect the return welding cable, a sliding contact (copper-bronze) with a load of up to 500 A is used. built-in control panel. Distinctive features of the rotator (manipulator) of welding MAK-200N BAСВ: – strong welded base, which provides stability of rotation of the product without vibrations with different weight and configuration; – motorized rotation and tilt (on request) of the faceplate in a wide range of speeds; – a faceplate with six slots is suitable for fastening various types of cartridges or special devices into which the work piece to be welded can be installed; – manual and automatic operating modes; – the ability to customize the full cycle of work, including setting the start delay time, overlap value, control of the welding machine ; – multifunctional a panel with a full-text display provides easy control and adjustment of the rotator operating mode; – equipped with a pneumatic console to hold the torch; – the rotator can be equipped with a tailstock moving along an additional base for securing products of great length up to 2000 mm. Those. specifications Maximum lifting capacity ** – 200 kg Maximum bending moment – 80 kg * m Maximum torque – 38 kg * m Faceplate diameter – 650 mm Rotation speed -0.4-4.0 rpm Tilt angle 0 – 105 degrees Power supply 220 V (50 Hz) Pneumatic console – there is a tailstock – there is

water-soluble microfertilizer "HELATEM Zn 15"

Trace elements in chelated form are used as fertilizers for fertilizing agricultural and ornamental crops on various types of soils in open and protected ground. They are designed to compensate for micronutrient deficiencies. They can be used for root and foliar feeding of plants. Lawn., Ornamental trees and shrubs., Green crops., Cereals, leguminous crops., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops

water-soluble microfertilizer "HELATEM Fe 6"

Trace elements in chelated form are used as fertilizers for fertilizing agricultural and ornamental crops on various types of soils in open and protected ground. They are designed to compensate for micronutrient deficiencies. They can be used for root and foliar feeding of plants. Lawn., Ornamental trees and shrubs., Green crops., Cereals, leguminous crops., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble microfertilizer "HELATEM Cu 15"

Trace elements in chelated form are used as fertilizers for fertilizing agricultural and ornamental crops on various types of soils in open and protected ground. They are designed to compensate for micronutrient deficiencies. They can be used for root and foliar feeding of plants. Lawn., Ornamental trees and shrubs., Green crops., Cereals, leguminous crops., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble complex mineral fertilizer "Aquarin-6"

Water-soluble complex mineral fertilizer with chelated microelements. It is intended for feeding field, garden, ornamental, vegetable crops in open and protected ground using any irrigation and irrigation systems, for corrective foliar dressing, as an antistressant during pesticide treatments and unfavorable weather conditions. ., Cereals, legumes., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble complex mineral fertilizer "Aquarin-5"

Water-soluble complex mineral fertilizer with chelated microelements. It is intended for feeding field, garden, ornamental, vegetable crops in open and protected ground using any irrigation and irrigation systems, for corrective foliar dressing, as an antistressant during pesticide treatments and unfavorable weather conditions. ., Cereals, legumes., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble complex mineral fertilizer "Aquarin-3"

Water-soluble complex mineral fertilizer with chelated microelements. It is intended for feeding field, garden, ornamental, vegetable crops in open and protected ground using any irrigation and irrigation systems, for corrective foliar dressing, as an antistressant during pesticide treatments and unfavorable weather conditions. ., Cereals, legumes., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble complex mineral fertilizer "Aquarin-15"

Water-soluble complex mineral fertilizer with chelated microelements. It is intended for feeding field, garden, ornamental, vegetable crops in open and protected ground using any irrigation and irrigation systems, for corrective foliar dressing, as an antistressant during pesticide treatments and unfavorable weather conditions. ., Cereals, legumes., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble complex mineral fertilizer "Aquarin-13"

Water-soluble complex mineral fertilizer with chelated microelements. It is intended for feeding field, garden, ornamental, vegetable crops in open and protected ground using any irrigation and irrigation systems, for corrective foliar dressing, as an antistressant during pesticide treatments and unfavorable weather conditions. ., Cereals, legumes., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

water-soluble complex mineral fertilizer "Aquarin-1"

Water-soluble complex mineral fertilizer with chelated microelements. It is intended for feeding field, garden, ornamental, vegetable crops in open and protected ground using any irrigation and irrigation systems, for corrective foliar dressing, as an antistressant during pesticide treatments and unfavorable weather conditions. ., Cereals, legumes., Vegetable crops., Fruit crops., Industrial crops., Coniferous crops., Flower and decorative crops., Berry crops.

Vietnamese Cashew Nuts Kernels WW180
Vietnamese Cashew Nuts Kernels SW
Vietnamese Cashew Nuts Kernels DW
Vietnamese Cashew Nuts Kernels LBW240
Vietnamese Cashew Nuts Kernels LP
Vietnamese Cashew Nuts Kernels WS
Vietnamese Cashew Nuts Kernels WW450
Vietnamese Cashew Nuts Kernels WW450
Vietnamese Cashew Nuts Kernels WW320
Vietnamese Cashew Nuts Kernels WW240
Vietnamese Cashew Nuts Kernels WW210
X-ray protective plates

PPS-73B is a material based on composite plastic and barite concentrate as filler. The X-ray shielding boards are mounted on a standard plasterboard frame. The use of PPS-73B dramatically reduces the time of work on equipment for protecting X-ray rooms and eliminates dust, dirt and additional measurements of the lead equivalent, which are provided when using barite plaster for these purposes. This is especially important when reconstructing X-ray rooms in an existing medical institution. Those. specifications Slabs PPS-73B have a barite concentrate of 74 ± 1.5%. The lead equivalent, depending on the thickness of the sheet, is: 8 mm – 0.910 mm – 1.212 mm – 1.6 The main dimensions of the slabs are 700 x 500 mm; 1000 x 500 mm. Thickness: 8 , 10, 12 mm.

Tank and reactor made of polypropylene

Reactors made of polypropylene meet all the requirements for ensuring safe operation, including vibration, noise and strength characteristics. Reactors can be supplied with: stirrers, chemically resistant pipelines, instrumentation, etc. Reactors are designed and manufactured according to the technical specifications of the Customer (sketches, drawings ). Those. specifications According to the drawings and technical specifications of the customer

Barrier plates

Borated plates are made from a mixture of high-pressure polyethylene with amorphous boron. Depending on the percentage of boron content, the following grades are produced: PB-3 (3%) PB-5 (5%) PB-7 (7%) PB-8 (8%) ) PB-10 (10%) PB-20-5B (with the addition of boron 5% and polystyrene 20%) Basic standard sizes 1000 x 500 mm; 700 x 500 mm Thickness from 10 to 70 mm 5k Tech. Specifications Main standard sizes 1000 x 500 mm; 700 x 500 mm Thickness from 10 to 70 mm.

Vacuum Forming Machine

Name of indicators 1. Productivity, pcs / h, depending on the type of sheet 2. Molding area, m ² 6.03. Dimensions of the formed sheet, mm. 3000х2000 4. Thickness of the formed sheet, mm 0.3 – 12.05. Heater power, kW-maximum 231-in operating mode 150-2006. Nominal pressure in the pneumatic system, MPa 0.6 ± 0.37. Supply voltage, V 3808. Current frequency, Hz 509. The number of heating control zones is 17410. Overall dimensions, (LxWxH) mm4800x4000x3000 Tech. specifications Machine dimensions in plan: ● length (depth): 5300 mm, ● width: 4400 mm, ● height: 3920 mm.1.2. The size of the blanks to be formed: ● 3000 x2000 mm1.3. Drawing depth (maximum): 700 mm 1.4. Effective forming area: ● min: as agreed with the customer ● max: 2950 x 1950 mm

Set of decking for the construction of level crossings.

Railroad crossing is a place of direct intersection of railway rails and a road or any other road. To ensure a single-level, safe and comfortable crossing of roads at a railway crossing, rubber floorings are used. Railway floorings have the following properties: they are excellent in repelling water, increase the coefficient of adhesion of the wheels of transport with a railway crossing, are resistant to freezing; they take shock loads well, dampen vibration (partially) ; fit tightly to the railway tracks, preventing the ingress of dirt on the rails. Rubber decks are designed for operation in various climatic conditions. Rubber coatings for level crossings are made with the expectation of long-term operation under severe loads and loads in the temperature range from -40 ° C to + 60 ° C. The permissible load from a car wheel is up to 4.5 tons. The service life of railway flooring is about 25 years. The railway flooring, consisting of monolithic rubber-cord-based plates, fixed to each other in a closed loop, is a rubber-cord flooring. The width of the rubber-cord flooring is a multiple of 545 mm. Level crossing slabs are suitable for the R-65 rail, the pitch of wooden or reinforced concrete sleepers is 545 mm. Slabs for rubber-cord decking are manufactured in accordance with TU 32TsP828-97. There is no ice crust on the plates, the rubber plate reduces shock loading, dampens vibrations. This rubber-cord flooring for railway crossings is an excellent combination of simple design, affordable price and long-term operation. Those. specifications Set of railroad decks with fastening KB 6.5 m wide (10 pieces included) Completeness of one decking: Internal plate OP 467.001 – 12 pcs. External plate OP 467.002 – 24 pcs. Internal insert 202.01-VN-SKI-01-04 – 24 pcs. External insert 202.01-VN-SKI-01-08 – 24 pcs. Fasteners – 1 set

Bioelectric power plant BGU100

The energy complex provides processing of manure of 500 pigs in a volume of 5 tons / day (humidity 80%). Biogas plant BGU-100 provides disinfection of cattle manure. Designed for autonomous provision of farms, state enterprises, small urban settlements. Those. specifications The energy complex provides processing in the amount of 5 tons / day (humidity 80%). Biogas plant BGU-100 provides disinfection of cattle manure, production of biogas in the amount of 8m3 / hour. Electricity generation from biogas – 10 kW Or heat energy generation from biogas – 20 kW. EK 100 station Electricity generation is 16 kW, while auxiliary needs will be about 3 kW. Heat generation will be about 0.1 Gcal. The amount of ash, which can be used as fertilizer, at the output will be about 250 / day.

Bioelectric power station BGU 5000

The biogas plant is designed to process 100 tons of organic waste per day, providing biogas output in the amount of 350 m3 per hour. Electricity generation from biogas – 1 MW Heat energy generation from biogas –3.9 Gcal / hour). Those. specifications The organic waste disposal center provides processing of excess activated sludge in the amount of 280 m3 / day (humidity 92-95%), as well as food organic waste, agricultural and crop waste in the amount of 100 tons / day (humidity ~ 70%). includes: 1. A complex of biogas plants BGU – 5000 (4 vertical reactors with a volume of 1250 m3 each), which provides processing of a mixture of organic waste, production of biogas in the amount of 350 m3 / h. 2. A cogeneration station: Generation of electrical energy from biogas – 785 kW. from biogas – 1344 kW (1.2 Gcal / h). 3. Separation unit: Separation of the effluent into solid and liquid fractions, with the return of the liquid fraction back to the fermentation cycle. 4. Station SBTT-1.5: The station is designed for drying the solid fraction effluent 5. Station EK-1.5: The station is designed for combustion of effluent. Electricity generation is 1.5 MW, auxiliary needs will be about 500 kW. Heat generation will be about 3.9 Gcal. The amount of ash, which can be used as fertilizer, at the output will be about 15 tons / day.

High-strength chemical protection S-COMPOSIT

S-COMPOSIT polyurethane coatings have the highest adhesion to the treated surfaces, have a long service life (indoors up to 50 years, in an open atmosphere for at least 15 years), do not harm human health even with direct constant contact with drinking water and food. S-COMPOSIT polyurethane coatings can be used to protect concrete floors, walls, ceilings, metal structures, pipelines, beams, bulkheads on sea and river vessels, the bottoms of vehicles, trains, pipelines. S-COMPOSIT compounds were specially designed for industrial facilities operated in harsh conditions with intense exposure to external factors such as ultraviolet light, temperature drops, high humidity, acid evaporation, etc. The highest abrasion resistance of S-COMPOSIT polyurethane coatings, flexibility , vibration resistance and high adhesion allows them to be used, among other things, for anticorrosive treatment of objects of transport. Polymerization of S-COMPOSIT polyurethane coatings occurs when they interact with air moisture or when a special catalyst is added to their composition, which ensures complete drying in the shortest time and a quick set of strength … The filling of the compositions with various target substances gives them additional properties of hydrophobicity, aesthetic appearance, strength, etc. The use of S-COMPOSIT polyurethane coatings on concrete surfaces not only protects them from external influences, but also improves the properties of the concrete itself, penetrating into their structure. Concrete, the surface of which is impregnated with the S-COMPOSIT composition, becomes hydrophobic, its surface does not become dusty under mechanical action, its strength grade actually increases significantly. Applying the S-COMPOSIT polyurethane composition to metal products significantly increases their service life, since it reduces or even completely eliminates any external influence. The highest adhesion and flexibility of S-COMPOSIT coatings allows them not to peel off from the metal in the event of its thermal expansion and contraction, as well as during bending and vibration of the base. and maximum air dryness during the production process, due to which the finished mixture is a highly stable polymer. Materials and composites of world leaders in the chemical industry are used as raw materials. Summing up the above, we can conclude that the use of S-COMPOSIT polyurethane coatings to protect a wide variety of surfaces allows not only performing high-quality work in the shortest possible time, but also saving money on subsequent repairs. Those. Specifications Information on technical specifications can be found on our website: http://www.inn-t.com/kharakteristiki-s-composit

NANO-FIX PRIMER adhesion enhancer

NANO-FIX PRIMER is a highly concentrated solution of acrylic resins and organic solvents with the addition of nano-sized plasticizers and modifiers. Appearance and color of the coating: Homogeneous, glossy, transparent, shade not standardized Tech. Specifications Information on the technical characteristics of the product can be found on our website: http://www.inn-t.com/kharakteristiki-nano-fix-primer

Anti-corrosion primer-enamel NANO-FIX ANTICOR

The primer has the ability to penetrate into microcracks and pores of the metal while simultaneously suppressing the incipient corrosion processes. At the same time, strong chelate complexes with the polymer component of the primer are formed on the metal surface, which reliably protect the metal from external influences. This mechanism of action allows NANO-FIX "Anticor" to firmly bind a layer of rust up to 100 microns. NANO-FIX "Anticor" contains nanosized silicic acid sol and alumosol (boehmite). The addition of nanosized sols to the NANO-FIX "Anticor" composition provides a significant decrease in the content of organic binder while maintaining the elasticity of the coating and a significant increase in adhesion to various surfaces, as well as the cohesive strength of the coating itself. At the same time, the NANO-FIX "Anticor" coating practically does not shrink due to the high percentage of dry residue, and has a high temperature resistance. NANO-FIX "Anticor" coating implements a fundamentally new approach to corrosion protection, which consists in a complex chemical interaction of component molecules with iron oxides and atoms of the metal lattice. The primer has the ability to penetrate into microcracks and pores of the metal while simultaneously suppressing the incipient corrosion processes. At the same time, strong chelate complexes with the polymer component of the primer are formed on the metal surface, which reliably protect the metal from external influences. This mechanism of action allows NANO-FIX "Anticor" to firmly bind a layer of rust up to 100 microns. routes of pipelines, bridges, and also allows the use of NANO-FIX "Anticor" as an independent coating. Those. Specifications For technical specifications, please visit our website: http://www.inn-t.com/tekhnicheskie-dannye-nano-fix-anticor

NANO-FIX MEDIC anti-mold agent

NANO-FIX ™ MEDIC is a ready-to-use aqueous solution of the latest generation of antiseptic preparations, which, without being dangerous for people and the environment, are an effective means of suppressing harmful microflora, allow you to quickly and effectively get rid of mold, is active against bacteria and infectious agents .NANO-FIX ™ MEDIC contains polymers with a particle size of 10-50 nanometers, thanks to which the antiseptic remains in the treated surfaces for many years, without being exposed to weathering and washing away. NANO-FIX ™ MEDIC does not contain chlorine and does not have a pronounced odor. NANO-FIX ™ MEDIC can be used as an independent means of fighting mold fungi and as an additive to other materials (primers, plasters, putties, tile and wallpaper adhesives, tile grout, etc.) to prevent the appearance and development of mold. NANO-FIX ™ MEDIC is convenient in application and does not require special skills. Those. specifications For technical data, please visit our website: http://www.inn-t.com/tekhnicheskie-dannye-nano-fix-medic

R-COMPOSIT RADON anti-radon protection

R-COMPOSIT ™ RADON materials look like paints, they are applied to surfaces with a brush, spatula or roller, and the use of a high-pressure airless spray gun (advisable for large areas) increases work productivity tenfold. R-COMPOSIT ™ RADON materials are also convenient for use on surfaces complex geometric shapes and / or with a variety of utilities (pipelines, electrical wiring, etc.). R-COMPOSIT ™ RADON materials are distinguished by excellent adhesion (the basis for application can be a concrete screed, foundation blocks and floor slabs, any plaster, brick, ceramic tiles, gypsum, gypsum plasterboard, fiberboard, chipboard, wood, etc.). R-COMPOSIT ™ RADON materials do not support combustion and are applied without the use of open flame and organic solvents, therefore they can also be used on fire hazardous facilities. After drying, R- COMPOSIT ™ RADON forms a continuous, seamless, glossy finish that is waterproof and resistant to external influences. COMPOSIT ™ RADON have unique elasticity and strength (the elongation of the finished coating to break is 500%. This means that the R-COMPOSIT ™ RADON coating will stretch 5 (!) Times before tearing. R-COMPOSIT ™ RADON coatings are resistant to moisture, UV radiation and temperature extremes, do not change their properties in the temperature range from -30C up to + 100C, they are characterized by low thermal conductivity, high resistance to many chemical and biochemical environments, have guaranteed wear resistance, reliability and high (more than 15 years) durability. R-COMPOSIT ™ RADON are finishing materials and after their application, additional lining is not required. R-COMPOSIT ™ RADON is produced in 2 modifications, which differ in composition and color: R-COMPOSIT ™ RADON – 1 – white and easy to tint. R-COMPOSIT ™ RADON – 2 – gray, therefore it can only be tinted in dark colors. In terms of functionality and application features, modifications R-COMPOSIT ™ RADON – 1 and R-COMPOSIT ™ RADON – 2 are identical. Those. specifications Technical data can be found on our website: http://www.inn-t.com/tekhnicheskie-dannye-r-composit-radon

Polymer bituminous waterproofing R-COMPOSIT

R-COMPOSIT has unique properties – the highest strength, resistance to static effects of water, is resistant to the effects of solutions of salts and alkalis. The scope of R-COMPOSIT is all types of flat roofs (both new and used), reverse waterproofing of bathrooms and kitchens, waterproofing of swimming pools, foundations, and any other enclosing structures that require protection from water penetration. The use of R-COMPOSIT, in contrast to waterproofing materials based on bitumen, does not require the use of fire and organic solvents (gasoline, diesel fuel, etc.). This makes the application process easy and safe. R-COMPOSIT waterproofing material is an environmentally friendly and fireproof compound. Uniquely low flammability and flammability indicators (G1 and B1) make it possible to use it at hazardous facilities. Linear elongation of R-COMPOSIT is 509%! This indicator indicates that, before the rupture of the R-COMPOSIT coating occurs, it must be stretched 5 times relative to its original size. Upon termination of exposure, it will return to its original size. This indicator is provided by the highest quality and the finest selection of raw materials from the world's leading manufacturers, combined with a high-class level of knowledge and training of our scientific specialists. The high level of linear tension allows the R-COMPOSIT polymer waterproofing coating to maintain the integrity of the layer even with the appearance of microcracks in the structure of the base on which it is applied. The base color of the R-COMPOSIT coating is white (tinting according to the RAL palette is possible). This property gives the coating a number of invaluable consumer advantages over conventional bituminous waterproofing materials. First, it helps reflect the sun's radiation, which in turn saves on air conditioning on the upper floors of the building. Secondly, the surface of the roof, covered with bituminous waterproofing, during operation is exposed to the colossal effect of solar radiation, and on a hot day, even in the conditions of the Russian climate with predominantly low air temperatures, it overheats. : – The basis of the R-COMPOSIT coating is a marble-acrylic mixture modified by special additives, which has unique strength, resistance to external factors and 509% elongation. – The white color of the roof will not only significantly extend its service life, but also save money on air conditioning of the upper floors of buildings by reflecting solar heat. – Waterproofing R-COMPOSIT is an environmentally friendly coating that is water-soluble before polymerization and does not emit substances harmful to humans into the air. – Indicators of flammability and flammability of the coating (G1 and B1, respectively) provide the obtained waterproofing composition with high fire safety indicators. – The absence of seams and joints in the waterproofing carpet, together with the highest adhesion rates, guarantee the absence of leaks for a period of at least 15 years. – The application of the R-COMPOSIT polymer coating can be carried out by persons who do not have special skills in waterproofing, using the usual painting tools (brush, roller, spray gun). – Environmental friendliness of R-COMPOSIT waterproofing makes it possible to use it not only on the roofs, but also on the enclosing structures inside the premises. Those. specifications The technical characteristics of the coating can be found on the website: http://www.inn-t.com/tekhnicheskie-dannye-r-composit

RE-FLAME intumescent fire retardant coating

In the event of a fire, load-bearing metal structures exposed to high temperatures begin to deform. This phenomenon leads to the destruction of the building in very short periods of time. In order to increase the time during which the destruction of the building due to the thermal effects of the flame does not begin, it is necessary to protect the metal surface from thermal effects. RE-FLAME intumescent fire retardant paint has properties that allow it to expand in volume up to 50 times when heated. Expanding, RE-FLAME forms a refractory foam with a low thermal conductivity, which prevents the flame and metal surface temperatures from reaching the flame. Thus, RE-FLAME keeps the flame temperature in check for up to 90 minutes. During this time, it is planned to completely evacuate the personnel from the premises and arrive at the emergency service facility, which will have time to extinguish the fire before the building begins to collapse. RE-FLAME fire protection coating is manufactured exclusively using American and European components on high-tech equipment, which fully allows process the components to the optimum degree of mixing and grinding. It should also be noted that the composition of RE-FLAME fire protection includes nanostructured particles (nanoplates) of aluminum oxide, which provide high durability of the coating, strength and resistance to air humidity. Those. specifications Technical data on the product can be found on the website: http://www.inn-t.com/tekhnicheskie-dannye-re-flame

Highly concentrated nano-impregnation NANO-FIX

NANO-FIX ™ contains in its structure nano-sized (10-50 nanometers) particles of special high-quality polymers and due to this it has excellent properties: – has excellent penetration into porous materials, equalizes the absorbency of porous surfaces; – provides dedusting, increases surface strength and wear resistance concrete, cement, plaster, stone and wood substrates before applying adhesives, paints and other coatings; – increases adhesion between different materials, reduces the absorbency of surfaces and, thus, significantly reduces the consumption of adhesives, paints of other materials during their application; – can be used on open air to strengthen and protect surfaces made of concrete, cement, natural stone and wood from destruction under the influence of UV rays, atmospheric precipitation and temperature extremes; – is a hypoallergenic material, since it does not contain chemical solvents, toxic components or harmful compounds; increases the service life of surfaces; – retains the vapor permeability of surfaces; – compatible with all plasters, putties and paints; – has a weak neutral odor, which quickly evaporates when the impregnation dries. Those. Specifications For technical data please visit our website: http://www.inn-t.com/tekhnicheskie-dannye-nano-fix

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

MIRROR MOSAIC

The mosaic is made of high quality Russian mirror. Scope of the material: interior decoration of residential and public premises. Suitable for use in damp rooms. It is not recommended to use it on the floor, in the pool bowl, in rooms with temperatures above +50 degrees Celsius, as well as outdoors. Mirror mosaic is a highly decorative material that retains its appearance for many years, remaining relevant and in demand. Interiors where mirror mosaics are used always look bright, sophisticated and stylish. Mirror mosaic is suitable for decorating interiors in any style. Our company is ready to find an individual solution for your projects. Those. Specifications Mirror mosaic is glued on cement-free adhesives. Most suitable: litokol litoakril plus.

Motorcycle is one of the kind of vehicles be used popularly in many countries belong Southeast Asia.
Motorcycle is one of the kind of vehicles be used popularly in many countries belong Southeast Asia.
Motorcycle is one of the kind of vehicles be used popularly in many countries belong Southeast Asia.
ATV TIRES
Motorcycle Tires
Motorcycle Tires
Motorcycle Tires
Gatekeeper 03

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; contactless interface (PayWave, PayPass) – OPTIONAL The front panel is equipped with a skimming pad detection sensor – OPTIONAL Maximum number of external connected circuits (elements): power line; 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 01

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; The minimum number of external connected circuits (elements): power line; external blocking line; lock; exit button; Programmable during production 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 03

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; contactless interface (PayWave, PayPass) – OPTIONAL The front panel is equipped with a skimming pad detection sensor – OPTIONAL Maximum number of external connected circuits (elements): power line; 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 02

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; Increased number of external connected circuits (elements): power line; external blocking line; customer presence sensor line in the ATM area; lock; exit button; 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Gatekeeper 01

The device is a single block of the reader-controller, installed directly next to the locked door from the street side. The device is anti-vandal and all-weather. Anti-vandal case and mount type ONEWAY; Works with all types of bank cards (contact and contactless); Support for work with NSPK "MIR" cards; Support for work with CHINA UnionPay cards Customizable filter on the passage of a certain set of cards; Filter for prohibition to the passage of expired cards; There is a possibility of mechanical unlocking of the door; Self-diagnosis of external elements of the system state; Detects skimming pads on the device reader with subsequent alarm notification; Android application for setting up the system via the Bluetooth interface; System autonomy, saves personal data of bank card holders; Warranty 12 months and service support; Those. specifications The hybrid reader of the device provides access by bank cards: with a magnetic stripe; with a chip; The minimum number of external connected circuits (elements): power line; external blocking line; lock; exit button; Programmable during production 1. The magnetic head of the reader and the contact group for reading chip cards are as far as possible inside the device to prevent from the influence of the external environment (precipitation, dust) 2. Proximity card reader 3. Foreign object sensors (anti-skimming) 4. Anti-vandal protective pad 5. A protective shutter protects the reader mechanism from getting tokens, coins, small flat objects 6. The service hole allows for emergency removal of the plastic card 7. LED indicator 8. Sound emitter 9. DIP switch for operating modes 10. Terminal connector for connecting system peripherals

Mirror Universe

Size / Price750х750: 47280 rub.750х1100: 57240 rub.1200х1200: 77280 rub. Tech. specifications 1200×1200

Fur coat "Laurent" from fur of the Finnish fox

Straight silhouette coat made of Finnish fox fur (growing technology). The set-in sleeve made of Italian fabrics is decorated with handmade embroidery. Stand-up collar. Hook-and-eye closure. Finnish fox fur looks spectacular and expensive. This type of fur is distinguished by a long guard hair, which gives the impression of exotic feathers, as well as a thick pile. Finnish fox fur products are luxurious and always attract attention. In addition, this type of fur is quite warm and is suitable even for the Siberian winter. The fur of the Finnish fox looks spectacular and expensive. This type of fur is distinguished by a long guard hair, which gives the impression of exotic feathers, as well as a thick pile. Finnish fox fur products are luxurious and always attract attention. In addition, this type of fur is quite warm and is suitable even for the Siberian winter. For more than 10 years, the AVenue Fur Factory has been producing exclusive fur products for men, women and children. The AVenue factory prefers elite European furs, which have an excellent rich pile, thick underfur and a silky texture. Products made from such fur retain exquisite beauty for many years. Clients of the Avenue fur factory are representatives of the elite class of Russia and world-famous companies. AVenue tries to satisfy the needs of its customers as much as possible. The factory produces luxurious and high-quality hats, clothes and accessories from fur. The products of the factory satisfy the demands of even the most demanding customers, and the high professionalism of the craftsmen allows us to fulfill orders for the most refined taste and in the shortest possible time. AVenue women's collections harmoniously combine sophistication and comfort, elegance and novelty. Men's collections are distinguished by conciseness and style, convenience and practicality. Due to the observance of quality standards, the company maintains a leading position in the market and moves forward, so it develops new technologies and sets trends in the fur market. Unique products of the AVenue factory are shown on the catwalks of the world in front of VIP guests. , including movie stars, musicians, designers, producers, stylists, as well as politicians and socialites. We offer the organization of wholesale supplies of fur products from the AVenue factory. We represent the AVenue fur factory, for us and our customers the factory provides a special price. Fur products are produced in Novosibirsk. In terms of quality, they are not inferior to foreign counterparts, and in many cases exceed expectations at a more affordable price. We will also provide: • Favorable conditions for wholesale buyers. • An individual scheme of interaction for each partner. • Long-term cooperation and regular deliveries of products. • Delivery worldwide. …

Mirror Bamboo

Size/Price900х600: 22920 rub.600х900: 19320 rub.750х750: 22320 rub.1500х750: 33600 rub.1200х600: 19680 rub.1150х700: 27600 rub.1100х750: 27600 rub.600х1200: 20640 rub. Тех. спецификации 600х1200

Mirror Varan

Size/Price900х600: 21720 rub.600х900: 16800 rub.750х750: 19320 rub.1500х750: 35400 rub.1200х600: 28200 rub.1150х700: 27360 rub.1100х750: 26040 rub.600х1200: 18480 rub. Тех. спецификации 600х1200

Mirror Abstract

Size/Price900х600: 14640 rub.600х900: 12240 rub.750х750: 13200 rub.1500х750: 14640 rub.1200х600: 19680 rub.1150х700: 19680 rub.1100х750: 18120 rub.600х1200: 13800 rub. Тех. спецификации 600х1200

Mirror Butterfly

Size / Price900х600: 13800 rub.600х900: 12240 rub.750х750: 13200 rub.1500х750: 24120 rub.1150х750: 19800 rub.1100х750: 18360 rub.600х1200: 13800 rub. Tech. specifications 600×1200

Wheat flour
Bio-gel for washing white and plain fabrics 2 liters

ARISO – bio-gel for plain and white fabrics is intended for washing plain and white fabrics, washes away dirt, does not leave stains on dark clothes and preserves the saturation of its color. When washing white linen, it maintains its original whiteness, removes a grayish or yellowish tint from the fabric that appears during wearing. Laundry washed with gel acquires a light pleasant aroma, becomes fresh, soft and easy to iron. APICO is made from safe raw materials, does not cause allergies, is suitable for washing children's clothes, it is completely removed from the fabric after the first rinse. The packaging has an optimal volume of 1 liter – it is enough for 20 washes. The bottle is equipped with an ergonomic handle, a lid with a dispenser and a measuring cup. This makes the gel very comfortable to use. The bright packaging design makes the product stand out on the store shelves and attracts the attention of customers.

Bio-gel for washing colored fabrics 2 liters

APICO bio-gel for colored and white fabrics, designed for washing colored and white fabrics, perfectly removes dirt, retains the brightness of fabric colors and prevents color mixing. It also partially restores the saturation of the shades of faded clothing. When washing white linen, bio-gel maintains its original whiteness, removes a grayish or yellowish tinge from the fabric that appears during wear. Laundry washed with bio-gel gets a light pleasant aroma, becomes fresh, soft and easy to iron. APICO is made from safe raw materials, does not cause allergies, is suitable for washing children's clothes, it is completely removed from the fabric after the first rinse. The increased package volume of 2 liters increases the efficiency of the product – it is enough for 40 washes. The bottle is equipped with an ergonomic handle, a lid with a dispenser and a measuring cup. This makes the bio-gel very comfortable to use. The bright packaging design makes the product stand out on the store shelves and attracts the attention of customers.

Bio-gel for washing white and plain fabrics 1 liter

ARISO – bio-gel for plain and white fabrics is intended for washing plain and white fabrics, washes away dirt, does not leave stains on dark clothes and preserves the saturation of its color. When washing white linen, it maintains its original whiteness, removes a grayish or yellowish tint from the fabric that appears during wearing. Laundry washed with gel acquires a light pleasant aroma, becomes fresh, soft and easy to iron. APICO is made from safe raw materials, does not cause allergies, is suitable for washing children's clothes, it is completely removed from the fabric after the first rinse. The packaging has an optimal volume of 1 liter – it is enough for 20 washes. The bottle is equipped with an ergonomic handle, a lid with a dispenser and a measuring cup. This makes the gel very comfortable to use. The bright packaging design makes the product stand out on the store shelves and attracts the attention of customers.

Bio-gel for washing colored fabrics 1 liter

APICO bio-gel for colored and white fabrics, designed for washing colored and white fabrics, perfectly removes dirt, retains the brightness of fabric colors and prevents color mixing. It also partially restores the saturation of the shades of faded clothing. When washing white linen, bio-gel maintains its original whiteness, removes a grayish or yellowish tinge from the fabric that appears during wear. Laundry washed with bio-gel gets a light pleasant aroma, becomes fresh, soft and easy to iron. APICO is made from safe raw materials, does not cause allergies, is suitable for washing children's clothes, it is completely removed from the fabric after the first rinse. The increased package volume of 2 liters increases the efficiency of the product – it is enough for 40 washes. The bottle is equipped with an ergonomic handle, a lid with a dispenser and a measuring cup. This makes the bio-gel very comfortable to use. The bright packaging design makes the product stand out on the store shelves and attracts the attention of customers.

Date candies with peppermint oil and menthol

Lollipops on date syrup with cedar resin with mint oil and menthol – a source of essential oils. It is used in medicine as an oil that helps to ease breathing, calm mental fatigue, and weaken the action of many colds. Ingredients: date syrup, starch syrup, cedar resin in cedar oil, vitamin C (ascorbic acid), peppermint oil, menthol, sugar, citric acid Energy value per 100 g of product: 390 Kcal / 1630 KJ Nutritional value per 100 g of product: carbohydrates 97.0 g Net weight: 10 lozenges, 3.2 g each.

Date candies with peppermint oil and menthol

Lollipops on date syrup with cedar resin with mint oil and menthol – a source of essential oils. It is used in medicine as an oil that helps to ease breathing, calm mental fatigue, and weaken the action of many colds. Ingredients: date syrup, starch syrup, cedar resin in cedar oil, vitamin C (ascorbic acid), peppermint oil, menthol, sugar, citric acid Energy value per 100 g of product: 390 Kcal / 1630 KJ Nutritional value per 100 g of product: carbohydrates 97.0 g Net weight: 10 lozenges, 3.2 g each.

Date lollipops with sea buckthorn oil

Lollipops on date syrup with cedar gum and sea buckthorn oil. Date syrup is a storehouse of vitamins, contains fluoride, oxytocin, squalene. Cedar vermilion is a powerful antiseptic with anti-inflammatory and antimicrobial properties. Cedar oil – softens the throat, creating a normal microflora. oil is a source of carotenoids (carotene, vitamin A), oil used in medicine in many countries of the world since ancient times, helps to alleviate the course of many diseases. Sea buckthorn is mined in the Altai mountains, in an ecologically clean area. Ingredients: date syrup, starch syrup, cedar resin in cedar oil, vitamin C (ascorbic acid), sea buckthorn oil, sugar, citric acid.Energy value per 100 g of product: 390 Kcal / 1630 KJ Nutritional value per 100 g of product: carbohydrates 97, 0 g. Net weight: 10 lozenges, 3.2 g each.

Date candies with lemon and propolis

Series "My Health" For a long time, healers all over the world have been looking for the "key composition" of natural components to influence the body as a whole. Homeopaths have carried out special research in the field of complex healing, rejuvenation and prolongation of life. This series of candies includes well-known ingredients that are familiar to us for their miraculous properties of influence on our health. Buying high-quality date candies in bulk from the Finik Eco company, you can be sure in improving the health of regular customers. This means that customers will come to your store constantly, throughout their long life. By ordering natural sweets from Finik Eco, you get a reliable and grateful partner, and also make the world a little better. Date lozenges with propolis and lemon for the prevention of colds, acute respiratory infections and influenza virus. General composition: Date syrup – a storehouse of vitamins, contains fluoride, oxytocin, squalene. Cedarwood is a powerful antiseptic with anti-inflammatory and antimicrobial properties. Cedar nut oil, creating – normal microflora on the mucous membrane. Propolis is a substance that suppresses activity, and also kills a huge range of various microorganisms: viruses, tubercle bacillus, Trichomonas, candidiasis, fungi, hepatitis and influenza viruses. Ingredients: date syrup, starch syrup, cedar resin in cedar oil , vitamin C (ascorbic acid), propolis extract, lemon oil, sugar, citric acid. Energy value per 100 g of product: 390 Kcal / 1630 KJ Nutritional value per 100 g of product: carbohydrates 97.0 g. Net weight: 10 lozenges, 3 each , 2 g.

Date candies with mummy

Date candies contain natural natural ingredients: date syrup, cedar resin, cedar oil, plant extracts, propolis, black cumin, etc., which have been used by various peoples for more than 5000 years to improve well-being, prevent colds and more. a person will consume sweets, then he will be able to avoid certain diseases, and if abused, it will harm his body. For a long time, healers around the world have been looking for a "key composition" of natural components to influence the body as a whole. Homeopaths have carried out special studies in the field of complex healing, rejuvenation and prolongation of life. This type of lozenges on date syrup (honey) contains: Date syrup – a storehouse of vitamins, contains fluoride, oxytocin, squalene. Cedar tree – a powerful antiseptic with anti-inflammatory and antimicrobial properties. . Cedar nut oil – softens the throat, creating a normal microflora on the mucous membrane. Mumiyo – "the power of the mountains" – can significantly improve the human condition. Normalizes appetite and sleep, helps with fractures. Improvements have been noticed in the treatment of allergies. Ingredients: date syrup, starch syrup, cedar resin in cedar oil, vitamin C (ascorbic acid), mumiyo extract, sugar, citric acid. Energy value per 100 g of product: 390 Kcal / 1630 KJ Nutritional value in 100 g of product: carbohydrates 97.0 g Net weight: 10 lozenges, 3.2 g each.

Date candies with black cumin

Date candies contain natural natural ingredients: date syrup, cedar resin, cedar oil, plant extracts, propolis, black cumin, etc., which have been used for more than 5000 years by various peoples to improve their health, prevent colds and more. a storehouse of vitamins, contains fluoride, oxytocin, squalene. Cedar vertebrate – a powerful antiseptic with anti-inflammatory and antimicrobial properties. Cedar nut oil – softens the throat, creating a normal microflora on the mucous membrane. Black cumin – contains nigelon (nigella sativa), a substance that stimulates the gland , helps to strengthen the immune system. Ingredients: date syrup, starch syrup, cedar resin in cedar oil, vitamin C (ascorbic acid), black cumin seeds, sugar, citric acid. Energy value per 100 g of product: 390 Kcal / 1630 KJ Nutritional value in 100 g of product: carbohydrates 97.0 g. Net weight: 10 lozenges by 3.2 g. Tech. specifications Blister pack of 32 g. 10 lozenges, 3.2 g each.

Cellular polycarbonate for covering greenhouses Actual! Bio

Unique LIGHT-transforming polycarbonate ACTUAL! Bio with bio layer. Protects plants in the greenhouse from the vagaries of the weather and increases productivity thanks to the bio-layer! Tests of the State Scientific Institution TatNIISH of the Russian Agricultural Academy have proved that ACTUAL! Bio increases the yield up to 2.5 times, the content of vitamins up to 1.5 times. ACTUAL! Bio means: – up to 2.5 times more yield, – high light transmission (up to 88%), – heat saving (1.5 times "warmer" than glass), – 20 times stronger than glass, – 20 years of service ( 10 years warranty from the manufacturing plant), – does not turn yellow (protected by a UV protective layer) Assortment: Thickness: 4mm, 6mm, 8mm, 10mmSize of sheets: 2.1m * 6m; 2.1m * 12m Accurate prices for a specific product can be obtained from dealers in your city For more information: www.actual.safplast.ru Dealer addresses in your city: www.actual.safplast.ru Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district , highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected]

Cell polycarbonate according to GOST (Cell polycarbonate)

Warranty 14 years (confirmed financial responsibility of the manufacturer according to the Declaration of Quality Assurance). Range: Thickness from 4 to 32mm with multi-layer X-shaped structure. 12 standard colors. Polycarbonate sheets from various manufacturers differ in quality and shelf life, which is a key factor for structural building material. Polycarbonate is exposed to the environment, namely solar radiation, and if the sheets are not protected with a special UV layer of optimal thickness, then after two or three years the material will collapse. Novattro sheets have a guaranteed service life of at least 14 years for the Novattro brand, which is confirmed by the test reports in the aging chamber at GUP NII Mosstroy and ACADEM-SIB LLC. Ask the dealers in your city for the exact prices for a specific product. safplast.ruAddresses of dealers in your city: http://safplast.ru/buy/ Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district, highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected] Tech. Specifications Standard sheet size: 2100 * 6000mm, 2100 * 12000mm Thickness: 4mm, 6mm, 8mm, 10mm, 16mm, 20mm, 25mm, 32mm

Monolithic Novattro polycarbonate

Monolithic Novattro polycarbonate is produced in compliance with all technological parameters necessary to create a high-quality material. 14-year warranty (confirmed financial responsibility of the manufacturer according to the Declaration of Quality Assurance). Estimated service life is more than 20 years. Range: Thickness from 1 to 12 mm (0.3-15 mm on request); colors: transparent, white, opla, bronze light and dark, as well as corrugated sheets Novattro Prism.Novattro FR – sheets of monolithic polycarbonate of flammability group G1 for use at facilities with increased requirements for fire safety. Novattro FR is a self-extinguishing material that does not form melt droplets during combustion (basic requirements for the material of group G1), but at the same time retains transparency. Novattro monolithic polycarbonate is a shock-resistant polymer glass in accordance with GOST R 51136 "Safety glasses". This is the only monolithic polycarbonate in Russia that has received official tests in accordance with GOST R 51136 "Protective glasses" and has received the highest protection classes for shock resistance and penetration resistance A3 and B3. Polycarbonate does not break into fragments, which are the main cause of massive injuries. Find out the exact prices for a specific product from the dealers in your city For more information: http://safplast.ru Dealer addresses in your city: http://safplast.ru/buy/ Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district , highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected]

Novattro polycarbonate thermal washers

The NOVATTRO polycarbonate thermal washer allows to take into account the thermal expansion of polycarbonate sheets when it is necessary to fasten the sheet to the structure using self-tapping screws. Without taking into account thermal expansion with a temperature difference, expansion of the sheet (change in geometric dimensions) can lead to the destruction of the attachment point. Ask the dealers in your city for the exact prices of a specific product. Bulk packaging: 1 box = 10 packages of thermal washers (50 pcs.) = 500 More information on: www.safplast.ru Dealers' addresses in your city: http://safplast.ru/buy/ Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district, highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected]

Novattro polystyrene

Polystyrene sheets (PS) are polymeric solid sheets obtained by extrusion of polystyrene granules; SafPlast LLC produces sheets of general purpose polystyrene – GPPS (general purpose polystyrene) – transparent, shock-resistant. The main advantage of polystyrene sheets is the lower price range compared to most analogues (acrylic, polycarbonate, etc.). At the same time, the general complex of consumer properties (physical, mechanical and optical indicators, the possibility of mechanical and thermo-vacuum processing, the physiological safety of the material) meets the requirements of the areas of application of the material. Fields of application: lighting technology – as light diffusers, advertising and lighting structures, interior and sanitary partitions Thicknesses: 1.5mm – 3mm Colors: transparent, opal, transparent Prism Check the exact prices for a specific product from dealers in your cityMore information at: http: //safplast.ru dealers in your city: http://safplast.ru/buy/ Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district, highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected]

diffusers for lamps

Polystyrene, monolithic polycarbonate and acrylic glass Novattro opal and Novattro Prism with corrugated prism surface have uniform light diffusion, high light transmittance and durability. This makes Novattro Prism sheets a unique material for the production of modern durable LED lighting fixtures, as well as for the creation of non-standard designer exterior and interior solutions. http: //safplast.ru Addresses of dealers in your city: http://safplast.ru/buy/ Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district, highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected]

PET sheets

APET. GPET. PET-GAG0.3mm – 4mm (12mm) 1.25 * 2.05 mm 3.05 * 2.05 mm Ask the dealers in your city for the exact prices for a specific product More information at: http: //safplast.ru Dealer addresses in your city: http://safplast.ru/buy/ Manufacturer's contact: SafPlast LLC, Russia, Tatarstan, Vysokogorsky district, highway M-7, 806 km. (2 km south of the village of Makarovka), tel. (843) 233-05-33, e-mail: [email protected]

Beaker 250 ml

The low beaker is designed as a universal glassware: it can be used for evaporation of liquids, preparation of solutions, filtration, chemical reactions, short-term storage of liquids or powders, as a receiver during distillation. Easy-to-read graduated scale is available in all sizes from 100 ml to 5000 ml. made of high-strength borosilicate glass in accordance with GOST 25336-82 and ISO 3819. High resistance to chemical reactions and thermal shock. Convenient spout ensures optimal pouring of liquids.

Weighing cup, low, 40 ml
High laboratory glass, 250 ml, without spout
Round bottom flask, 500 ml
Low laboratory glass, 250 ml, with spout
Beaker with a thermostatic jacket, 600 ml

They are used in biological and chemical reactions that require maintaining a certain temperature, for example, during titration, decomposition by enzymes, organic synthesis reactions. The wide open throat provides convenient access to the resulting concentrated substance. Ideal for gentle and uniform heating or cooling of the contents of the vessel due to the double walls of the product and the possibility of continuous circulation of liquid inside the jacket. Made of chemically and thermally resistant borosilicate glass, allowing operation in a wide temperature range of 􁃩 to + 300 ° C. Equipped with diametrically located olives for connecting to a thermostat with 10 mm hoses inner diameter …

Tall weighing cup, 50 ml
Round-bottom flask with thin section, 500 ml
Oats

Oilseed rape in accordance with GOST 10583-76 Moisture – 6%. Weed impurity – 2%. Oil content – 41-49%. Origin – Russia. Terms of delivery: EXW, FOB, CIF. Form of payment – by agreement. Vintage 2018.

Lentils red and green

Lentils red and green GOST Russia 7066-77 Grain admixture – 2% Weed admixture – 3% Moisture – 14% Packing – 40'DC, bags, big bags. Delivery – EXW, FOB, CIF Payment – by agreement.

Feed corn

Yellow corn in accordance with GOST Russia, Moisture – 13% Protein – 8.2% Weed admixture – 3% Grain admixture – 12-15% Production – Russia Volume – from 1,000 tons Delivery – EXW, FOB, CIF

Alfalfa hay

Alfalfa hay (made in Russia) in rolls (350kg / roll), natural hay making with the following characteristics: Protein – not less than 10%, Nutrient feed units – not less than 0, 63, Moisture content – 14-16%. Production – Russia. Packing – in bales. Terms of shipment – self-pickup, FOB, CIF Location: Altai Territory, Omsk Region, Novosibirsk Region, Tver Region. Price on the spot – 5,200 rubles / ton. The minimum batch is any. For fattening domestic animals (cows, goats, sheep, horses, chickens, etc.)

Oilseed rape

Oilseed rape GOST 10583-76 Oil content – 41-49% Moisture – 6%. Weed mixture – 2%. Origin – Russia. Form of payment – by agreement. Delivery terms – EXW, FOB, CIF.

Barley

Food and fodder barley, harvest of 2018. Packing – in bulk. Delivery – EXW, FOB, CIF. Terms of payment – by agreement.

Wheat 3kl

Wheat – 3kl, 4kl, 5kl, food and fodder, in accordance with GOST. Delivery – EXW, FOB, CIF. Origin – Russia. Mass fraction of protein – 11-12%. Nature – 750 g / l. Moisture – 13.5%. impurity – 1.4%. Grain impurity – 3, 8%. Shipment – in bulk. Terms of payment – by agreement.

Horse peat for agricultural needs
Rubber crumb for construction

Rubber crumb, fractions: 2-4 mm, 1-2 mm, 0-1 mm. Packed in bags of 25 kg, or in big bags of 600-800 kg. We can discuss the use of your packaging.

Basalt mesh

Basalt mesh consists of perpendicularly connected threads of basalt fiber with the addition of a binder that increases strength and adhesion. Basalt fiber has high tensile strength and low thermal conductivity, and is also resistant to aggressive environments. That is why basalt mesh is increasingly used for reinforcement in the construction of buildings and roads. The use of building basalt mesh for masonry walls provides reliable protection against cracks and other deformations. Road basalt mesh allows several times to increase the service life of the roadway. Advantages over metal mesh 1. The cost of basalt mesh is almost a third lower. 2. Basalt mesh does not conduct electricity and is inert to magnetic radiation. 3. Thermal conductivity is almost a hundred times lower than that of 4. Basalt mesh is several times stronger, despite the equal diameter of the reinforcement. 5. The mass of the basalt mesh is 4-5 times less than metal. 6. Extremely resistant to temperature extremes, rust and moisture. works for the reinforcement of large-format bricks, porous stone, foam blocks, gas silicate blocks, as well as for bonding work when connecting the outer (facing) and inner (bearing) layers of the wall

Glass Composite Reinforcement

Composite reinforcement – non-metallic rods made of glass, basalt, carbon or aramid fibers, impregnated with a thermosetting or thermoplastic polymer binder and hardened. For adhesion to concrete, special ribs are formed on the surface of composite reinforcement during the production process or a sand coating is applied. Composite reinforcement is produced in the range of diameters 3-32 mm. It is lighter than steel reinforcement from 3 to 9 times depending on the diameter, easily bends in working conditions at low temperatures, does not corrode, there is no heat and electrical conductivity, and also has a guaranteed service life up to 80 years (for steel rebar maximum 50) .Characteristics of glass composite rebar Diameter: 3-32 mm; Length: up to 12m; Tensile strength: 1000-1200 MPa; Modulus of elasticity: 50000-55000 MPa; Density: 2g / cm3; Coefficient of thermal conductivity: <0.46 W; Elongation factor: 2.2%; Electrical conductivity: dielectric; Corrosion resistance: very high; Limiting operating temperature: 119 C; Compliance with regulatory documents Interstate standard GOST 31938-2012. Composite polymer fittings for reinforcing concrete structures. General Specification (ISO 10-406-1: 2008, NEQ) Fields of Application of Composite Reinforcement Fiberglass rebar will be an ideal base for concrete and brick structures. It is used in the creation of supports for power lines and lighting, in the construction of road, sidewalk and fence plates, as well as in the construction of sleepers on railway tracks. Those. specifications Characteristics of glass composite reinforcement Diameter: 3-32 mm; Length: up to 12m; Tensile strength: 1000-1200 MPa; Elastic modulus: 50000-55000 MPa; Density: 2g / cm3; Thermal conductivity: <0.46 W; Elongation coefficient: 2.2%; Electrical conductivity: dielectric; Corrosion resistance: very high; Limiting operating temperature: 119 С;

Baths and houses from rounded and hewn logs

All houses and saunas are made exclusively according to the individual project of the client. Those. specifications Product parameters for export shipment are calculated individually for each specific project (weight of the structure in tons, volume for loading into a container in cubic meters, equipment, etc.). The price for delivery and production will be immediately presented at the individual request of the client. By default, the units of measurement of the cargo are indicated based on the parameters of a bath / house measuring 6 * 6 m with a ceiling height of 2.5 m. foot containers.

Charcoal for household needs

High-quality charcoal, coarse fraction with excellent properties of rapid combustion without chemical raw materials in accordance with GOST 7657-84. CHARCOAL IS MADE FROM BIRCH, CONIFEROUS WOOD AND MIXED FOREST. USED IN HOUSEHOLD FOR PREPARING BBQ, SHALIKS, SEAFOOD AND GRILLED VEGETABLES Tech. specifications Specifications in accordance with GOST 7657-84

Charcoal for household needs

High-quality charcoal, coarse fraction with excellent properties of rapid combustion without chemical raw materials in accordance with GOST 7657-84. CHARCOAL IS MADE FROM BIRCH, CONIFEROUS WOOD AND MIXED FOREST. USED IN HOUSEHOLD FOR PREPARING BBQ, SHALIKS, SEAFOOD AND GRILLED VEGETABLES Tech. specifications Specifications in accordance with GOST 7657-84

Birch firewood for household needs

If necessary, firewood can be dried in a special chamber to a moisture content of 18-20%. Firewood can be packed in wooden boxes or in 40 liters (15kg) nets. The nets are placed on a 2.66 m high pallet (about 70 nets per pallet).

Pressure transducer Sapphire-22M
Pressure transducer series "Sapphire-22M-Ts" digital
Pressure transducer series "Sapphire-22M-Ts" digital
Pressure transducer Sapphire-22M-MP

APPLICATION: In systems of automatic control of regulation and control of technological processes in chemical, petrochemical and oil refining industries, in the fields of thermal energy, water management, gas distribution networks, as well as at nuclear power facilities. Those. specifications Upper limits of pressure measurement – absolute 2.5 kPa … 16 MPa – overpressure 0.16 kPa … 100 MPa – differential 0.16 kPa … 16 MPa – overpressure – vacuum 0.08 kPa … 2.4 MPa – rarefaction 0.16 … 100 kPa Depth of range readjustment 10: 1 Output signal 0 … 5; 4 … 20; 5 … 0; 20 … 4 mA Degree of protection IP65 3-key keypad yes Reduced error ± 0.15%; ± 0.25%; ± 0.5% Overload capacity up to 200 … 300% of the indicator of the indicator

Pressure transducer Sapphire-22MT
Pressure transducer Sapphire-22M
Pressure converter Sapphire-22M-Ts
Pressure sensor MT101-E

APPLICATION: In autonomous telemetry systems and automatic control of technological processes in gas distribution networks, etc. Tech. specifications Upper limits of pressure measurement – absolute 25 kPa … 1.6 MP – excess 2.5 kPa … 100 MP – differential 0.16 kPa … 16 MP – pressure-vacuum ± 3 … ± 80 kPa-0, 1 … (+ 0.15 … + 3.9) MPa-vacuum-3 kPa …- 100 kPa Version 1 * 0.16 kPa … 16 MPa Version 2 * 16 kPa … 2.5 MPa Output signal 0.4 … 2 V Reduced error ± 0.15%; ± 0.2%; ± 0.25%; ± 0.5% Degree of protection IP65 Versions – general industrial – explosion-proof * Execution with increased overload

Pressure sensor MT101-M1

APPLICATION: In systems of automatic regulation and control of technological processes in chemical industries, oil refining, thermal energy, water management, gas distribution networks, etc. Tech. specifications Upper limits of pressure measurement – absolute 40 kPa … 40 MP – excess 4 kPa … 100 MP – differential 0.16 kPa … 16 MP – pressure-vacuum ± 3 … ± 80 kPa -0.1 … (+0.15 … + 3.9) MPa Output signal 4 … 20 mA; 0 … 10 V; 0 … 5 V; 0.5 … 4.5 V Reduced error ± 0.15%; ± 0.2%; ± 0.25%; ± 0.5% Degree of protection IP65 Overload up to 200% FS

Drilling rig SBSH 250 MNA-32
Drilling rig SBSh 270
roar GIT 700K
Roar GST-61
Drilling rig SBSh 250D
Drilling rig SBSH 160D
Mine car VS-30
Mine car 5VS 15M
Mine car 5VS 15M
Roar GIL-52L
roar GIT-42M
Still drinking water 2.0l

Water "Rodnik", treated with an ozonizer with subsequent restoration of the structure of water "Akvadisk", in its structure is close to natural (spring) and can be recommended for everyday use as drinking water and for cooking. So, according to the research results, its activity coefficient was 1.4 / 139.59. Waters that have been processed by the device for transforming the structure of water "Akvadisk" (ie, having an OKA of at least 1.0 / 100.0), when consumed in its raw form, have a positive effect on the human body. Those. specifications Indicators of salt composition: Total mineralization <500 mg / l Hardness <7 ° CALcium <130 mg / l Magnesium <65 mg / l Potassium <20 mg / l Hydrocarbonates <400 mg / l Sulfates <250 mg / l Chlorides <250 mg / l

Still drinking water 1,5l

Water "Rodnik", treated with an ozonizer with subsequent restoration of the structure of water "Akvadisk", in its structure is close to natural (spring) and can be recommended for everyday use as drinking water and for cooking. So, according to the research results, its activity coefficient was 1.4 / 139.59. Waters that have been processed by the device for transforming the structure of water "Akvadisk" (ie, having an OKA of at least 1.0 / 100.0), when consumed in its raw form, have a positive effect on the human body. Those. specifications Indicators of salt composition: Total mineralization <500 mg / l Hardness <7 ° CALcium <130 mg / l Magnesium <65 mg / l Potassium <20 mg / l Hydrocarbonates <400 mg / l Sulfates <250 mg / l Chlorides <250 mg / l

Still drinking water 5.0l

Water "Rodnik", treated with an ozonizer with subsequent restoration of the structure of water "Akvadisk", in its structure is close to natural (spring) and can be recommended for everyday use as drinking water and for cooking. So, according to the research results, its activity coefficient was 1.4 / 139.59. Waters that have been processed by the device for transforming the structure of water "Akvadisk" (ie, having an OKA of at least 1.0 / 100.0), when consumed in its raw form, have a positive effect on the human body. Those. specifications Indicators of salt composition: Total mineralization <500 mg / l Hardness <7 ° CALcium <130 mg / l Magnesium <65 mg / l Potassium <20 mg / l Hydrocarbonates <400 mg / l Sulfates <250 mg / l Chlorides <250 mg / l

Still drinking water 1.0l

Water "Rodnik", treated with an ozonizer with subsequent restoration of the structure of water "Akvadisk", in its structure is close to natural (spring) and can be recommended for everyday use as drinking water and for cooking. So, according to the research results, its activity coefficient was 1.4 / 139.59. Waters that have been processed by the device for transforming the structure of water "Akvadisk" (ie, having an OKA of at least 1.0 / 100.0), when consumed in its raw form, have a positive effect on the human body. Those. specifications Indicators of salt composition: Total mineralization <500 mg / l Hardness <7 ° CALcium <130 mg / l Magnesium <65 mg / l Potassium <20 mg / l Hydrocarbonates <400 mg / l Sulfates <250 mg / l Chlorides <250 mg / l

Still drinking water 0.5l

Water "Rodnik", treated with an ozonizer with subsequent restoration of the structure of water "Akvadisk", in its structure is close to natural (spring) and can be recommended for everyday use as drinking water and for cooking. So, according to the research results, its activity coefficient was 1.4 / 139.59. Waters that have been processed by the device for transforming the structure of water "Akvadisk" (ie, having an OKA of at least 1.0 / 100.0), when consumed in its raw form, have a positive effect on the human body. Those. specifications Indicators of salt composition: Total mineralization <500 mg / l Hardness <7 ° CALcium <130 mg / l Magnesium <65 mg / l Potassium <20 mg / l Hydrocarbonates <400 mg / l Sulfates <250 mg / l Chlorides <250 mg / l

Regenerating foot scrub gel

Unique double effect of peeling and regeneration at the same time. Microgranules of polyethylene actively remove the corroded layers of the epidermis without injuring it. The balanced complex of amino acids, elastane, collagen and hyaluronic acid has a powerful regenerating and moisturizing effect. Recommended for resurfacing the skin of the feet in professional pedicure procedures and maintaining the elasticity and smoothness of the feet in home care. In pedicure procedures.

Callus softener EXPRESS

Effectively and quickly loosens and softens rough skin and calluses, which can then be easily removed with a professional file or sand cutter. It is used in express procedures in various pedicure techniques. The procedure is carried out with gloves. Avoid contact with cracks and damaged skin areas. For professional use only. It is used in express procedures in various pedicure techniques

Prophylactic carbamide keratolytic

It is used for feet with hyperkeratosis. A new generation of safe urea keratolytics. Effectively loosens and softens calluses and rough skin areas for easy removal. Keratolytic is safe for living tissues, speeds up the procedure for treating the foot with any type of pedicure. Contains Methylene Blue, used to prevent fungal infections. Can be used for diabetic feet. Suitable for hardware, classic and SPA pedicure.

Callus softener delicate

The main active ingredient is soda, which is traditionally used as an effective safe keratolytic. The formula is fortified with caustic soda and EDTA. The cellulose layer attaches the active ingredients to the skin like a plaster. This allows the deeper layers of keratin to be denatured. The gel delicately softens rough skin and corns, which can then be easily removed with a professional file or a sand cutter. Designed for hardware and classic pedicure. To enhance the effect, it is recommended to use in combination with INKI urea keratolytics

Regenerating foot skin care gel

The gel has a nourishing, regenerating and moisturizing effect. Actively heals cracks, prevents the formation of corns and excessive dryness of the skin. Comfortable and economical to use. Recommended for use in professional pedicure procedures and for maintaining the health and elasticity of the skin of the feet and nails in home care. Two-phase product, does not contain emulsifiers and parabens. Recommended for use in professional pedicure procedures and for maintaining the health and elasticity of the skin of the feet and nails in home care.

Honey

It is packed in a bank of glass and plastic boxes from 250g to 23kg.Honey is certified in the German and Swiss laboratoriesUsed in food, treatment, cosmetics, confectionery and beverages

Honey in sashets

Show box 540g (30 packages sachets x 18g) = 6.0 USD1pcs (18g) = 0,2 USDParty minimal -20000 show boxes (600000 packages sachets)Health and longevity!

Potato granules (Mashed potatoes dry)

Raw material: PotatoesAppearance: flakes, grits, flourColor: White to yellow, uniform throughout the mass, typical of potato varietiesOdour: Characteristic potatoes (organoleptic definition)Taste: Characteristic of potatoes without foreign flavor (organoleptic definition)Humidity: 12% maxPacking: four-layer paper with polyethylene liner 17 and 20kg.To prepare mashed potato mix 100 g flakes and 550 ml. water.From 100g flakes obtained 600g ready-to-eat mashed potatoes.We can bring them up to 500 tons per month.This allows you to make mashed potatoes 3500000 servings of ready meals weighing 500g.Made from high-quality, mature potatoes, without GMOIt used in the preparation of mashed potatoes as a side dish, potato fillings and snacks, as an additive in baking bread.Consumers: Companies catering: canteens school, college, work; in the Army, Police, Ministry of Emergency Situations; Shift workers, nomads, shepherds, hunters and fishermen; in hospitals and clinics;refugee camps, humanitarian assistance and the personal consumption of citizensThe use of potato powders and flakes in baking and confectionery industry thus expanding the range of products and give them an unusual taste and increase shelf life. Тех. спецификации Ingredients: Potato granules (mashed potato powder) not less than 99%Humidity: 12% maxPacking: four-layer paper with polyethylene liner 17 and 20kg.Storage: in a clean, dry, well-ventilated area away from direct sunlight and strong-smelling substances, relative humidity less than 75%Shelf life: 3 years in leaky packaging5 years in a pressurized packOn the pallet 33 bags (561 and 660 kg)

Oatmeal porridge with berry slices

The contents of the package are filled with hot water and after 4 minutes the porridge is ready for use1 corrugated box 1900g (50pcs x 37g) = 10 USDRange:Oatmeal porridgeOatmeal porridge with strawberryOatmeal porridge with cherryOatmeal porridge with apricotOatmeal porridge with cranberryOatmeal porridge with raspberryOat porridge with forest berriesHealth and enjoyment of taste!

Jelly with pieces of fruits and berries in natural juice

Jelly with pieces of fruits and berries in natural juice “Kiselica” 7 PCs./30 gr. in a cardboard box.cranberryraspberryblack currantblueberryberry platterFill the contents of the package with boiling water.After 4 minutes, the juice is ready for use.Joy of taste and health!

Fire-fighting tank truck АЦ-7,0-40 / 4 (43118)

Designed to deliver personnel, fire equipment to the fire site, carry out actions to extinguish fires in forests, cities and other settlements and carry out emergency rescue operations. The convenient design of the cabin provides accommodation for a combat crew in the amount of 7 people (including the driver). Those. specifications TECHNICAL CHARACTERISTICS Base chassis KamAZ – 43118 Wheel arrangement 6×6 Engine power, kW (hp) 221 (300) Engine type diesel Fuel type DTFighting crew, pers. 7 (6 + 1) Water tank capacity, l 7000 Foam tank capacity, l 600 Type of fire pump used NCPK-40 / 100-4 / 400 Nominal flow (normal pressure stage), l / s 40 Nominal flow (high pressure stage), l / s 4 Nominal head (normal pressure stage), m.w. Art. 100 Nominal head (high pressure stage), m.w. Art. 400High pressure hose line SRVDK-2 / 400-60 Location of the fire pump Rear Vacuum system AVS-01EN Highest suction height, m 7.5 Full name of the tank truck AC-7.0-40 / 4 (43118) Possibility to install the "integrated NATISK" option is

Fire-fighting tanker AC-SPK-5,0-40 (43118)

The volume of the received fire-extinguishing substances is up to 100,000 liters. Continuous operation of the barrel "A" from its own capacity – up to 40 minutes! The area for extinguishing flammable and combustible liquids with compression foam with a standard intensity of 0.027 l / (sq. * S) – 500 sq. m.! Automatic maintenance of the multiplicity regardless of the flow rate and pressure! System control is easier than a regular smartphone! Those. specifications CHARACTERISTICS OF THE NATISK SYSTEM: Compression foam system NATISK-800KS Air compressor drive from the chassis transmission Working pressure 3-10 atm Maximum solution flow 800 l / min Range of the jet from the manual barrel up to 35 m Maximum compressed air consumption 4 600 l / min Rate 5-20 Foam concentrate dosage 0.6 – 6% Manual barrel inner diameter 25 mm (3 pcs) Volume of produced foam from 25,000 liters ("wet foam") to 100,000 liters ("dry foam") TECHNICAL CHARACTERISTICS: Basic chassis KAMAZ-43118 Wheel arrangement 6×6 Engine power 300 hp .Ecological class Euro-5 Combat crew 6 people Water tank 5,000 l Foam tank 300 l Fire pump NTsPN-40/100 Unique nature of the NATISK system: – reduction of extinguishing time up to 7 times – reduction of spills to a minimum – minimal risk of re-ignition – height of supply of extinguishing agents – up to 250 meters – the safety of the owner – reliable protection of horizontal and VERTICAL surfaces from the spread of fire – environmental friendliness – confident exploitation weathering at low temperatures (-60 C)

Fire-fighting tanker with foam injection by compression method AC-SPK-3,0-40 (5557)

Fire tanker AC-SPK-3,0-40 (5557) with NATISK system (own development of the Spetsavtotekhnika fire-fighting vehicle plant) is intended for delivery of combat crew and fire-fighting equipment to the place of fire. 3.0-40-NATISK (5557) allows you to get up to 60,000 liters of extinguishing agents. The cab of the tanker is designed for 7 people (including the driver) of the combat crew. In the cockpit of the crew there are two rows of seats for the crew, with mounts for breathing apparatus built into the seat backs. Those. specifications TECHNICAL CHARACTERISTICS: Base chassis URAL – 5557 Wheel arrangement 6×6 Engine power, h.p. 230 Diesel engine type Overall dimensions, mm 8695х2500х3100 Combat crew, persons 7 Water tank capacity, l 3000 Foaming agent capacity, l 180 TECHNICAL CHARACTERISTICS OF THE NATISK SYSTEM: Technology of high-efficiency compression foam supply (Foam volume produced, l from 15,000 to 60,000) (wet) foaming agent,% 0.2-6.0 Foam consumption, l / s 50 Range of foam feeding through the manual barrel, m up to 40 m Number of barrels supplying foam 2 Number of barrels supplying water 2 Air reserve for foaming is unlimited Diameter of hose lines, mm 51 Length of hose lines, m 400 UNIQUE SYSTEMS "NATISK": – reduction of the extinguishing time by up to 7 times – reduction of spills to a minimum – minimal risk of re-ignition – range of supply of fire extinguishing agents – up to 40 meters – work at low temperatures (up to – 50 ° C) – safety of the operator – reliable protection of horizontal and VERTICAL surfaces from the spread of fire – instant deployment at the fire site – ecol ogichnost – the ability to work with a small number of combat crew – ease of pressure hoses with foam – increased radius of action (small pressure losses) – the ability to supply along a vertical pressure line to a height of 250 m Extinguishing all types of fires: – in an apartment building of any number of storeys – in a cottage building – in forests – in business buildings – at industrial enterprises – at facilities of the gas and petrochemical industry

Fire-fighting tanker AC-SPK-1,0-40 (С42R33)

A fire-fighting tanker with a foam compression method (NATISK system) АЦ-SPK-1,0-40 (С42R33) is intended for delivery of personnel and fire-fighting equipment to the fire site, carrying out actions to extinguish fires with water and / or compression foam, carrying out rescue operations in cities and other settlements, at enterprises of the petrochemical industry and in places where oil products are stored. AC can be operated in temperate climates on all types of roads. Those. specifications TECHNICAL CHARACTERISTICS: Basic chassis GA3-С42R33 Wheel arrangement 4 x 2 / rear Engine power, h.p. 109.5 Diesel engine type Overall dimensions, mm 7500x2350x3000 (dimensions may vary depending on the AC version) Combat crew, persons 7 Water tank capacity, l 1000 Foam concentrate capacity, l 60 TECHNICAL CHARACTERISTICS OF THE "NATISK" SYSTEM: Technology of high-performance compression foam supply, l from 5000 (wet foam) to 20,000 (dry foam) Foaming agent dosing,% 0.6 – 6 Foam consumption, l / s up to 25 Foam feeding range through the manual barrel, m up to 30 Number of barrels supplying foam 1 Number of barrels supplying water 1 Air supply per foaming is unlimited Diameter of hose lines, mm 51 Length of hose lines, m 200 UNIQUE OF THE NATISK SYSTEM: – reduction of extinguishing time by up to 7 times – reduction of spills to a minimum – minimal risk of re-ignition – range of supply of extinguishing agents – up to 30 meters – operation at low temperatures (up to – 50 ° C) – safety of the owner – reliable protection of horizontal and VERTICAL surfaces from the spread of fire ara – instant deployment at the fire site – environmental friendliness – the ability to work with a small number of combat crew – lightness of pressure hoses with foam – increased radius of action (low pressure losses) – the ability to supply along a vertical pressure line to a height of 250 m EXTINGUISHING ALL KINDS OF FIRE: – in an apartment building a house of any number of storeys – in a cottage building – in forests – in business buildings – at industrial enterprises – at facilities of the gas and petrochemical industry

Fire tank truck АЦ-5,0-40 (43253)

Designed to deliver personnel, fire equipment to the fire site, carry out actions to extinguish fires in forests, cities and other settlements and carry out emergency rescue operations. The convenient design of the cabin provides accommodation for a combat crew in the amount of 7 people (including the driver). Those. specifications TECHNICAL CHARACTERISTICS Base chassis KamAZ – 43253Wheel formula 4x2Engine power, kW (hp) 150.3 (204) Maximum speed, km / h 90 Engine type diesel Fuel type DTFighting crew, pers. 7 Overall dimensions, mm 7700х2500х3100 Water tank capacity, l 5000 Foam tank capacity, l 300 Full name АЦ-5,0-40 / 100 (43253) TECHNICAL FEATURES The cab consists of two parts: front, rear. The front and rear parts have an audiovisual connection through the window opening, which is sealed automatically when the front cab is moved to the transport position. Access to the power unit is provided with the standard lifting of the front of the cab. The second cabin is heated by an autonomous heater. Capacious compartments for fire-fighting equipment provide the possibility of extended configuration. The pump is driven by the car engine through a power take-off and cardan drive. The initial filling of the suction line and pump when water is taken from the reservoir is carried out by a vacuum system. Possibility of operation in regions with a temperate climate at an ambient temperature from minus 40 to plus 40 ° С.

Semi-submersible pumps

They differ in such advantages as: – electricity – sealed design – no leaks, no pollution to the environment – unloaded flow path – increased reliability – mud design – installation of an upstream multiphase wheel (auger) is possible This equipment can be manufactured in a sealed design (pump seal – magnetic coupling), which eliminates the leakage of the pumped liquid. Due to the unique flow path and the used VNL type alloys (high-strength stainless casting), the efficiency of the pumps reaches 80%, and the service life of the parts increases by 1.5 – 2 times in comparison with steel 20X13. Those. specifications Consumption, m3 / hour: from 1 to 500. Head, m: from 10 to 3000. Seal: double face / magnetic coupling.

Borehole pumps

Designed for the extraction of Cenomanian water from water wells. They have such advantages as: energy saving unloaded flow path wear-resistant design tungsten carbide pump bearings are equipped with a pad electric motor and a protector, axial support in the Tech. specifications Consumption, m3 / hour: from 1 to 300. Head, m: from 15 to 1000.

Borehole pumps

Designed for the extraction of Cenomanian water from water wells. They have such advantages as: energy saving unloaded flow path wear-resistant design tungsten carbide pump bearings are equipped with a pad electric motor and a protector, axial support in the Tech. specifications Consumption, m3 / hour: from 1 to 300. Head, m: from 15 to 1000.

Vertical pumps

The vertical design of the pump significantly reduces the static and dynamic loads on the radial bearings. The noise and vibration level of vertical pumps is significantly lower; vertical pumps have a long service life. Vertical pumps can be installed with little or no foundation. For vertical units, the alignment of the motor and pump shafts has been greatly simplified. To create high pressures and heads, a series connection of pumps is used. Equipping the unit with a control station with a frequency converter increases the unit's overload protection. The use of a frequency converter allows you to flexibly adjust the parameters of the unit to the needs of operation and will allow you to correct possible errors made in the selection of equipment. The flow path is hydraulically unloaded from axial forces. Installation of an upstream multiphase wheel (auger) is possible. Advantages: energy saving; increased reliability; sealed execution; there are no leaks; the environment is not polluted. Those. specifications Consumption, m3 / hour: from 1 to 500. Head, m: from 10 to 3000. Seal: double face / magnetic coupling.

Booster pumps

The pump design significantly reduces static and dynamic loads on radial bearings. The level of noise and vibration of vertical pumps is significantly lower, booster pumps have a long service life. They differ in such advantages as: – energy saving – sealed design – no leakage, no environmental pollution – the flow path is unified with the central nervous system pump of the PPD system – increased reliability – not required alignment, capital foundation – it is possible to install an upstream multiphase wheel (auger) Tech. specifications Consumption, m3 / hour: from 45 to 300. Head, m: from 100 to 200. Seal: double face.

Thermoelectric installation Warm Stream-1VP

One of the factors complicating the operation of downhole equipment in most of the fields is the high content of asphaltenes, resins and paraffins, as well as the increased viscosity of the produced fluid, which leads to well failure, the need to perform their premature workover and an increase in production costs. "Is intended for thermal action on the fluid in order to reduce its viscosity, prevent ARPD and hydrate formation along the bore of oil production wells and freezing of water in artesian and injection wells. The main task of the unit and the main difference from other heaters is the controlled maintenance of the temperature of the produced fluid flow by 3-5 degrees above the temperature of oil saturation with paraffin. At the same time, the power consumed by WARMSTREAM-1VP is significantly lower than the power that would have to be applied to melt the wax. 1. "WARM STREAM-1VP" with placement outside or inside the tubing. It is successfully used in oil wells to prevent the formation of asphalt-resinous and paraffinic deposits (ARPD) on the walls of tubing by increasing the temperature of the produced fluid, as well as in water intake and injection wells in order to prevent freezing. 2. "WARM STREAM-IN" induction type, is used on oil and water wells, flow lines, for heating Christmas trees and wellheads, as well as outlets from AGSU and oil-gathering reservoirs of various diameters located in areas with cold climates in order to prevent equipment freezing and produced fluid. The installation is characterized by minimal power consumption with a high efficiency, a good alternative to self-regulating cables. This equipment has proven itself and is successfully operated at the fields of PJSC Gazprom Neft, PJSC NK Rosneft, PJSC LUKOIL, PJSC NK RussNeft, Kazakhoil Aktobe LLP, Sistema-Service Group of Companies LLC, Novatek-Tarkosaleneftegaz LLC, Ukrnafta. The main advantages of using WARM STREAM installations: -high reliability in extreme conditions; -fast payback; -increase in the cleanup and turnaround time of the well ; -continuous heating of the well along the interval of deposits; -rejection of similar methods of dealing with paraffin; -heating of the transported fluid from the well and into the well; -reduction of the load on submersible pumps and pumps for oil production. Those. specifications On request. Detailed information in the presentation.

GNU pumps

The flow path is hydraulically unloaded from axial forces; It is possible to install an upstream multiphase wheel (auger); The residual axial force is perceived by the thrust chamber. Those. specifications Consumption, m3 / hour: from 1 to 500. Head, m: from 10 to 3000. Seal: double face / magnetic coupling.

Refrigeration unit S-50

Transport refrigeration unit for transportation of chilled and frozen products. Warranty – 3 years. Complete set, completely ready for installation. Those. specifications Performance: at 0 ° C – 5435 kW, at -20 ° C – 3400 kW. The volume of the van is 50 m3 (0 ° C), or 34 m3 (-20 ° C). Freon R404.

Refrigeration unit S-40

Transport refrigeration unit for transportation of chilled and frozen products. Warranty – 3 years. Complete set, completely ready for installation. Those. specifications Performance: at 0 ° C – 4620 kW, at -20 ° C – 2600 kW. The volume of the van is 35 m3 (0 ° C), or 26 m3 (-20 ° C). Freon R404.

Refrigeration unit S-30

Transport refrigeration unit for transportation of chilled and frozen products. Warranty – 3 years. Complete set, completely ready for installation. Those. specifications Performance: at 0 ° C – 3990 kW, at -20 ° C – 2300 kW. The volume of the van is 26 m3 (0 ° C), or 18 m3 (-20 ° C). Freon R404.

Refrigeration unit S-20

Transport refrigeration unit for transportation of chilled and frozen products. Warranty – 3 years. Complete set, completely ready for installation. Those. specifications Productivity: at 0 ° C – 2685 kW, at -20 ° C – 1900 kW. The volume of the van is 20 m3 (0 ° C), or 10 m3 (-20 ° C). Freon R404.

Refrigeration unit S-10 12 / 24V

Transport refrigeration unit for transportation of chilled and frozen products. Warranty – 3 years. Complete set, completely ready for installation. Those. specifications Productivity: at 0 С – 1950 kW, at -20 С – 1600 kW. The volume of the van is 12 m3 (0 С), or 6 m3 (-20 С). Freon R404.

Refrigeration unit S-10 12 / 24V

Transport refrigeration unit for transportation of chilled and frozen products. Warranty – 3 years. Complete set, completely ready for installation. Those. specifications Productivity: at 0 С – 1950 kW, at -20 С – 1600 kW. The volume of the van is 12 m3 (0 С), or 6 m3 (-20 С). Freon R404.

Gas analyzer of explosive gases and vapors multichannel SIGMA-1M

The installation and use of gas analyzers is necessary in accordance with the fire safety rules for the operation of chemical industry enterprises, the general explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refineries, and the requirements for the installation of alarms and gas analyzers. The stationary gas analyzer Sigma-1M is specially designed and used where constant monitoring is required. content of vapors of explosive compounds in air or nitrogen atmosphere. Gas analyzer Sigma-1M with convection supply of a controlled environment is designed for automatic measurement and control of pre-explosive concentrations of explosive gases and vapors with the formation of emergency light, sound and control signals when the concentration of the controlled gas exceeds a specified level. , B-Ia and B-Id according to the explosion protection marking ("[Exib] IIB" for the panel and "1ExibdIIBT4 X" for the sensors) and in accordance with the Operation Manual. The device is used in industrial plants where gas leakage or evaporation of flammable liquids is possible. These are gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

Gas analyzer of explosive gases and vapors multichannel SIGMA-1M

The installation and use of gas analyzers is necessary in accordance with the fire safety rules for the operation of chemical industry enterprises, the general explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refineries, and the requirements for the installation of alarms and gas analyzers. The stationary gas analyzer Sigma-1M is specially designed and used where constant monitoring is required. content of vapors of explosive compounds in air or nitrogen atmosphere. Gas analyzer Sigma-1M with convection supply of a controlled environment is designed for automatic measurement and control of pre-explosive concentrations of explosive gases and vapors with the formation of emergency light, sound and control signals when the concentration of the controlled gas exceeds a specified level. , B-Ia and B-Id according to the explosion protection marking ("[Exib] IIB" for the panel and "1ExibdIIBT4 X" for the sensors) and in accordance with the Operation Manual. The device is used in industrial plants where gas leakage or evaporation of flammable liquids is possible. These are gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

SIGMA-1M sensor with optical channel

Controlled gases and vapors: methane, propane, butane, pentane, hexane, propylene, cyclopentane, vapors of gasoline, kerosene, diesel fuel, white spirit, jet fuel, aviation gasoline, aviation fuel. Gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

Dosimeter - DRBP-03 radiometer

The dosimeter-radiometer "DRBP-03" is designed to measure the equivalent dose and equivalent dose rate of ionizing photon radiation, as well as the flux density of α-, β- radiation. It is designed as a base unit in a metal case with built-in detectors and a set of remote detection units. The device is completed with an extension bar and a battery charging unit. Advantages: operational control of the radiation situation (α-, β-, γ- radiation); wide range of measured values; portability It is used for operational dosimetric monitoring of the radiation environment; investigation of radiation anomalies; compilation of radiation maps of the area; detecting contamination of clothing, walls, floors, etc.

Monogase DMG-3 detector (CO, O2)

The CO detector is designed to detect the excess of the established thresholds for the content of carbon monoxide (OC) in the air of controlled premises. The O2 detector is designed to signal a lack of oxygen in the air. For example, in the residential sector of public utilities, garages of motor vehicles, closed underground parking lots, etc. When the threshold values of the concentration of the detected gas (or a decrease in the concentration of oxygen) in the monitored area are reached, the device switches to the emergency mode. (or warning) light alarm. Carbon monoxide detector is available in four versions: "DMG-3", "DMG-3M", "DMG-3R", "DMG-3MR". Oxygen detector: DMG-3K and DMG-3KR. DMG-3, DMG-3R have an operating temperature range from minus 10 to plus 50 ° СDMG-3M and DMG-3MR – have an operating temperature range from minus 40 to plus 50 ° СDMG-3K and DMG-3KR – an operating temperature range from 0 up to plus 40 ° C. All other technical characteristics of the detector versions are the same. Those. specifications Operating conditions of detector operation Ambient temperature, ° С from minus 10c to plus 50c for DMG-3, DMG-3R From minus 40c to plus 50c for DMG-3M, DMG-3MR From zero to plus 40C for DMG-3K, KR Relative ambient humidity at a temperature of 25 ° С,% to 80 atmospheric pressure, kPa from 84 to 106.7 (from 630 to 800 mm Hg) the content of corrosive agents is not higher than the permissible values for an atmosphere of type I (conditionally clean) according to GOST 15150-69 Main parameters. The method of sampling by the detector is diffusion. Operation mode is continuous. Detection range, mg / m3 from 0 to 250. Maximum permissible concentration level, mg / m3. 250. signaling, s, no more * 60 Current consumption, no more, A 0.03 Power consumption, V * A, no more than 6.6 Class of protection against electric shock BI (according to GOST IEC 61140-2012) Communication interface RS-485 Degree of protection of the enclosure: IP65 ( for civil defense ST 14254-2015) Overall dimensions, mm, no more than 120x104x55 Weight, kg, no more than 0.4

SIGMA-1M sensor with optical channel

Controlled gases and vapors: methane, propane, butane, pentane, hexane, propylene, cyclopentane, vapors of gasoline, kerosene, diesel fuel, white spirit, jet fuel, aviation gasoline, aviation fuel. Gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

SIGMA-1M sensor with optical channel

Controlled gases and vapors: methane, propane, butane, pentane, hexane, propylene, cyclopentane, vapors of gasoline, kerosene, diesel fuel, white spirit, jet fuel, aviation gasoline, aviation fuel. Gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

Gas analyzer of explosive gases and vapors multichannel SIGMA-1M

The installation and use of gas analyzers is necessary in accordance with the fire safety rules for the operation of chemical industry enterprises, the general explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refineries, and the requirements for the installation of alarms and gas analyzers. The stationary gas analyzer Sigma-1M is specially designed and used where constant monitoring is required. content of vapors of explosive compounds in air or nitrogen atmosphere. Gas analyzer Sigma-1M with convection supply of a controlled environment is designed for automatic measurement and control of pre-explosive concentrations of explosive gases and vapors with the formation of emergency light, sound and control signals when the concentration of the controlled gas exceeds a specified level. , B-Ia and B-Id according to the explosion protection marking ("[Exib] IIB" for the panel and "1ExibdIIBT4 X" for the sensors) and in accordance with the Operation Manual. The device is used in industrial plants where gas leakage or evaporation of flammable liquids is possible. These are gas stations, pumping stations, oil depots, gas and oil producing enterprises, as well as in small premises where there is a danger of gas leaks: utilities, warehouses of flammable liquids.

Explosive gas detector Signal - 022

The gas detector monitors, measures, records the values of pre-explosive concentrations of explosive hydrocarbon gases and vapors (methane, propane), concentrations of toxic audible alarms when preset threshold values are reached. (one gas to choose from) H2S (hydrogen sulfide) NH3 (ammonia), O2 (oxygen), CO (carbon monoxide), CH4 (methane), C3H8 (propane), CO2 (carbon dioxide), NO2 (nitrogen dioxide), SO2 ( SIGNAL-022 gas detector consists of a device with one built-in sensor for detecting gases, and one remote HP sensor connected to the external connector of the device. The transfer of information from an external sensor to the gas detector is carried out via USB The device provides for the possibility of installing remote sensors on the signaling device through an extension cable up to 6 m long, which is necessary when used, for example, to monitor the air in the working area during repair (hot) work in wells, cisterns, tanks and other closed objects. a method of sampling and an electrochemical or optical absorption method of measurement Capabilities of the Signal-022 gas detector Sound and light indication and alarm when the concentration threshold of the measured gas component is exceeded (for oxygen when decreasing). measured components of the gas mixture on the LCD display of the gas alarm control panel; Transfer of stored and measured data to a personal computer via USB; Enabling the mode of automatic saving of current readings in the log when the thresholds are exceeded and decreased By transferring the maximum value of the LCD indicator readings to the device memory at the operator's command. Selecting the dimension of the measured concentration for each channel. Charging the battery in no more than 3 hours. Switching off the device in case of overcurrent, in case of a short circuit in the sensor power supply circuit. The gas detector can be used in explosive zones and rooms of classes BI, B-Ia and outdoor installations of class B-Ig. It is used to equip environmental control organizations and mobile laboratories, operational groups of the Ministry of Emergency Situations, Russian Railways, employees of the oil and gas, petrochemical, energy, mining industries. It is used in sewer wells, in underground collectors, in boiler rooms, in warehouses of fuels and lubricants and in all other rooms where flammable gases and vapors can accumulate.

Dosimeter radiometer MKS-07N

Dosimeter radiometer MKS 07N (portable version) Designed to measure the ambient dose equivalent rate (hereinafter AED) and ambient dose equivalent (hereinafter AED) of photon-ionizing radiation (X-ray and y-radiation, flux density (FP) of a- and b-particles The operating principle of the dosimeter is based on converting the energy of ionizing radiation into electrical impulses using gas-discharge Geiger-Muller counters. It is designed as a base unit in a metal case with built-in detectors and a set of remote detection units. The dosimeter is equipped with an extension bar, an additional external battery compartment and two adapters for power supply from external DC and AC sources. Research and Production Company "POLYTECHFORM-M" has developed a sound adapter for MKS-07N, which is intended for direct transmission of audio-visual information about the count rate on the detectors of the BDKS-07 remote detection unit to the operator. help headphones and a bright LED. This allows you to efficiently, conveniently and quickly search for radioactive anomalies and monitor small changes in the gamma radiation (background) power by ear. The adapter can be used both in the normal and in the search mode of measurement (see item *** of the RE MKS-07N), which allows measuring the dose rate of gamma radiation or the flux density of beta particles at the points of anomalies without switching modes. adapter sold separately. It is used primarily as a portable device for operational dosimetric monitoring of the radiation situation, when compiling radiation maps of the area and studying radiation anomalies, for detecting contamination of clothing, equipment, buildings, structures, etc. north, is widely used during work at the Chernobyl nuclear power plant, as part of mobile teams and as part of vehicles of the Ministry of Emergency Situations, as well as machines for radiation and chemical analysis.

Gas analyzer - multichannel signaling device Signal-03

concentration measurement: oxygen with the Signal-03.DK sensor; toxic gases: carbon monoxide with sensor Signal-03.DOU; ammonia vapors with sensors Signal-03.DA, Signal-03.DA1, Signal-03.DA2; pre-explosive concentrations of multicomponent air mixtures of combustible gases and vapors: methane, propane, butane, heptane, hexane vapors, gasoline, diesel fuel, etc. with sensors Signal-03.DM, Signal-03.DP, Signal-03.DB. issuing an alarm when the specified level of the controlled component is exceeded in the atmosphere of working areas of industrial premises of classes B-I, B-Ia and outdoor installations of class B-Ig .Each channel of the gas analyzer-signaling device allows switching on external devices (for example, sirens, fans), which will be switched on when the preset thresholds are exceeded. At the request of the customer, it is possible to separately set one to three alarm thresholds. At the request of the customer, it is possible to manufacture the device with any combination of four sensors … For example, two channels for methane and two channels for carbon monoxide or one channel for methane, carbon monoxide, ammonia vapors and oxygen. It is possible to transfer data to a computer using the RS-485 interface. ; for industrial enterprises; premises of pumping stations; oil depots; Gas stations; facilities of oil, gas and processing enterprises; gas facilities; all other facilities where constant monitoring of the concentration of accumulating toxic, as well as explosive and flammable gases and vapors is required.

Translation of product cards in the online store

Written translation of cards for an online store within a few hours. Translation with API integration.

Selection of a translator for the staff of your company

Recruitment services. We will test, prepare and hire a translator of any language for the staff of your company in any city of the Russian Federation.

Interpreter in any city of the PRC

Interpreter for negotiations, exhibitions, visits to production, meeting at the airport in any city in the PRC.

Translation into Chinese by a native speaker

Large team of native Chinese speakers. Translation into Chinese by a native speaker – any subject, legal, technical, medical translation into native Chinese, 24 hours a day, 7 days a week.

Simultaneous translation

Simultaneous translation in pairs Russian-Chinese, Chinese-English, Russian-English, Russian – German, Russian – French and others on a turnkey basis. Any subject, urgent selection of translators.

Translation by phone, skype, conference calls

The translator connects by phone and translates from anywhere in the world. Ordering from 30 minutes – saves time and money! Translation into any languages. Available 7 days a week, 24 hours a day.

Interpretation for negotiations and meetings

Interpretation into any languages of Asia and Europe, translation of IT, advertising, political, economic, technical, financial topics. Russian and foreign native speakers with experience in your industry.

Written translation from into all languages of the world

Written translation of any kind of documentation into all languages of Asia and Europe, around the clock and seven days a week.

Assistance in organizing trips to exhibitions / conferences / business trips

Accompanying a qualified translator, guide, shopping assistant and stand assistant; selection of promo-personnel.

Preparation and translation of documentation required for foreign economic activity

Translation of certificates and licenses, patents, technical documentation, draft agreements and minutes of meetings, translation of financial and customs documents.

Translation of a website / landing page / online store into a foreign language

Translation of a website, business card website, landing page into any foreign language.

Creation of a set of advertising and souvenir products of the company in the required foreign language

Preparation and translation of advertising and souvenir products required for entering foreign markets.

Translation of the name, brand and logo of the company

Translation of the company name, logo and brand for entering foreign markets.

Natural pomegranate juice. 1 l.

Our company is the official trade representative of OJSC "Sabirabad-Canned", the Republic of Azerbaijan. High quality products, have all the necessary certificates. The party is negotiated individually.

Natural pomegranate juice. 0.75 l.

Our company is the official trade representative of OJSC "Sabirabad-Canned", the Republic of Azerbaijan. High quality products, have all the necessary certificates. The party is negotiated individually.

Pomegranate sauce - "Narsharab" seasoning

Our company is the official trade representative of OJSC "Sabirabad-Canned", the Republic of Azerbaijan. High quality products, have all the necessary certificates. The party is negotiated individually.

Natural pomegranate juice. 0.310 l.

Our company is the official trade representative of OJSC "Sabirabad-Canned", the Republic of Azerbaijan. High quality products, have all the necessary certificates. The party is negotiated individually.

Concentrated pomegranate juice.

Our company is the official trade representative of OJSC "Sabirabad-Canned", the Republic of Azerbaijan. High quality products, have all the necessary certificates. The party is negotiated individually.

Pomegranate sauce - "Narsharab" seasoning

Our company is the official trade representative of OJSC "Sabirabad-Canned", the Republic of Azerbaijan. High quality products, have all the necessary certificates. The party is negotiated individually.

Fire-fighting tank truck AC

A fire-fighting tanker is designed to carry out actions to extinguish fires and perform rescue operations at enterprises for the extraction, preparation and transport of natural gas, as well as oil and oil products. Those. specifications Base chassis -43118 Wheel arrangement 6×6 Engine power kW (hp) 221 (300) Engine type diesel Combat crew 7. (6 + 1) Water tank capacity 5000-8000 liters Foam tank capacity 360-600 liters Type of fire pump NCPN 40 , 70, 100, Nominal head of normal pressure m. Water. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

Foam extinguishing vehicle APT

Carrying out actions to extinguish and perform emergency rescue operations at the enterprises of production, processing, storage and shipment of oil and oil products. Those. specifications Base chassis -43118 Wheel arrangement 6×6 Engine power kW (hp) 221 (300) Diesel engine type Combat crew 7. (6 + 1), 3. (2 + 1) Water tank capacity 4000-8000 l. Foam tank capacity 360- 600 l Type of fire pump NTsPN 40, 70, Nominal normal pressure head of water. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

Fire foam lifter PPP 38 - (65222)

Attachments imported by Liebherr, Germany. Roll boom 4-section folding 38 m long. The use of such an arrow can significantly reduce the overall dimensions. Provides a wide range of maneuvering (up to 12 degrees of freedom) of movement of the end section of the boom, which allows the boom to work in confined conditions, through technological ramps, under technological ramps, as well as in other hard-to-reach places. The location of the slewing ring directly behind the cab of the vehicle chassis. The slewing support design should be capable of horizontal unfolding of the boom parallel to the ground over its entire length above the chassis cab. Due to this, to provide an outreach of the boom in the horizontal plane within 35 m, which will make it possible to guarantee the supply of fire extinguishing substances to the "mirror" of the VST with a volume of 20,000-50,000 m3. with an inner diameter of 150 mm of constant cross-section. The joints of the water pipelines are of the articulated type. Main – The foam concentrate is supplied by a pressure pump. The system performance corresponds to the performance of the fire pump 70-150 l / sec when receiving the foaming agent solution – 1-6%. – Duplicating – Through the foam mixer KSHIN-PS-16. The system performance corresponds to the performance of a fire pump 70-150 l / s when receiving a foaming agent solution – 1-6%. – Reserve – Through a built-in adjustable Foam concentrate dispenser with a d-77 mm connecting head. 6. The capacity of the chassis fuel tank is 350 liters. (a power reserve of more than 400 km is provided). The capacity of the additional fuel tank is 450 liters. 7. At the end section of the boom, a special rotary device (SPU) with a KOMLOK quick-release fastener is mounted, which allows you to quickly attach and remove the exported standard fire equipment. Removal and installation of fire fighting equipment is carried out from the ground when lowering the end section of the boom. If necessary, to change P.O. it is possible to rest the last boom section on the ground. During the supply of the extinguishing agent, the maneuvering of the rotary platform (SPU) is additionally provided, by the angle of rotation (not taking into account the angle of rotation of the boom), in degrees: – In the horizontal plane – 120 (± 5) – In the vertical plane – 90 (± 5).

Fire pump station PNS

The PNS fire pumping station is designed to supply water, a foam solution over long distances along main lines, to power fire tankers, fire foam lifters, at enterprises for the extraction, processing, storage and shipment of oil and oil products. Those. specifications Base chassis -43118 Wheel arrangement 6×6 Engine power kW (hp) 221 (300) Diesel engine type Combat crew 3. (2 + 1) Fire pump type NCPN 100, Nominal normal pressure head m. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

The car pump and hose ANR

Base chassis -65111 Wheel arrangement 6×6 Engine power kW (h.p.) 221 (300) Diesel engine type Combat crew 3. (2 + 1) Foam tank capacity 0-3000 l Type of fire pump NCPN 100, Nominal normal pressure head of water m. Art. 100 Location of the fire pump Rear. Vacuum system AVS-01EN Maximum suction height, 7.5 m.

Full polypropylene mold filters

Our company produces Nutsche filters from polypropylene. Also we can offer other thermoplastic materials (PVC, PEHD, PVDF) for specific solutions. Nutsche filters are used for filtration and thickening of solutions. Nutsche is the simplest batch-type filter working under vacuum or overpressure. Direction of gravity and movements of filtrate are the same in it. Nutsche filters can be of 2 types: open and closed filters. Nutsche filter of open type works under discharging. Such kind of filter is a device of rectangular or round shape equipped with the filter baffle plate above the bottom. Filter can be made from cloth, thermoplastic perforated sheets or other materials which is laid on grid. After the filter is filled with suspension and vacuum is blowing the filterable substance goes through the baffle plate. Sediments remain on the baffle plate. After the process is completed the sediments are removed manually. The device can be equipped with a mobile bottom to simplify the processes of unloading. Advantage of open Nutsche filters from PP is its simple and safe design which enables to wash sediments carefully. Nutsche filters are made from polypropylene. Therefore they are resistant to aggressive mediums and operate by the temperature from -5 till + 95 С°. Nutsche filter of closed type works under overpressure. It consists from the case with a jacket, removable cover and mobile bottom. The filter baffle plate is placed on support grid. This plate can be made from guard mesh, layers of fibers or perforated sheets. Ring plate is placed above the filter baffle plate. It holds the sediments by uploading. The bottom is movable: it can turn and descend at an angle suitable for manual removing of sediments from the filter plate. Nutsche filter is provided with nozzles to supply suspension, compressed air or to remove filtrate. The filter is equipped with safety valve to prevent the pressure rise above the limit. By the filtration under overpressure the saturated steam is supplied into the jacket. It ensures the viscosity reduction of filtrate and increases the efficiency.

Horizontal scrubber

Gas cleaning is inevitable in some industries, it requires safe workplaces and regulations for the cleanliness of the environment. For chemically aggressive media containing acids and alkalis, we can select scrubbers and scrubbers made of corrosion-resistant plastics (polypropylene PP, polyphenyl sulfide PPS, polyvinyl chloride PVC, polyethylene PE, polyvinylidene fluoride PVDF), our own and imported. The simplest model of a horizontal wet scrubber type GM-2 with an irrigation chamber and a multistage polymer droplet collection system refers to hollow scrubbers. Designed for low concentrations, at a gas temperature of no more than 40 degrees. Not suitable for mixed acids. Principle of operation: Horizontal gas scrubber type GM-2 works on the principle of "binding" aerosol and dust particles with the irrigation liquid. The air stream is continuously sprayed with water (solution) using double nozzles that spray the liquid in two directions, against the air flow and in the same direction. Gas scrubber Maksimova type GM-2 The simplest model of horizontal wet scrubber type GM-2 with an irrigation chamber and a multistage polymer droplet collection system refers to hollow scrubbers. Designed for low concentrations, at a gas temperature of no more than 40 degrees. Not designed for a mixture of acids. Principle of operation: Horizontal scrubber type GM-2 works on the principle of "binding" of aerosol and dust particles with the scrubbing liquid. The air flow is continuously irrigated with water (solution) by means of double nozzles that spray liquid in two directions, counter-flow of air and in a concurrent direction. Gas scrubber Maksimova type GM-4 Two-stage model of horizontal wet scrubber type GM-4 with a nozzle chamber and a multistage polymer system for dropping. It is used for most acids, alkalis and their mixtures. Principle of operation: The GM-4 scrubber works on the principle of "binding" aerosols, vapors and dust particles with an irrigating liquid. The air flow passes through the nozzle chamber, which is continuously sprayed with water (solution) by means of nozzles that spray the liquid in two directions, against the air flow and in a concurrent direction.

Polypropylene chemical reactor

A chemical reactor is a unit for carrying out stable and stable chemical processes with strict adherence to the necessary parameters of the process (temperature, mixing speed and dosing of components). The main purpose of chemical reactors is to produce the final product from the initial components. The main material for manufacturing the reactor is polypropylene, since the medium is usually very aggressive, it is also possible to manufacture it from other polymers (polyethylene, PVC, PVDF).

Polypropylene fans

The main specialization of the company "UralAktiv", Yekaterinburg is the production and supply of industrial polymer radial fans in acid-proof design, all standard sizes of low pressure hoses, medium high pressure hoses and high high pressure hoses, with a capacity from 500 m3 / h to 150 000 m3 / h and pressure up to 8 000 Pa for various chemical environments containing acids and alkalis and with a service life of up to 50 years in corrosive gases.

Nutsch filter

Our company produces Nutsch filters from polypropylene, but for specific solutions we can offer other thermoplastics (PVC, HDPE, PVDF). Nutsch filters are used to filter or thicken a solution. Nutsch is the simplest batch filter operating under vacuum or overpressure … The directions of gravity and the movement of the filtrate in it coincide. There are two types of suction filters: open and closed.

Galvanic polypropylene baths

The main specialization of UralAktiv LLC is the production of polypropylene ventilation for electroplating industries. On the basis of our company, we have the ability to develop and manufacture any type of electroplating baths made of polypropylene. The material for making electroplating baths depends on the set, concentration and temperature of the acids used in the process. The most versatile are polypropylene baths due to their availability and good chemical resistance. Available materials for plastic electroplating baths: PP, Polypropylene (made in Russia); PP, Polyproipilene (imported); PVC, polyvinyl chloride; PVDF, polyvinyldene fluoride. Polypropylene electroplating baths already contain stiffeners, and for large galvanic baths, steel is used outer frame. The size of the electroplating baths directly depends on the size of the workpiece in this process, which is why most often the electroplating baths are designed and manufactured according to the specific requirements of the client. Polypropylene electroplating baths are suitable for most electroplating processes: polishing, chromating, zinc plating, nickel plating, cadmium plating, copper plating, varnishing, brass plating, parts washing and drying. In addition to baths, our company can manufacture electroplating tables and drums. Drums allow galvanic processing of small metal products and all hardware products. For example: studs, bolts, nails, metal fittings, etc. A galvanic drum, as a component unit, can be included in drum suspensions (carriages) and drum baths. Reels of all types and sizes are produced, depending on the dimensions of the baths and transport equipment of the customer's galvanic lines. Plating baths made of plastic are much more reliable than metal or stainless steel baths and much cheaper than electroplating baths made of special steels. At the same time, they are lighter and have a better appearance. The service life of such galvanic baths is from 10 to 50 years.

Containers made of polyethylene and polypropylene

On the basis of our company, we design and manufacture containers from polypropylene and polyethylene based on sheet materials. The most optimal and economically feasible design of a polypropylene container is a vertical cylindrical shape. Horizontal containers made of polypropylene, as a rule, are made by our company of rectangular shape with additional stiffening ribs. It is better to make horizontal polyethylene tanks (polyethylene tanks) from finished pipes of the required diameter, since they have the maximum ring stiffness. Polyethylene (polypropylene) containers can be used for storing drinking water or storing aggressive liquids (solutions of acids and alkalis). The material of the acid container is selected individually, depending on the temperature, composition and concentration of acids. So, for example, polyethylene is the best material for a sulfuric acid container. It should be noted that the service life of a polypropylene container is maximum if it is located inside a heated room. For outdoor use, polyethylene is more suitable. There are the following types of plastic containers: Vertical cylindrical containers: containers with a flat bottom containers with a conical bottom containers with a conical lid containers with a conical bottom and a conical lid Horizontal conical containers Rectangular containers Containers for transporting corrosive liquids from thermoplastics Tech. specifications Vertical cylindrical tanks Flat-bottomed tanks Vertical-type plastic cylindrical tanks with a flat bottom are intended for stationary storage of both drinking water and aggressive chemicals. The material from which the containers are made is suitable for contact with food and chemical media. The main material for containers, tanks, reservoirs is polypropylene in gray RAL7032 and black polyethylene. Other types of materials and colors are available on special order. Available types of plastics: PP / PP – polypropylene; PPs – Flame Retardant Polypropylene; PP-EL-s – electrically conductive, flame retardant polypropylene; PE / PE – polyethylene; PVC – polyvinyl chloride; PVDF stands for polyvinylidene fluoride. At the request of the customer, we manufacture in other sizes, and, if necessary, we will help to complete additionally: level sensors, a pump, a stirrer, heaters, etc. Containers with a conical bottom The company UralAktiv LLC manufactures polymer containers with a conical bottom. All of them can be made of durable chemically resistant plastic, for example, polypropylene sheet, polyethylene sheet. Their bottoms are tapered and the drain hole is located at the bottom of the tank. Thanks to this design, you can use absolutely all the contents of the container, and the sediment does not accumulate on the bottom. Containers with a conical lid We make cylindrical plastic containers with a flat bottom and a conical lid from polypropylene, from polyethylene. This version of the lid makes it possible to manufacture containers with a large volume. Polymer containers with a conical lid are conveniently used in various technological processes, for example, in the metallurgical, chemical or food industries and not only: it can be energy, mechanical engineering and household use, for example, for storing water. Tanks to order can be completed with additional equipment, such as: level gauges, taps, nozzles, etc. Tanks with a conical bottom and a conical lid Our company also calculates, designs and manufactures more complex containers, for example, with a conical bottom, conical lid, supports. For additional strength, stiffening belts are provided. Equipment can be installed on all containers, tanks, reservoirs made of polypropylene, polyethylene: agitators, pumps, level sensors, shut-off valves, electric heaters, instrumentation and much more. for a more convenient location. Horizontal tanks made of chemically resistant plastic (PP, PE) are designed for storing drinking water, food, as well as aggressive acids and alkalis. Temperature range of storage of liquids in plastic containers from -40 to + 90 degrees Celsius. At the request of the customer, the complete set can be different: fittings, bends, level gauges and other equipment.

Vertical scrubbers

An absorber (absorption column) is a mass transfer apparatus used to separate gas mixtures by selective absorption of individual components by an absorbent. Typically, absorption columns are used for the production of ammonia, chlorine and sulfuric acid. Absorption columns are: – Packed absorbers. – Disc (bubble) absorbers. – Tubular absorbers. Absorption plants manufactured by us are made of polymeric materials (polypropylene, polyethylene, PVC, PVDF), as well as all fittings, an irrigation system from a pump to nozzles and instrumentation. Maksimova vertical gas scrubbers The model of a vertical wet scrubber type VM is designed to remove most acids, alkalis and their mixtures, including impurity gases. Principle of operation: Gas scrubber VM has a sufficiently large packed bed, which makes it possible to use this scrubber as an absorber. The air flow passes through the bed of the packing from the bottom to the top, which is continuously sprayed with water (solution) using nozzles. Due to the large volume of the nozzle, the contact area of the liquid contact with the gas-air mixture increases, thereby increasing the cleaning efficiency. Further, the air flow enters the droplet separators, where the scrubbing liquid is separated from the gas-air mixture. Due to the bends of the droplet separator profile, moisture droplets settle on the surface and roll down, falling into the packed bed. The sprinkling liquid, passing through the nozzle layer through the water seal, enters the buffer tank. The water seal makes it possible for the scrubber to operate under vacuum. Further, the liquid is fed back to the flushing by means of the pump. In addition, the scrubber can be equipped with a coalescer. The coalescer is positioned between the elements of the droplet separator in such a way that even the smallest droplets are enlarged and then separated on the droplet separators. Those. specifications Vertical scrubbers are divided into three types by flow velocity: VM-05 – scrubber with a flow velocity of 0.5 m / s, resistance up to 550 Pa; VM-1 – scrubber with a flow velocity of 1.0 m / s, resistance up to 600 Pa ; VM-2 – scrubber with a flow rate of 2.0 m / s, resistance up to 650 Pa.

Industrial laboratory furniture

Our company is engaged in the production of laboratory furniture for research facilities and industrial enterprises: tables; countertops; sinks; fume hoods; cabinets for storage and overflow of aggressive media. All products are certified by ROSTEST. Order furniture of all sizes and configurations. Polypropylene furniture can withstand heavy loads and is equipped with equipment for connecting to a water supply system, sockets, wheels, and other devices.

Caustic soda (caustic soda)
Flaked caustic soda (caustic soda)

Technical caustic soda, caustic soda flaked, caustic soda, caustic soda, caustic alkali STO 00203312-017-2011 Those. specifications STO 00203312-017-2011

Flaked caustic soda (caustic soda)

Technical caustic soda, caustic soda flaked, caustic soda, caustic soda, caustic alkali STO 00203312-017-2011 Those. specifications STO 00203312-017-2011

Flaked caustic soda (caustic soda)

Technical caustic soda, caustic soda flaked, caustic soda, caustic soda, caustic alkali STO 00203312-017-2011 Those. specifications STO 00203312-017-2011

Flaked caustic soda (caustic soda)

Technical caustic soda, caustic soda flaked, caustic soda, caustic soda, caustic alkali STO 00203312-017-2011 Those. specifications STO 00203312-017-2011

Flaked caustic soda (caustic soda)

Technical caustic soda, caustic soda flaked, caustic soda, caustic soda, caustic alkali STO 00203312-017-2011 Those. specifications STO 00203312-017-2011

Flaked caustic soda (caustic soda)

Technical caustic soda, caustic soda flaked, caustic soda, caustic soda, caustic alkali STO 00203312-017-2011 Those. specifications STO 00203312-017-2011

LookOut Pro

allows not only to track the cargo, but also to control the conditions of its transportation. Not only keep track of transport and equipment, but also control the technical parameters of their use. Possibility of connecting wireless sensors for temperature and humidity, autopsy, fuel level, video camera and SOS alarm button. refrigerated transport, rail transport, road transport, construction / road machinery

LookOut Marine

System for tracking and controlling sea transport anywhere in the world Professional solution for shipowners 100% coverage of the Earth Availability of universal special fastening in horizontal or vertical position Possibility of sealing the lighthouse, which excludes unauthorized dismantling of sea, river vessels

LookOut Standard

Monitoring the movement and condition of moving objects. You will always know where your cargo, equipment or transport is. Autonomous work up to 3 years without external power sources. Convenient web service for tracking. Features – binding the device to the web service http://lookout.ss24h.com (information on how to work is available in the "Help" service section); – complete autonomy (no external power supplies are required); – provision of autonomous operation from an internal power source up to 3 years (with default communication settings and using recommended batteries); – determining the current position in the GPS / Glonass positioning system with an accuracy of ± 3 m; – maintaining an archive of technological parameters; – built-in temperature sensor; – transmission data via Iridium (SBD) / GSM channel; – small dimensions. sea / river transport, transport / equipment on lease, cargo / container control

LookOut Compact

Satellite beacon LookOut Compact is designed to determine the coordinates of the location of a moving object anywhere in the world. In order to save energy, the product is capable of keeping an archive and communicating at the appointed time for data transmission. Included with the Lookout product, the user gets access to a Web service, with which he can track his current location, as well as see the route to follow for the selected time intervals and technological parameters. Features: – binding the device to the Web service http://lookout.ss24h.com (information on operation is available in the "Help" service section); – complete autonomy (no external power supplies are required); – provision of autonomous operation from an internal power source at least a year (with the default communication settings and using the recommended batteries); – determining the current position in the GPS / Glonass positioning system with an accuracy of ± 3 m; – maintaining an archive of technological parameters; – built-in temperature sensor; – data transmission via a satellite communication channel Iridium (SBD protocol) or GSM channel; – small dimensions. Those. specifications Input voltage: 7..24 V Batteries used: Type AAA 5 pcs Consumption Receiving coordinates: 9mA, Receiving: 40mA, Transmitting: 0.75A, "Sleep" mode: 20μA External memory size: 16 Mb, 5000 points Satellite communication characteristics Communication channel: Iridium (SBD) Frequency range: 1621 MHz Coverage: Global, 100% coverage of the Earth Communication session duration: Not more than 2 minutes The volume of transmitted data per day (at a frequency of obtaining coordinates 1 time in 10 minutes): 750 bytes GPS / GLONASS module characteristicsPosition determination time: From 4- x seconds Positioning accuracy: Not more than 10 meters GSM communication characteristics GPRS communication channel: 10 class Communication standard: GSM 900/1800 Number of SIM chips: 2 General characteristics Sheath protection degree: IP40 Operating temperature: -40 ° C .. + 60 ° C Weight: 0.4 kg (without batteries) Dimensions: 160х110х37 mm

SeaDrone

Small unmanned vessel Fishing Coast guard Rescue services Transport shipping

Irradiator germicidal ultraviolet UV-REX 1

The illuminator is equipped with the following options: 1. Motion sensor to prevent unplanned entry of personnel into the irradiated area 2. Remote control for turning the illuminator on, off and setting the timer 3. Timer for setting the time to turn the illuminator on and off 4. A system for automatically maintaining the optimum temperature of the lamps 5. Height adjustable 6. Movement and carrying handles 7. Wall Mount Brackets Tech. specifications Type of placement – mobile / portable / suspended Output power for bactericidal ultraviolet, W – 130 Power frequency, Hz – 50 Degree of protection, not less than – IP21 Level of bactericidal efficiency,% 90 – 99.9

2021 new crop Walnuts kernels

2021 New crop.

ELH, LH, LQ, LAH, LAQ

Earliest shipment in October

2021 new crop Walnuts inshell

2021 New crop.

Wash or unwashed for customer’s option.

Earliest shipment: September

Biomate Products

Check our website and contact to us for more information

3A molecular sieve 3.0-5.0mm in LNG

3A Molecular Sieve is the potassium form of the type A crystal structure. It has an effective pore opening of about 3 angstroms(0.3nm)This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers.

99.99% Carbon molecular sieve CMS260 in PSA nitrogen generator

Also called Carbon Molecular Sieve, which is the appearance of cylindrical black solid, contains countless 4 angstrom fine pores. It is separated air into nitrogen and oxygen. And concentrate nitrogen and high purity nitrogen recovery on every kind of nitrogen generator.

Activated alumina oxide ball 3.0-5.0mm in air dryer

Activated Alumina is white spherical porous particles with uniform particle size. Smooth surface, high mechanical strength, strong hygroscopicity, does not swell or crack after absorbing water, and remain intact, non-toxic, odorless, insoluble in water and ethanol. Fluorine removal agent (large capacity for fluorine removal), defluorination agent for circulating alkanes in the production of alkylbenzene, deacidification regenerator for transformer oil, used for gas drying in the oxygen industry, textile industry, and electronics industry, drying of automatic instrument wind, and It is used as desiccant and purifying agent in chemical fertilizer, petrochemical drying and other industries (the dew point can reach -40 degrees). In the air separation industry, the pressure swing adsorption dew point can reach -55 degrees. It is an efficient desiccant for deep drying.

17-19% inert ceramic balls 3-50mm as support media

Inert alumina ball-17 is called ceramic ball 17%~19% Al2O3. It is equal to Denstone® 57 Support Media.They are the most widely used support media in the world. It is made of high quality chemical-porcelain clay materials, which has quite excellent stability, high mechanical strength and resistance to thermal shock, This makes them all ideal choice for support of all types of catalyst.

Na type oxygen molecular sieve in PSA generator

Portable Medical Oxygen Molecular Sieve is high-efficiency oxygen molecular sieve of X-type molecular sieve(pore diameter:10 angstroms). It is suitable for household and medical oxygen generator with PSA. It has good selectivity of N2/O2. Easily desorption.

13x molecular sieve 1.7-2.5mm in LPG gas

13X type molecular sieve, also called NaX or NaA type molecular sieve,is one type of alumino silicate crystal with average pores measuring of 9angstrom(0.9nm).It has good mass transfer rates. And is commonly used to separate nitrogen from oxygen.

Bakery wheat flour "zolotaya zhitnitsa", 2 kg

Хлебопекарная мука высшего сорта «Золотая Житница» по ГОСТ 26574 –2017. Изготавливается из экологически чистого сырья, не содержит ГМО, белизна 58-59 единиц; глютен 28%; ИДК 70-75; ПЭ 350,

Bakery wheat flour, premium grade "Novomoskovskaya", 2 kg

Мука пшеничная высшего сорта «Новомосковская», 2 кг по ГОСТ 26574 –2017. Изготовлен из экологически чистого сырья, не содержит ГМО, белизны 58-59 единиц; глютен 28%; ИДК 70-75; ПЭ 350,

Bakery wheat flour, 50 kg

Хлебопекарная мука высшего сорта «Новомосковская» по ГОСТ 26574 –2017. Изготавливается из экологически чистого сырья, не содержит ГМО, белизна 58-59 единиц; глютен 28%; ИДК 70-75; ПЭ 350,

Essential oil

Essential oil refers to the general name of volatile aromatic substances extracted from spice plants or fragrant secreting animals. Generally, essential oils are volatile aromatic substances extracted from flowers, leaves, roots, seeds, fruits, bark, resin, wood core and other parts of plants by steam distillation, cold pressing, fat absorption or solvent extraction. Essential oils are divided into diluted (compound essential oils) and undiluted (unilateral essential oils), such as cactus seed oil. The essential oil is highly volatile
Once exposed to air, it will volatilize quickly, so essential oils must be stored in Sealed Dark bottles

Flowmeter-counter PRAMER-525X

The flowmeters are designed for measuring the volumetric flow rate and the total volume of liquid media in one or two filled pipelines, measuring the time of uninterrupted operation, archiving data in non-volatile memory, displaying results and transmitting information to external devices. also control systems for other liquid media in various industries and housing and communal services.Flow meters PRAMER-525X-D and PRAMER-525X-DD consist of a computing device (UV) with a liquid crystal display (LCD), non-volatile memory for data archiving, digital interface communication and one or two flow transducers (PR) connected to the first or second measuring channel (MC) of the HC. They include one or two pressure transducers (PD). Additionally, they provide indication and archiving of readings of pressure sensors in pipelines for technological purposes.

electromagnetic water flow sensor Emir-Pramer-550

Application: water flow measurement (reverse flow measurement also), operation time; data transmission via Modbus RTU, for transportation of equipment upon request. Advantages: – Wide dynamic range (1/1000), – Accuracy (± 1% in the full flow range), – Self-diagnosis of the flow meter. Nominal diameter (DN): 15 mm to 150 mm. Features: hardware components, high precision, unique digital signal processing techniques, calibration systems that provide the metrológicas characteristics required, durable fluorinated coating design. Front-end digital RS-485 output simplifies the calibration process and enables measurement data networks. Warranty period – 8 years

Electronic temperature controllers PRAMER-710

App Pramer-710 allows you to keep the temperature pleasant automatically and, as a result, it is enough to reduce heating costs. Drivers allow heating to be adjusted according to the work schedule: when applied as part of the heating system for offices and industrial facilities, heating rates and room temperatures can be reduced on weekends and holidays. Drivers provide: – automatic maintenance of the comfort temperature in the room; – automatic maintenance of the set temperature of hot water; – protection against hardware and software failures; – automated diagnostics of malfunctions and emergencies; – alarm management. Please see attachments for details on this product. Those. specifications Working conditions Ambient temperature: -5 to +50 ° C; Relative humidity: up to 80% at + 35 ° C and below, no condensation; Atmospheric pressure: 84 … 106.7 kPa.

Electromagnetic water flow meters Pramer-525X
Ultrasonic Water Flow Meter PRAMER-510

Ultrasonic water flow meter PRAMER-510 is a device with noise, high stability, reliability characteristics of metrológicas and the ability to measure the flow of liquid, non-conductive. Advantages: – no construction elements in the pipeline flow step; – high stability of measurements; – noise immunity; – the possibility of using liquids with low conductivity; – the ability to measure the flow rate in both directions of flow; – DN up to 2000 mm. Data management Digital flow meters for measurement display indicators on the LCD and save them to a database file the following information: • The total volume of liquid is transferred in m3; • Implementation of the value of the coefficient of volumetric flow rate in m3 / h; • General continuity of service in hours and minutes; • Signs of emergencies; • Signal that the performance of the device. Those. Specifications Water temperature range: -20 (no freezing) to +150 ° C; Protection degree: IP67. Time, average service life: not less than 12 years. Calibration range 4 years. Warranty period: 4 years.

Heat meter Pramer-TS-100

Scope – heat points, heat consumption objects (buildings) for industrial, municipal and domestic purposes. The heat meter provides: – measurement of up to four current flow values, up to four current temperature values, up to four current pressure values; – distribution when setting up the connected primary converters, over two independent measuring systems; – determination of current and weighted average values of heat carrier parameters in pipelines; – calculation values of consumed thermal energy in the heating system; – archiving in the non-volatile memory of measurement and calculation results; – maintaining archives of administrative events and emergency situations; – indication of measured, calculated, tuning and archived parameters; – output of measuring, diagnostic, tuning and archive information via interfaces RS-485 or USB; – recording of generated reports, archived and configuration information on the SD-memory card; – automatic control of faults and emergency situations; – protection of archived data and configuration parameters from unauthorized access and changes eny. Those. specifications Degree of protection of the calculator from dust and water – IP54. Average service life, years – 12. Warranty period – 4 years Average MTBF, h, not less – 75000. Calibration interval – 4 years.

Ultrasonic liquid meter Pramer-510

The device allows you to measure the flow, both in the forward and in the reverse direction of flow in pipelines with a diameter of up to 2000mm. The Pramer-510 includes up to two measuring sections (IU), an electronic conversion unit (BEP) and communication lines up to 150 m long. They are used to measure the volume of liquids flow in pressure pipelines (water, industrial oil, sewage, formation water, etc.). Du IU counters: 40; fifty; 65; 80; 100; 125; 150; 200; 250; 300; 300 ÷ 2000 mm. Warranty – 4 years.

Ultrasonic liquid meter Pramer-510

The device allows you to measure the flow, both in the forward and in the reverse direction of flow in pipelines with a diameter of up to 2000mm. The Pramer-510 includes up to two measuring sections (IU), an electronic conversion unit (BEP) and communication lines up to 150 m long. They are used to measure the volume of liquids flow in pressure pipelines (water, industrial oil, sewage, formation water, etc.). Du IU counters: 40; fifty; 65; 80; 100; 125; 150; 200; 250; 300; 300 ÷ 2000 mm. Warranty – 4 years.

Electromagnetic vortex water flow EPS sensor

Application: Trade measurement and process control in various industries and municipal engineering. Hot and cold water systems; supply of drinking water, systems of food processing facilities. It can be used as heat meters, flow meters and automated systems for data collection, monitoring and control of technological processes. Nominal diameter (DN): 20 to 300 mm. Main advantages of ENP: – simple design and relatively low cost; – features of metrológicas are sufficient for commercial accounting (accuracy 1-1.5%, dynamic range – 1:50); – battery modification power supply available (battery life – 4 years); – FNU does not use the amplitude of the signal parameters, and this guarantees the stability of the operation. Output signal: pulse rate, current (4-20 mA). Self-powered version: 4 years battery life. Warranty period – 8 years Calibration interval – 4 years Average life span 15 years

ANTENNA TV "SIRIUS 2.0"

Indoor antenna "Sirius 2.0" is designed to receive television programs in the range of 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels and provides a high-quality image in the area of stable television reception. The Sirius 2.0 housing is made of modern high-tech materials with high strength and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where there is no such broadcasting yet, viewers will be able to watch all analog broadcasting channels available on the air. "Sirius 2.0" is supplied in modern bright full-color packaging made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: TV antenna of UHF range Antenna placement: Indoor Gain, max., dBi, 21-69 channel: 5 Impedance: 75 Amplifier: no Power supply: no Cable length: 2 Dimensions assembled (without attachment point), mm: 270х350х120 Weight, no more: 0.39 Dimensions in packing: 250x235x80 Weight in packing, kg: 0.56

ANTENNA TV "SIRIUS 2.0"

Indoor antenna "Sirius 2.0" is designed to receive television programs in the range of 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels and provides a high-quality image in the area of stable television reception. The Sirius 2.0 housing is made of modern high-tech materials with high strength and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where there is no such broadcasting yet, viewers will be able to watch all analog broadcasting channels available on the air. "Sirius 2.0" is supplied in modern bright full-color packaging made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: TV antenna of UHF range Antenna placement: Indoor Gain, max., dBi, 21-69 channel: 5 Impedance: 75 Amplifier: no Power supply: no Cable length: 2 Dimensions assembled (without attachment point), mm: 270х350х120 Weight, no more: 0.39 Dimensions in packing: 250x235x80 Weight in packing, kg: 0.56

TV ANTENNA «REMO BAS-5304 VIVA»

The indoor window television antenna active "Viva" is designed to receive television broadcasts in the MW and UHF bands in the analog and digital broadcasting standard. Has a built-in low-noise amplifier with adjustable gain, which allows you to significantly improve reception in urban and near suburbs. Indoor antenna with outdoor capabilities! The effect is achieved by attaching to the window glass. Those. Specifications Antenna Placement: Indoor Antenna Type: All Wave TV Antenna Gain, Max, dBi, Channel 1-5: 42 Gain, Max, dBi, Channel 6-12: 42 Gain, Max, dBi, Channel 21-69: 42 Supply Voltage , V: 12 Wave impedance, Ohm: 75 Cable length, m: 1.8 Amplifier: yes Power supply unit: yes Weight, no more, kg: 0.36 Dimensions in packing, mm: 345х170х50

TV ANTENNA «REMO BAS-5302»

"REMO BAS-5302" is an active small-sized indoor antenna designed to work with television programs in the MW and UHF bands. Provides optimal reception of signals of analog MV / UHF and digital television formats DVB-T / DVB-T2. The antenna is equipped with a built-in amplifier and has the ability to adjust the gain of the TV signal. The antenna is supplied in a bright full-color box. Those. Specifications Antenna Placement: Indoor Antenna Type: All Wave TV Antenna Gain, Max, dBi, Channel 1-5: 31 Gain, Max, dBi, Channel 6-12: 31.5 Gain, Max, dBi, Channel 21-69: 33.5 Amplifier type: USSH-2A-DX Supply voltage, V: 12 Wave impedance, Ohm: 75 Cable length, m: 1.2 Amplifier: yes Power supply unit: yes Weight, not more, kg: 0.35 Dimensions in packing, mm: 285x250x120 Weight in packing, kg: 0.5

TV ANTENNA "REMO BAS 5301 DAWN DIGITAL"

The active television small-sized indoor antenna "Zarya Digital" is designed to receive television programs in the MW and UHF bands. The antenna receives signals of analogue television and digital television of the DVB-T / DVB-T2 formats. The Zarya Digital antenna works in the zone of reliable reception. The range and quality of reception depends on the location of the antenna, the power of the transmitter, the distance to it, the terrain and a number of other factors. The antenna has the ability to adjust the gain of the TV signal. The antenna is supplied in a full color box. Those. Specifications Antenna Placement: Indoor Antenna Type: All Wave TV Antenna Gain, Max, dBi, Channel 1-5: 31 Gain, Max, dBi, Channel 6-12: 31.5 Gain, Max, dBi, Channel 21-69: 33.5 Amplifier type: USSH-2A-DX Supply voltage, V: 12 Wave impedance, Ohm: 75 Cable length, m: 1.8 Amplifier: yes Power supply unit: yes Weight, no more than, kg: 0.55 Dimensions in packing, mm: 280x150x120

TV ANTENNA REMO «BAS-5106 RADAR»

Antenna "REMO BAS-5106 RADAR" is designed to receive television programs in the frequency band 174 … 862 MHz (channels from 6 to 69 MV and UHF). The antenna receives signals of analog and digital television in the DVB-T / DVB-T2 format. The antenna has a built-in amplifier, which can be powered either through a coaxial cable directly from a DVB-T2 digital receiver (receiver) or a TV with a DVB-T2 tuner (if such The antenna is supplied in a full color micro corrugated box. The antennas can be produced in blister packs. Those. specifications Antenna placement: Indoor Antenna type: Broadband TV antenna Gain, max., dBi, 6-12 channel: 15 Gain, max., dBi, 21-69 channel: 26 Supply voltage, V: 5 Impedance, Ohm: 75 Cable length, m: 1.2 Amplifier: yes Power supply unit: no Weight, no more, kg: 0.35 Dimensions in packing, mm: 265x240x35

TV ANTENNA REMO BAS-5340 «TVJET ANT»

Indoor broadband antenna REMO BAS-5340-5V "TVJET ANT" for connection to digital TV broadcasting receivers DVB-T and DVB-T2. The new integrated amplifier achieves high signal reception performance. And the classical log-periodic structure, on which this antenna is based, provides a high-quality image in the area of stable television reception. REMO BAS-5340-5V "TVJET ANT" case is made of modern high-tech materials with high strength and operational safety. The antenna has a modern appearance, while developing it, the realities of today were taken into account – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is made in a classic black color and looks great when paired with black technology. Supplied in a full color micro corrugated box. Those. specifications Antenna type: Broadband TV antenna Antenna placement: Indoor Gain, max., dBi, 6-12 channel: 23 Gain, max., dBi, 21-69 channel: 43 Impedance: 75 Amplifier: yes Power supply: no Power supply, V: 5 Cable length : 1.8 Dimensions in assembly (without attachment point), mm: 270х350х120 Weight, no more: 0.36 Dimensions in packing: 250х235х80 Weight in packing, kg: 0.55

TV ANTENNA «REMO BAS-5121 FOBOS 2.1»

Indoor antenna "Phobos 2.1" is designed to receive television programs in the range of 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels, equipped with a modern low-noise amplifier and provides high-quality images in the area of stable television reception. The Phobos 2.1 housing is made of modern high-tech materials with high durability and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where such broadcasting is not yet available, viewers will be able to watch all analog broadcasting channels available on the air. two versions: powered by a built-in amplifier from a digital receiver or thanks to a USB injector "Phobos 2.1" is supplied in a modern bright full-color package made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: TV antenna of UHF range Antenna placement: Indoor Gain, max., dBi, 21-69 channel: 42 Impedance: 75 Amplifier: Yes Power supply: Yes Supply voltage, V: 12 Cable length: 1.8 Dimensions assembled (without attachment point), mm : 270х350х120 Weight, no more: 0.67 Dimensions in packing: 250х235х80

TV ANTENNA «REMO BAS-5315»

The active indoor all-wave antenna "REMO BAS-5315" specializes in receiving analog and digital (DVB-T and DVB-T2) broadcasting format of television programs in a wide frequency range. Equipped with a built-in amplifier, thanks to which it confidently receives the signal in the room. It is powered by a complete power supply unit. White polymer plastic gives "REMO BAS-5315" a modern look. In addition, the high-tech materials of the case are highly durable and safe to use. The antenna is supplied in a micro-corrugated cardboard package. Those. specifications Antenna type: All-wave TV antenna Antenna placement: Indoor Gain, max., dBi, 6-12 channel: 25 Gain, max., dBi, 21-69 channel: 35 Impedance: 75 Amplifier: Yes Power supply: Yes Supply voltage, V: 12 Cable length : 1.8 Weight, no more: 0.9 Dimensions in packing: 285x235x235

TV ANTENNA «REMO BAS-5320 INTER 2.0»

All-wave terrestrial indoor antenna "Inter 2.0" is designed to receive television programs in the ranges of 1-12 and 21-69 channels in analog and digital (DVB-T and DVB-T2) broadcast formats. The antenna is based on the classic log-periodic structure for UHF channels and has a flexible dipole element for MV channels. The amplifier of the new design is practically not susceptible to the negative influence of interference from switching power supplies of modern household and computer equipment. The "Inter 2.0" case is made of modern high-tech materials with high durability and operational safety. The antenna has a modern, elegant look, while its development took into account the realities of today – for example, the height of the main plane was chosen so that when installed on a window sill, it would not be shielded by the metal reinforcement profile of plastic windows. The antenna is optimized for receiving digital broadcasting in DVB-T and DVB-T2 formats in the UHF range, but in regions where there is no such broadcasting yet, viewers will be able to watch all MV and UHF channels thanks to a flexible dipole element. "Inter 2.0" is delivered in a modern bright full-color packaging made of micro-corrugated cardboard. You will easily notice it in the shop window and will gladly present it to your relatives, friends and acquaintances. Those. specifications Antenna type: All-wave TV antenna Antenna placement: Indoor Gain, max., dBi, 6-12 channel: 34 Gain, max., dBi, 21-69 channel: 42 Impedance: 75 Amplifier: Yes Power supply: Yes Supply voltage, V: 12 Cable length : 1.8 Weight, no more: 0.67 Dimensions in packing: 255x235x80

A related B-90

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 10 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED Lighting # Actis # Street Lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

Actis AMJ-60-2L

Luminaires Actis AMJ on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to diffusion and a large area of the glow, they have less glare; – Suspension height from 4 to 10 meters; – Uniform diffused light.

Actis AMJ-30-1L

Luminaires Actis AMJ on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to diffusion and a large area of the glow, they have less glare; – Suspension height from 4 to 10 meters; – Uniform diffused light.

A related B-120

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 12 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 12 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED lighting # Actis # Street lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

A related B-120

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 12 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 12 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED lighting # Actis # Street lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

A related B-90

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 10 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED Lighting # Actis # Street Lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

A related B-60

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 10 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED Lighting # Actis # Street Lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

A related-100 1000

LED luminaire Actis Street M is a reliable lighting product, consisting of components from the world's leading manufacturers. – Reduced energy consumption by up to 70%; – Vandal resistance. Protective glass – unbreakable monolithic polycarbonate; – Instant on, no inrush currents; – Service life over 15 years; – Maintenance-free device; – High color rendering index (CRI more than 80); – No stroboscopic effect; – Light contrast 400 times higher compared to gas discharge lamps; – High mechanical strength and vibration resistance; – Environmental safety; – Fast payback. # ACTIS # ProEnergoSvet # LED Lighting # Actis # Street Lighting # Industrial Lighting # LED Lamp # Cantilever Lamp #Led # Lighting Production # Trunk Lighting

A 60-related

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 10 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED Lighting # Actis # Street Lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

A related 50-1000

Luminaires Actis A of the M series, on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used for ceiling heights from 4 to 12 meters. Features: uniform light, no ripple, 120 degrees sweep Features: – Diffused uniform light; – Narrow profile. # ACTIS # ProEnergoLight # LED Lighting # Actis # Street Lighting # Industrial Lighting # LED Lamp # ConsoleLight #Led # Lighting Production # Trunk Lighting

A 30-related

Luminaires Actis A on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used for ceiling heights from 4 to 10 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to diffusion and a large area of the glow, they have less glare; – Suspension height from 4 to 12 meters; – Uniform diffused light.

A related-120

Luminaires Actis A STREET on discrete diodes with a maximum efficiency of 140–160 lm / W. They are used at a suspension height of 4 to 12 meters. Uniform light, no ripple, 120 degree sweep Features: – Due to the diffusion and large area of the glow, they have less blinding effect; – Suspension height from 4 to 12 meters; – Uniform diffused light. # ACTIS # ProEnergoLight # LED lighting # Actis # Street lighting # IndustrialLighting #LEDLuminaire #ConsoleLighting #Led #Luminaire Manufacturing # TrunkLighting

A related-100

LED luminaire Actis Street is a reliable lighting product, consisting of components from the world's leading manufacturers. – Reduced energy consumption by up to 70%; – Vandal resistance. Protective glass – unbreakable monolithic polycarbonate; – Instant on, no inrush currents; – Service life over 15 years; – Maintenance-free device; – High color rendering index (CRI more than 80); – No stroboscopic effect; – Light contrast 400 times higher compared to gas discharge lamps; – High mechanical strength and vibration resistance; – Environmental safety; – Fast payback. # ACTIS # ProEnergoSvet # LED Lighting # Actis # Street Lighting # Industrial Lighting # LED Lamp # Cantilever Lamp #Led # Lighting Production # Trunk Lighting

A related-200

LED luminaire Actis Street is a reliable lighting product, consisting of components from the world's leading manufacturers. – Reduced energy consumption by up to 70%; – Vandal resistance. Protective glass – unbreakable monolithic polycarbonate; – Instant on, no inrush currents; – Service life over 15 years; – Maintenance-free device; – High color rendering index (CRI more than 80); – No stroboscopic effect; – Light contrast 400 times higher compared to gas discharge lamps; – High mechanical strength and vibration resistance; – Environmental safety; – Fast payback. # ACTIS # ProEnergoSvet # LED Lighting # Actis # Street Lighting # Industrial Lighting # LED Lamp # Cantilever Lamp #Led # Lighting Production # Trunk Lighting

Arabica Coffee Bean - Kerinci Origin, Jambi
White Pepper | Muntok White Pepper - Piper nigrum, Indonesia
Clove, Cloves | Dry Cloves - Syzygium aromaticum, Indonesia
Arabica Coffee Bean - Java Preanger Origin, West Java
Arabica Coffee Bean - Lintong Origin, North Sumatera
Arabica Coffee Bean - Sidikalang Origin, North Sumatra
Arabica Coffee Bean - Mandheling Origin, North Sumatra
Arabica Coffee Bean - GAYO Origin
Ginger | White Ginger - Zingiber officinale | Fresh and Powder Ginger
Robusta Coffee Bean - Java Preanger Origin, West Java
Robusta Coffee Bean - Lombok, West Nusa Tenggara
Robusta Coffee Bean - Muara Bungo, Jambi
Turmeric - Curcuma longa | Fresh and Powder Turmeric
Test bench for safety valves DN 10 ... 400 MM (⅜ ... 16 ")

PURPOSE: • leak test disc and seal seat; • door tightness test; • test of performance and adjustment of working pressure. OBJECTS TO BE CHECKED: • safety valves. STORAGE TEST TYPE OF CONNECTION: * • flanges; • threaded ends; ADVANTAGES: ■ Fast clamping and centering of the valve, tested by synchronous movement of two or three clamps. ■ Sealing Valve testing is done through the hydraulic cylinder. ■ Compact size fixing device integrated stainless steel water collection tray. ■ Water-contacting participants to corrosion. ■ Equipped with accessories for sealing adapters for each DN and a set of spare parts.

TEST BENCHES FOR SHUT OFF VALVES DN 10...800 MM

PURPOSE:. testing the valve's body for strength and density;. gate tightness tests;. environmental leakage tests (including gland seals);. operation test;. pressure safety valves gate tightness test;. pressure safety valves operation tests.TESTED ITEMS:. gate valves;. ball valves;. stop valves (globe valves);. check valves;. butterfly gates;. plug valves.TESTED UNIT CONNECTION TYPE:. flanged (according ASME B 16.5, GOST 12815 etc.);. welded ends (according ASME B 16.25, GOST, etc.);. threaded-end;*. true union.*ADVANTAGES:-Clamping of tested valve provided by hydraulic cylinder, optionally test bench canbe equipped with proportional clamping control system, which excluding axialcompression applied to the valve body during clamping by hydraulic cylinder,during high pressure testing.*- The two-sided gate sealing during tests do not require the tested valverearrangement, which significantly reduces the test time.- The bench is equipped with the water-collection tray with stainless steel tank.*- The test preparation time is significantly reduced by using the high-pressure fastcoupling hoses.- The bench is quickly adjusted to face-to-face dimensions of valve by using theelectrically driven cross-head.-The patented design of the self-sealing adapters exclude axial compressionduring the tests, which ensures the test reliability, protects the valves againstdeformation, and extends the valve life.*- All water-wetted parts are corrosion-proof.- The bench can be equipped with replaceable sealing adapters.*- Increased-diameter hoses reduce the time of the valve filling with the test medium.-Turning upper cross-head is used to simplify the valve installation procedurebefore testing.- The test preparation time is significantly reduced by using the high-pressurequick-connect hoses.- Fast clamping and centering of the tested valve is ensured due to synchronizedtravel of the straps.- Test bench allows visual detection of seat leakage point.

TEST BENCHES FOR SHUT OFF VALVES DN 400...1400 MM

PURPOSE:• testing of the body part materials for strength and density (shell test);• gate tightness tests (leakage test);• environmental leakage tests (including gland seals), backseat test;• operation test (functional test).TESTED ITEMS:• gate valves;• ball valves;• butterfly valves;• check valves;• plug valves.TESTED UNIT CONNECTION TYPE:• flanged (according ASME B 16.5, ASME B 16.47,GOST 12815 etc.);• welded ends (according ASME B 16.25, GOST, etc.);*• set of sealing adapters available.*ADVANTAGES:- Clamping of tested valve provided by hydraulic cylinder,optionally test bench can be equipped with proportionalclamping control system, which excluding axialcompression applied to the valve body during clampingby hydraulic cylinder, during high pressure testing.*- Clamping unit can be provided with radial sealing type orself-sealing adapters.*- The two-sided gate sealing during tests do not require thetested valve rearrangement, which significantly reducesthe test time.- The bench is equipped with a special system for airremoval from the tested valve, which improves safety,productivity, reliability of the obtained data, and obviatesthe need for additional air drain.*-The bench is equipped with the water-collection tray withstainless steel tank.*– The test preparation time is significantly reduced by usingthe high-pressure quick-connect hoses.-The bench is quickly adjusted to face-to-face dimensionsof valve by using the hydraulically or electrically drivencross-head.- The patented design of the self-sealing adaptersexclude axial compression during the tests, whichensures the test reliability, protects the valves againstdeformation, and extends the valve life.*- All water-wetted parts are corrosion-proof.- The bench can be equipped with replaceable sealingadapters.*- Increased-diameter hoses reduce the time of the valvefilling with the test medium.- Test-bench can be equipped with valve lifting platformsfor valve positioning and support during testing.*

Stands FOR TESTING VALVES DN 10 ... 400 MM (⅜ ... 16 ")

PURPOSE: • testing the body valve for strength and tightness; • door tightness tested; • environmental testing for leaks (including glands, seals); • performance check; • pressure of the valves of the safety gate tightness test; • pressure of safety valves tested. OBJECTS WHICH ARE CHECKED: • gate valves, • ball valves; • stop valves (valves); • check valves; • butterfly doors; • rotary plugs; • safety valves. CHECKING THE CONNECTION OF THE DEVICE TYPE: • flanged (according to ASME B 16.5, GOST 12815, etc.); • soldier ends (in accordance with ASME B 16.25, GOST, etc.). ADVANTAGES: ■ Valve fastening tested, presented on a hydraulic cylinder, separately on the test bench can be equipped with a proportional control system, which, with the exception of axial compression, which is used in the valve body, during fastening of the hydraulic cylinder, during high pressure testing. * ■ Both sides of the door seal do not need to test the reversing valve during testing, which greatly shortens the testing time. ■ The bank is equipped with water, a collection tray. * ■ The dough preparation time is significantly reduced due to the use of high pressure quick-connect hoses. ■ Bank adjusted quickly, face-to-face valve sizes using an electric cross-head actuator. ■ Patented design of auto-sealing adapters to eliminate axial compression during testing, which provides reliability testing, protects the valve from deformation and prolongs valve life. * ■ Water-contacting participants are corrosive. ■ The bank can be equipped with replaceable seal adapters. * ■ Increasing the diameter of the hoses shorten the filling time of the valve using a test. ■ A fold-down top of the cross-head is used to simplify the valve installation procedure before testing. Dough preparation time is greatly reduced due to the use of high pressure quick connect hoses. ■ Fast fastening and centering test of the valve is ensured thanks to the synchronized travel of the guy wires. ■ Valve test, fastening technical is used to provide visual control of vanishing points. ■ It is possible to carry out tests for the door tightness of flange valves with vertical and horizontal axes of the position of the main branch of the pipe with the order of a visual inspection of the damper.

Stands FOR TESTING VALVES DN 15 ... 600 MM (⅔ .... 24 ")

PURPOSE: • immersion testing of gas pipelines, valves; • testing of body parts made of materials for strength and density; • door tightness tested; • Environmental testing for leaks (including glands, seals). OBJECTS WHICH ARE CHECKED: valves • cryogenic; • gate valves, • ball valves; • butterfly valves; • check valves; • rotary plugs. CHECKING THE CONNECTION OF THE DEVICE TYPE: • flanged (according to the standards ASME B 16.5, ASME B 16.47, GOST 12815, etc.); • soldier ends (in accordance with ASME B 16.25, GOST, etc.); * • elements, ends, small size of valves; * • set for sealing all available adapters. * ADVANTAGES: ■ Valve fastening tested, presented on a hydraulic cylinder, separately on the test bench can be equipped with a proportional control system, which, with the exception of axial compression, which is applied in the valve body, during the fastening of the hydraulic cylinder, during high pressure testing. * ■ The clamping block can be equipped with a shutter, radial type or auto -Seal adapters. * ■ Both sides of the door seal during testing do not require testing of the flap valve, which greatly reduces the testing time. ■ The bank is equipped with a special system for removing air. The valve is proven to increase safety, productivity, the reliability of the data obtained and eliminates the need for air by an additional drain. * ■ The bank is equipped with water, the tray for collecting the tank is made of stainless steel. * – due to the use of high pressure quick connect hoses. ■ Bank adjusts quickly, face-to-face valve sizes using hydraulically or electrically operated cross-head overhead. ■ Patented design of auto-sealing adapters to eliminate axial compression during testing, which provides reliability testing, protects the valve from deformation and prolongs valve life. * ■ Water-contacting participants are corrosive. ■ The bank can be equipped with replaceable seal adapters. * ■ Increasing the diameter of the hoses shorten the filling time of the valve using a test. ■ Testing in the Bank can be equipped with a valve platforms lifting valve position and support during the test. *

UNO SOLDERING / OVERLAPPING MACHINES, PIPES, VALVES, PARTS

PURPOSE: • Automated hardening / cover of conveyor sides and elements of diameter from 50 to 1200 mm (2 … 48 ") with or without swing electrodes with submerged arc welding process or in shielded gases (MIG / MAG processes) with wire. ADVANTAGES: The machine is equipped with a forced cooling of the weld block and a set of water-cooled welding head. Electrode pendulum mechanism allows to increase the width of the overlapping seam up to 60 mm (2. "). The advanced construction rotator allows overlapping workpieces in three coordinates (tilt angle and position along the x and y axes). The machine control system is based on an industrial controller, hence allows the operator to set the hardfacing / overlay parameters (vibration amplitude, amplitude, speed, faceplate revolutions, and seam length) via the touch screen on the control panel. ■ The device is equipped with a remote control. ■ Time to release "gas" flow – no more than 10 minutes. ■ Spare parts kit includes a set of tools, wear parts and a first aid kit. ■ Welding of the backlight area. the circumference of the seal of the weld is in the horizontal plane (overlapping seal rings, welding flanges). * ■ The machine achieves a surface hardness of 60 HRC. **

SPSH PIPE GRINDING AND LAINING MACHINES, VALVES DN 50 ... 1000 MM

PURPOSE: • The machines are designed for grinding and lapping the plane of the sealing surfaces of the body and wedges of valves, rear-view mirrors and coils, shut-off valves (valves), safety valves and other flat surfaces. VALVE TYPE: • gate valves; • valve; • safety valve. * VALVE DN: Hard disks: • SPSH-600-N: DN 50 … 600 mm (2 … 24 "); • SPSH-1000-N: DN 300 … 1000 mm (12 … 40 "). Block with two tables and tilted: • SPSH-600-NN: DN 50 … 600 mm (2 … 24 "). Base unit table: • SPSH-300-NN: DN 15 … 300 mm (½ …12"); • SPSH-300-VV: DN 8 … 300 mm (0.3 … 12 ").

RMR WORKSTATION FOR CRANES, MOUNTING / DISMANTLING
PORTABLE MACHINES FOR REPAIR OF GATE VALVES

PURPOSE:. portable machine is designed for grinding and lapping thesealing surfaces of the gate valve trim and wedges withouttheir dismantling from the pipeline.MACHINED-SURFACE TYPES:. sealing surfaces of the gate valve trim and wedges.DN OF VALVE:. 50…250 mm (PUR-1);. 200…600 mm (PUR-2). Тех. спецификации COMPLETE SET:• portable unit;• professional pneumatic (Atlas Copco) and/or electric (Bosch) drives;*• device for mounting on the middle flange;• device for machining the gate valve wedges;• replaceable grinding and lapping discs;• a set of self-adhesive grinding wheels;• air preparation unit with a sleeve for compressed air supply;• plastic case;• set of spindles with the abrasive wheels based on electrocorundum (PUR-1, PUR-2);• set of spindles coated with the boron nitride (PUR-1, PUR-2).

MOBILE WORKSHOPS

PURPOSE: • modular structure of container workshop solutions allows its adoption in accordance with the requirements of customers and climatic conditions of use. Our range of models addresses the most critical valve problems, high pressure repairs for testing, calibration and maintenance of various valve types. OBJECTS WHICH ARE CHECKED: • gate valves, • ball valves; • shut-off valves; • check valves; • safety valves; • control valves. MOBILE WORKSHOP VERSIONS: • PKTBA-MK-1 mobile workshop test valve. • PKTBA-MK-2 mobile valve, test and repair. • PKTBA-MK-3 for mobile fittings and workshops.

Shampoo SLIVA Green GPB glycoprotein balancing "Calendula and Veres" 300 ml

Organic balancing shampoo based on natural extracts, proteins and glycoproteins. No sulfates, no parabens, no artificial fragrances or colors.

Shampoo SLIVA Green GPB glycoprotein balancing "St. John's wort and Sea buckthorn" 300 ml

Organic balancing shampoo based on natural extracts, proteins and glycoproteins. No sulfates, no parabens, no artificial fragrances or colors.

Shampoo SLIVA Green GPB glycoprotein balancing "Chamomile and Birch" 300 ml

Organic balancing shampoo based on natural extracts, proteins and glycoproteins. No sulfates, no parabens, no artificial fragrances or colors.

Shampoo SLIVA Green GPB glycoprotein balancing "Aloe and Rosemary" 300 ml

Organic balancing shampoo based on natural extracts, proteins and glycoproteins. No sulfates, no parabens, no artificial fragrances or colors.

Sugar paste SLIVA Professional "Very Soft" 1000 g

Professional sugar paste for removing unwanted hair. A honey-like transparent paste for depilation in the salon or at home.

Sugar paste SLIVA Professional "Soft" 1000 g

Professional sugar paste for removing unwanted hair. A honey-like transparent paste for depilation in the salon or at home.

Sugar paste SLIVA Professional "Medium" 1000 g

Professional sugar paste for removing unwanted hair. A honey-like transparent paste for depilation in the salon or at home.

Sugar paste SLIVA Professional "Dense" 1000 g

Professional sugar paste for removing unwanted hair. A honey-like transparent paste for depilation in the salon or at home.

Sugar paste SLIVA Professional "Very dense" 1000 g

Professional sugar paste for removing unwanted hair. A honey-like transparent paste for depilation in the salon or at home.

Cover K-1 from the manufacturer

The K-1 strip produced by our company is used exclusively in conjunction with the K-2 lining and S-4 tie as an attachment point for P50 rails to reinforced concrete sleepers ШТ-12, ШТ-27 and NSP 35.10 slabs in the tracks for rolling autotransformers and shunt reactors. Manufactured in accordance with the working drawing 3.407.1-148.2-010 or 407-3-0603.91-KS.I-6 from parts of straightened rolled products, steel grade Vst3. Welding of steel products is carried out according to a developed and controlled technological process, which ensures the required geometric size of the seam and the mechanical property of the welded joint. We manufacture fasteners for railway, crane and rolling tracks of transformers: -43, R-24, R-18, KR-70, KR-80, KR-100, KR-120, KR-140- Clamping bars: P1, P2 in accordance with GOST 24741-81; MS-1, MS-2- Thrust bars: U1, U2, U3 in accordance with GOST 24741-81- Pressure bars PM3 and thrust bars PM3- Fasteners: K-1, K-3, MN-4, MP-1, MP- 2, MP-3, AM-1, AM-2, AM-3, MT-1, bolt T20 and C6, D-1, D-4, D-6, D-13, KR-12, T-19 , stop U1- Shims K-2, MS-3, MS-4- Beams B-1, B-2, D-7, D-8, D-9- Rails P-1, P-2, P-3 , P-4, ZhD-6, ZhD-9- Ties S-1, S-2, S-3, S-4, S-6, S-7- Butt pads for crane rails KR-70/80 (RS3 ), KR-100 (RS4), KR-120 (RS5), KR-140 (RS6) – Overlays of the temperature joint TS3, TS4, TS5, TS6, TS7

Counter-rail bolts SP-237, any diameter and length

We make counter-rail bolts SP-237, M22, M24, M27 of various lengths. – Clamping strips: P1, P2 in accordance with GOST 24741-81; MS-1, MS-2- Thrust bars: U1, U2, U3 in accordance with GOST 24741-81- Pressure bars PM3 and thrust bars PM3- Fasteners: K-1, K-3, MN-4, MP-1, MP- 2, MP-3, AM-1, AM-2, AM-3, MT-1, bolt T20 and C6, D-1, D-4, D-6, D-13, KR-12, T-19 , stop U1- Shims K-2, MS-3, MS-4- Beams B-1, B-2, D-7, D-8, D-9- Rails P-1, P-2, P-3 , P-4, ZhD-6, ZhD-9- Ties S-1, S-2, S-3, S-4, S-6, S-7- Butt pads for crane rails KR-70/80 (RS3 ), KR-100 (RS4), KR-120 (RS5), KR-140 (RS6) – Overlays for the temperature joint TS3, TS4, TS5, TS6, TS7 Tech. Specifications These products are used only on railway facilities where conventional butt bolts, due to their smaller dimensions, do not cope with their task, an example is a turnout. In view of the severance of trade and economic ties with Ukraine, where this product is mass-produced, the delivery has become difficult, or rather practically impossible. Products of our production are made strictly in accordance with GOST, from steel grade 35, strength class 8.8, or from steel grade 40x, strength class 10.9 on modern equipment, by hot stamping. The manufacture of these bolts in the forge of our enterprise includes a rather complex labor-intensive and energy-intensive process, which takes place in stages and consists of punching an oval headrest to a rod, punching a round head, and threading. Each batch of bolts on a special stand undergoes tensile tests, after which, under the strict guidance of quality control inspectors, compliance with the specified dimensions, appearance is checked and delivered to the finished product warehouse.

Counter-rail bolts SP-237, any diameter and length

We make counter-rail bolts SP-237, M22, M24, M27 of various lengths. – Clamping strips: P1, P2 in accordance with GOST 24741-81; MS-1, MS-2- Thrust bars: U1, U2, U3 in accordance with GOST 24741-81- Pressure bars PM3 and thrust bars PM3- Fasteners: K-1, K-3, MN-4, MP-1, MP- 2, MP-3, AM-1, AM-2, AM-3, MT-1, bolt T20 and C6, D-1, D-4, D-6, D-13, KR-12, T-19 , stop U1- Shims K-2, MS-3, MS-4- Beams B-1, B-2, D-7, D-8, D-9- Rails P-1, P-2, P-3 , P-4, ZhD-6, ZhD-9- Ties S-1, S-2, S-3, S-4, S-6, S-7- Butt pads for crane rails KR-70/80 (RS3 ), KR-100 (RS4), KR-120 (RS5), KR-140 (RS6) – Overlays for the temperature joint TS3, TS4, TS5, TS6, TS7 Tech. Specifications These products are used only on railway facilities where conventional butt bolts, due to their smaller dimensions, do not cope with their task, an example is a turnout. In view of the severance of trade and economic ties with Ukraine, where this product is mass-produced, the delivery has become difficult, or rather practically impossible. Products of our production are made strictly in accordance with GOST, from steel grade 35, strength class 8.8, or from steel grade 40x, strength class 10.9 on modern equipment, by hot stamping. The manufacture of these bolts in the forge of our enterprise includes a rather complex labor-intensive and energy-intensive process, which takes place in stages and consists of punching an oval headrest to a rod, punching a round head, and threading. Each batch of bolts on a special stand undergoes tensile tests, after which, under the strict guidance of quality control inspectors, compliance with the specified dimensions, appearance is checked and delivered to the finished product warehouse.

Screed C4 from the manufacturer

Bolt (tie) S-4 is used in conjunction with a K-1 or K-3 lining and a K-2 lining as an attachment point for P50, P65 rails to reinforced concrete sleepers ShT-12, ShT-27 and NSP 35.10 slabs in the tracks for rolling autotransformers … It is manufactured according to the working drawing 3.407.1-148.2-009 or 407-3-0603.91-KS.I-2 from a circle of steel grade Vst3 and is completed with an M22 nut and C22, C30 washers. Prior to installation in a tie or slab, the bolt head and the C22 washer adjacent to the bolt head are coated with PF-170 varnish. After installing the C-4 bolt, the holes in the sleeper are filled with cement mortar of grade 100, observing the design distance between the bolts.We make fasteners for railway, crane and rolling paths of transformers: , R-24, R-18, KR-70, KR-80, KR-100, KR-120, KR-140- Clamping bars: P1, P2 in accordance with GOST 24741-81; MS-1, MS-2- Thrust bars: U1, U2, U3 in accordance with GOST 24741-81- Pressure bars PM3 and thrust bars PM3- Fasteners: K-1, K-3, MN-4, MP-1, MP- 2, MP-3, AM-1, AM-2, AM-3, MT-1, bolt T20 and C6, D-1, D-4, D-6, D-13, KR-12, T-19 , stop U1- Shims K-2, MS-3, MS-4- Beams B-1, B-2, D-7, D-8, D-9- Rails P-1, P-2, P-3 , P-4, ZhD-6, ZhD-9- Ties S-1, S-2, S-3, S-4, S-6, S-7- Butt pads for crane rails KR-70/80 (RS3 ), KR-100 (RS4), KR-120 (RS5), KR-140 (RS6) – Overlays of the temperature joint TS3, TS4, TS5, TS6, TS7 Prices from the manufacturer. Optimal production time. Fast and reliable delivery throughout Russia.

Lining K-2 from the manufacturer.

The K-2 lining is used together with the K-1 or K-3 lining and the S-4 tie as an attachment point for the P50, P65 rails to the reinforced concrete sleepers ShT-12, ShT-27 and NSP 35.10 slabs in the tracks for rolling autotransformers and shunt reactors … Manufactured in accordance with working drawing 3.407.1-148.2-011 or 407-3-0603.91-KS.I-7 from parts of straightened rolled products, steel grade Vst3. The K-2 lining is placed in the transformer track between the transformer sleeper ShT-27 and the P50 or P65 rail, for a more even distribution of the load from the rolling transformer onto the reinforced concrete sleeper. We make fasteners for railway, crane and transformer rolling tracks: R-65, R-50, R-43, R-24, R-18, KR-70, KR-80, KR-100, KR-120, KR-140- Clamping bars: P1, P2 in accordance with GOST 24741- 81; MS-1, MS-2- Thrust bars: U1, U2, U3 in accordance with GOST 24741-81- Pressure bars PM3 and thrust bars PM3- Fasteners: K-1, K-3, MN-4, MP-1, MP- 2, MP-3, AM-1, AM-2, AM-3, MT-1, bolt T20 and C6, D-1, D-4, D-6, D-13, KR-12, T-19 , stop U1- Shims K-2, MS-3, MS-4- Beams B-1, B-2, D-7, D-8, D-9- Rails P-1, P-2, P-3 , P-4, ZhD-6, ZhD-9- Ties S-1, S-2, S-3, S-4, S-6, S-7- Butt pads for crane rails KR-70/80 (RS3 ), KR-100 (RS4), KR-120 (RS5), KR-140 (RS6) – Overlays of the temperature joint TS3, TS4, TS5, TS6, TS7

We make railway dead-end stops

Railway dead-end stop refers to devices that block the path of rolling stock in areas where there is no rail track. They are installed at the end of dead-end tracks and are intended to stop the rolling stock from hitting the wall of the tunnel or from derailing if the driver does not stop the train in time. The dead-end stop must take the hit of the train and thereby stop it. A sand cushion is poured in front of and behind the stop, softening the impact of the rolling stock.

Transformer sleepers ШТ27, ШТ12

We sell sleepers for rolling tracks of transformers: ШТ12 and ШТ27 ШТ27, 250х300х2700, drawing 3.407.1-157.1-18, weight of one tie is 510 kg, at a price of 4100 rubles / piece. ШТ12, 200х200х1200, drawing 3.407.1-157.1-18, weight of one sleeper 225 kg, at a price of 2100 rubles / piece. Transformer sleepers SHT-27 and SHT-12 produced by us will be indispensable in any construction of rail tracks for rolling transformers. And their reliability, the price favorable from many competitors and the location of the warehouse in the very center of Russia will become for you the main decisive argument when purchasing sleepers ShT-27, ShT-12 from VolgaSpetsProfil Group of Companies LLC. We also produce all fasteners for reliable fixing of rails to transformer sleepers, so those interested in our products can purchase everything in one place. Choosing us you are guaranteed to save precious time and money. It is worth noting that transformer sleepers differ in size. Dimensions of ShT-27 are 250x300x2700 mm. The weight of one product is 510.00 kg. at a price of 4100 rubles / piece Dimensions of the ShT-12 are 250x300x1200 mm. The weight of one product is 225.00 kg. at the price of 2,100 rubles / piece. Those. specifications Used in the construction of rail tracks for rolling transformers

Wheat flour of the highest grade

The most refined flour, which is made exclusively from well-refined grains. This flour is characterized by a low gluten content and a large amount of starch. Outwardly, it stands out in white with a slight milky tint. Often used in cooking, as the baked goods are fluffy and porous.

Vest for clay pigeon shooting CLASSIC

Recommended for disciplines TRAP, DOUBLE TRAP. The cut has been modified and, based on 3 years of experience in production and feedback from athletes, the fit of the vest has been significantly improved. It is made of 100% cotton of the highest quality and mesh – 100% polyester. Available for "left-handers".

Whole condensed milk

The permissible composition of condensed milk produced in accordance with GOST 31688-2012: • cow's milk, with the exception of dry milk, the use of which is prohibited; • granulated sugar; • finely crystalline milk sugar for the manufacture of canned milk; • drinking water; • food additives: antioxidants – E300, E301, E303, dehydroquercetin; stabilizers – E339, E331, E340, E332. Characteristics of whole condensed milk with sugar in accordance with GOST 31688-2012: • sweet pure taste with a pronounced taste and smell of pasteurized milk; • uniform viscous consistency in the absence of noticeable crystals of milk sugar (lactose), while a slight sediment of lactose is allowed on the bottom of the container during storage; • white with a cream shade; • mass fraction of moisture no more than 26.5%; • mass fraction of sugar 43.5-45.5%; • mass fraction of milk solids not less than 28 , 5%; • mass fraction of fat not less than 8.5%.

Rapeseed oil refined deodorized premium
Pipes

PP pipe PN 10 D20 * 1.9 L2m

Ferrero rocher sweets

Each candy has a kernel – a hazelnut. It is surrounded, like the core of the planet, by several confectionery layers: nut cream, crunchy waffle, milk chocolate, pieces of hazelnut. The golden wrapper emphasizes the flavor value of any Ferrero Rocher candy. All structural parts of Ferrero Rocher candies are matched like cheese to butter: individually – they are simply delicious, together – represent a masterpiece of confectionery art. The crunchy layer inside creates an appetizing sound that makes you pause to enjoy the smell and taste of chocolate, which colors the candy with the familiar milky brown hue. Dreamy delight accompanies the process of treating each piece of Ferrero rocher. ”Milk chocolate is used in the sweets. Therefore, among the ingredients there are powdered milk and whey. Cocoa butter perfectly complements cocoa powder, filling candies with a chocolate smell. Soy lecithin is needed for viscosity and long-term storage. Nuts are the component that attracts millions of sweet tooths. Well, you can't do without sugar. one confectionery product. For the waffle crust, flour and vegetable oil are used. There is also a vanilla aroma and sodium bicarbonate as a baking powder and a little salt. Sweets are very high in calories, so you should not eat a lot of them. But, sometimes, it is simply necessary to do it. After all, putting Rocher in your mouth, you can feel an unforgettable pleasure, creating a small holiday for yourself. The calorie content of one round piece is 70 kcal. There are 603 kcal in every hundred grams of Rocher. Fats and carbohydrates are balanced: 42.8 g and 44.3 g per 100 g of sweets. There are less proteins: 8.1 g. They are present due to milk components and cocoa. But sweets have vitamins and trace elements. There are no synthetic substances in Ferrero Rocher. But they are perfectly stored for 300 days due to well-chosen components and high-quality workmanship. Sweets successfully store calories and nutrients at home: at a temperature of 18-22 ° C and a humidity of 65%.

Diesel fuel, straight-run gasoline

Diesel fuel TU NikolaevkaSamara regionAuthorized fuel Density 0.827Sulfur 0.2Flash 50Diesel fuel TU Samara RegionBulked Density 0.820Sulfur 0.5Flash 35Straight-run gasoline (Nefras, BGS) Samara and Orenburg regionAutomotive fuelFuel density 0.04About 0.710Sera nine

Soybean meal, the share of crude protein is not less than 52%

Produced as a by-product after processing soybean seeds for oil extraction. Suitable for both young animals and sex and age animals from meat and dairy herds, and is also used to increase egg production in poultry. We recommend buying bulk soybean meal for farms where poultry, pigs, rabbits, sheep and cattle are raised. The energetic nutritional value of such a feed additive of plant origin is in the range of 1.2-1.35 feed units. It is bought for the preparation of compound feed based on it and used in the diet in the following proportions: • for pigs – from 5 to 15%, depending on the feeding period; • for cattle – from 15 to 25% for adult animals and young animals, respectively; • for sheep – 10-20% depending on age • for rabbits – no more than 10%. Soybean meal contains a large amount of easily digestible protein (up to 50%), as well as lysine, phosphorus, vitamins of groups B and E. The use of this additive in the composition of feed enriches the animal body with essential amino acids: tryptophan, histidine, methionine. The introduction of meal into the diet provides a good weight gain (from 8 to 30%), helps to maintain the immunity of animals, improves the quality of meat, milk, eggs. The addition of soybean meal allows you to balance the diet in terms of protein and amino acid composition, as well as increase the energy value of feed. Soy protein is absorbed by almost 80%.

Wheat bran feed

1 kg of wheat bran contains an average of 0.75 feed. units, 8.8-9.2 MJ of metabolic energy, 151 g of digestible protein, 2.0 g of calcium. 9.6 g of phosphorus, etc. Wheat bran is rich in microelements and vitamins of group B. In terms of chemical composition and nutritional value, wheat bran is better than rye and even more so than rice. Wheat bran contains a large amount of phosphorus, more precisely – phytin, an organic substance in a warm aqueous solution that has a laxative effect on the gastrointestinal tract of a human or animal body. Eating dry wheat bran, in contrast, can stop diarrhea. This product accounts for up to 60% of the total mass of compound feed in the diet of animals: for fattening cattle, dairy cows and sheep – 50-60%, for horses, calves, pigs – up to 40%, for young pigs – up to 25%. Loose wheat bran has poor flowability and high values of hygroscopicity – the ability to absorb moisture. Therefore, the recommended storage places are dry, warm, well-ventilated rooms. The shelf life is 1 month. The advantages of the granular form were mentioned above, the shelf life is 1 year. A quick review of the nutritional profile of bran shows that they contain sufficient amounts of essential nutrients. In terms of calorie content, they are similar to diets with an average energy concentration, the protein content in them reaches 15.28%. Bran contains less fiber than forage, but more than traditional high-calorie feed, and because it is based on cereals, it tastes good. Dairy cows can be fed bran up to 4-6 kg per day. Horses are fed only wheat bran up to 30-50% of the norm of oats. Pigs and poultry use less bran nutrients than other animals.

Wellness cosmetics

Prof. Georg Birkmeier NADH® SKIN SERUM – Elite therapeutic mono-serum NADH for skin is an innovative product with a patent-protected formula. Serum NADH is the most delicate comfortable emulsion, colorless and odorless, after application of which the feeling of protection, smoothness and comfort remains. The drug contains only one single component – NADH, but in a very special formula that allows NADH to be transported into the skin, where ATP (energy) and water are produced. This is exactly what your skin needs to stay fresh, healthy and free of wrinkles. Of course, NADH performs all other physiological functions inherent in the NADH molecule in this formula. NADH repairs damaged skin cells, regardless of whether the damage is due to sun exposure, an allergic reaction or incompatibility of any substances. NADH Healing Serum differs from other cosmetic products in a number of advantages. Absolute Benefits Prof. Georg Birkmeier NADH® SKIN SERUM: This is a completely pure biological product! Contains exclusively natural substances. Does not contain preservatives, perfumes, artificial colors, or animal products! • contains only one component – lecithin, which delivers NADC into the skin cells, that is, an allergic reaction to serum is practically excluded • NADH penetrates into cells, • NADC produces energy in cells and water, • NADH restores damaged skin cells, • after applying the medicinal serum NADH, any other cosmetic products can be used. Positive effect Prof. Georg Birkmeier NADH® SKIN SERUM has been clinically proven for the following problems: • aging skin, • age spots • telangiectasias • varicose veins • unclean skin • vitiligo • rosacea • acne and shining. Method of use: apply 1-2 doses from an aerosol can. Prof. Georg Birkmeier NADH® SKIN SERUM on the appropriate area of the skin and massage them with light movements until completely penetrated into the skin once or twice a day. Each vial contains 10 ml of serum and 500 mg of NADX. One dose contains about 16 mg of NADX. A bottle made of special dark glass ensures the preservation of the quality of the serum during the entire shelf life. Shelf life is 2 years.

Natural cosmetic products Otis-Eko

The principles of our work are: – the choice of environmentally friendly and natural products without dilution and with a minimum content of surfactants (where it is really needed), – the availability of cosmetics for the buyer; – flexibility and an individual approach to each client; – Help in advertising products (leaflets , stands, flyers).

Pasta made of durum and soft wheat flour

Pasta is sold in bulk, products are packed in corrugated boxes and polypropylene bags.

WATER PROTECTION
INPUT MODULE
GAS SEPARATOR-DISPERSER

A rotary gas separator-disperser is installed at the pump inlet instead of a gas separator or dispersant in wells with a particularly high gas ratio, where the use of neither a gas separator nor a dispersant ensures stable operation of a submersible centrifugal pump. Characteristics and advantages: • one-piece protective sleeve of the separation chamber is made of thick-walled chromium-nickel stainless steel; sleeves an additional sleeve is pressed in; • the supercavitating wheel has additional protection of the body from mechanical impurities; • the rotor is stabilized by wear-resistant radial bearings; • the base of the gas separator-dispersant is made of corrosion-resistant steel.

VORTEX GAS SEPARATOR

The vortex gas separator is less susceptible to cyclic circular wear of the protective sleeve by mechanical impurities due to the absence of separation drums. Characteristics and advantages: • protective sleeve of the separation chamber is made of thick-walled chromium-nickel stainless steel; • the rotor is stabilized by wear-resistant radial bearings; • end pieces are made of corrosion-resistant steel

ROTOR GAS SEPARATOR

Characteristics and advantages: • the protective sleeve of the separation chamber is made of thick-walled chromium-nickel stainless steel; • the rotor is stabilized by wear-resistant radial bearings; • the base of the gas separator is made of corrosion-resistant steel.

DISPERSANT

The gas-liquid mixture ensures stable operation of the centrifugal pump and reduces its vibration, as well as creates additional head due to the gas-lift effect in the tubing pipes. When lifting fluid along the tubing, free gas is released from the formation fluid, which, expanding, performs additional work to lift the fluid. Characteristics and advantages: • gas-lift effect increases the efficiency of well operation; • stabilization of the pump characteristics and prevention of pump stalling; • reduction of pulsation and vibration liquid flow in the tubing with increased gas content at the inlet; • prevention of gas accumulation in the annulus; • the rotor is stabilized by wear-resistant radial bearings; • the base of the disperser is made of corrosion-resistant steel.

ASYNCHRONOUS ELECTRIC MOTORS

The company "RIMERA-ALNAS" produces standard and high-voltage asynchronous electric motors of size groups from 96 to 180 mm with a power from 12 to 750 kW with a speed control range of 2100 – 4200 rpm. High-voltage asynchronous electric motors are electric motors with increased supply voltage, which have a larger number of smaller conductors of the winding wire in the stator winding compared to standard EMs. Low operating current provides energy savings by reducing heat losses in the cable line. Applications • wells with a high content of solids • wells with a high gas content at the pump intake • wells with increased corrosiveness of the formation fluid • wells with a high temperature of the formation fluid • traditional wells Tech. specifications Characteristics and advantages: • manufacture of stators using PPI-U (M) winding wire with insulation from polyamide-fluoroplastic film "Kapton", "Apical" with heat resistance up to 200 ° C; • vacuum method of impregnating the stator with high-temperature varnish VS-346 or ELPLAST compound -180, 220; • the use of ENMAFLON fluoroplastic tubes as groove insulation of the stator; • the use of axial thrust bearings made of silicon carbide or with a PEEK coating; All threaded connections against the lapel use a sealant of the "Fixator -2.3" brand; • high-temperature version of the current lead elements: o made of PPS-A4 material with an operating temperature of up to 250 ° C; o made of PEEK material with an operating temperature of up to 300 ° C. heat-resistant rubber goods from mixtures resistant to synthetic oils: oRS-3, Ter-10 up to 220 ° C; oAF-15 up to 250 ° C.

VENTILATED ELECTRIC MOTORS

The company "RIMERA-ALNAS" produces high-speed engines of the size group 81 mm with a capacity of 32 to 125 kW and high-voltage motors of the size group 117 mm – from 24 to 140 kW. Engines of the size group 81 mm are used for high-speed electric centrifugal pumps of size groups 2A and 3; size group 117 mm – for standard electric submersible pumps of size groups 5 and 5A. Application area • exploration wells • wells with sidetracks • wells after workover with a reduced inner diameter of the EC • highly deviated and horizontal wells • conventional wells

MODULE WITH COMPRESSION DISPERSING STEPS
SUBMERSIBLE ELECTRIC CENTRIFUGAL PUMPS

Applications • wells with a high content of solids; • wells with a high gas content at the pump intake; • wells with increased corrosiveness of the formation fluid; • wells with a high temperature of the formation fluid; • wells after hydraulic fracturing; • wells after drilling, incl. h. horizontal, sidetracked, exploration and deviated wells; • traditional wells. The RIMERA-ALNAS company produces standard and high-speed pumps with floating stages, pumps of compression or batch assembly of stages with a productivity from 10 to 1550 m3 / day with a speed control range of 2400 – 6000 rpm: • Pumps with stages floating type: impellers are located on the shaft inside the guide vanes and have the ability to move axially by the amount of permissible clearance. axial loads of impellers are transmitted to the pump casing, axial shaft loads are transferred to the axial support of the tread shaft. • Pumps with package assembly of stages: impellers are located on the shaft in several packages and are fixed on the shaft from axial movement. The axial loads of the impeller package are transferred to the angular contact bearings of the pump, the axial loads of the shaft – to the hydrodynamic axial support of the hydraulic protection shaft. wheels are transferred to the hydrodynamic axial support of the hydraulic protection shaft. Those. Specifications Features and Benefits: • Pumps of corrosion-resistant, corrosion-wear-resistant and high-corrosion-wear-corrosion-resistant versions with stage material hardness up to 240 HB • Optimal arrangement of radial bearings along the entire length of the pump section. Radial bearings in pumps with a capacity of more than 250 m3 / day at 50 Hz are built into the working stage; • pumps with floating stages, with batch and compression stage assemblies; • simplified installation of compression-assembled pumps. The contact of the shafts of the pump sections is achieved by an adjusting bolt, which is secured by a coupling against loosening. The bolt adjustment procedure during installation is carried out with a special device without the use of measuring tools; • Corrosion-resistant design of the pump casing, corrosion-resistant coating of the casing or stainless steel casing; • Shafts in the sections are made of high-strength stainless steel or high-alloyed alloys such as Monel or ALLOY. • involute intersectional connection of shafts.

CHECK VALVE
CHECK VALVE
SHELL TO SUBMERSIBLE ELECTRIC MOTOR
BLEEDER VALVE
FREQUENCY CONTROL STATION
OPTIMA DUOS DIRT PROTECTION
SENSOR SECRET TECH UNIVERSAL COVER
CANAL DRAIN COVER
UNIVERSAL SENSOR SMOOTH COVER
UNIVERSAL SENSOR RICE COVER
SENSOR SIGMA UNIVERSAL COVER
VEROPOL PROF VARNISHED COATING
OPTIMA DIRT PROTECTION
VEROPOL STONE VARNISHED COATING
VEROPOL BASE VARNISHED COATING
SPORT COVER Sensor Yoga
UNIVERSAL SENSOR BIT COVER
UNIVERSAL SENSOR AVERS COVER
UNIVERSAL SENSOR STIKS COVER
SENSOR EURO UNIVERSAL COVER

The cover has a T-shaped lock, designed to meet European standards. Thus, on a module measuring 500 * 500 mm, 12 locks are placed, which ensures reliable clamping of the plates even without the use of additional fasteners. Sensor Euro features a new type of surface that resembles tree bark in texture. Thanks to this, the coating has high anti-slip properties. In production, the Sensor Euro modular PVC flooring helps to reduce noise, vibration from operating equipment, dust formation. The coating helps to create striking design solutions. The Sensor Euro surface gently reflects light, creating a cozy matte shine for well-maintained floors. In addition to the above differences, Sensor Euro retains all the useful properties of the Sensor range. High resistance of the material to static and shock loads. Quick and easy installation without additional fasteners and special professional skills. Sensor Euro has an electrical resistance of 3×1011 Ohm cm. Chemical inertness: the coating is resistant to most chemicals, including engine oil and gasoline. The possibility of dismantling, transferring and re-installing the coating. If repair is necessary, it is enough to change only the damaged module, and not to change the entire coating. The coating is recyclable and does not pollute the environment. PlastFactor LLC – production and sale of Sensor Euro flooring at affordable prices.

SENSOR TECH UNIVERSAL COATING

This is a strong, wear-resistant and durable modular PVC tile for premises with a high degree of stress – production halls, warehouses, boxes, hangars, retail premises, garages. The material for the manufacture of tiles is durable, chemically inert, resistant to oils and gasoline, non-combustible PVC. The high strength of the material and the large thickness of the coating module (7 mm and 5 mm) ensure its reliability and durability. Sensor Tech will easily withstand the movement of any equipment: not only trolleys and rollers, but also heavy machines and loads moved by rolling on steel underlay drums, as well as forklifts on studded rubber. The Sensor Tech is shock- and static-resistant, and the 7mm tiles are resistant to turning loads. The Sensor Tech tiles are mounted using a dovetail locking system. It allows you to lay tiles not only in the usual "checkerboard" pattern, but also with an offset. In production, Sensor Tech modular PVC flooring helps to reduce noise, vibration from operating equipment, dust formation. Sensor Tech's ease of installation and dismantling, the ability to re-lay it allows you to transfer the coating from one room to another. If there is a need for repair, then it is enough to replace only the damaged module, and not to change the entire coating. Advantages of the tiles: The floor covering can withstand a static load of 500 tons / m2; The coating does not deteriorate from the movement of forklifts, rockers and other loaded equipment; We give a five-year warranty for Sensor coating, which is confirmed by facilities in operation for more than 10 years. At the same time, the modules will retain their performance and presentable appearance; The products are made of non-combustible raw materials, making the coating self-extinguishing. In order for our managers to calculate the price of Sensor Tech modular floor tiles, leave your contacts in the feedback form, and we will be with you within an hour. we will contact you!

AQUA DRAIN COVER
AQUA DRAIN COVER
SPORTS FLOOR FACTOR SPORT
FACTOR UNIVERSAL COATING
VEROPOL COM VARNISHED COATING
SOTA YOGA SPORTS FLOOR
SENSOR SOTA UNIVERSAL COVER
STREET COVERING BRONEPLAST
Tactile tiles for the visually impaired
Anti-dandruff shampoo MULTICID Professional, 200 ml

Anti-Dandruff Shampoo Multicide Professional is the most effective treatment for dandruff-causing skin conditions and other skin conditions. More than 70% of people in the world experience dandruff problems. Dandruff is caused by fungi and bacteria, the colonies of which are actively growing for various reasons (stress, external influence or infection, etc.). Multicide instantly removes pathogenic microbes from the surface of hair and skin and destroys microbial colonies, preventing them from recovering. Already after several uses (in the absence of permanent external irritants) completely eliminates dandruff problems. The multicide does not dry the skin, does not destroy the epithelium and does not have any side effects (e.g. hair dyeing). When choosing auxiliary components of the shampoo, possible allergic reactions are minimized. Elimination of bacteria and fungi that cause dandruff. Prevention of the development of skin diseases of a fungal nature (seborrhea, various dermatitis, etc.), as well as dermatoses of bacterial etiology. Neutralization of negative skin reactions to the use of cosmetics (in including eczema and other dermatoses).

Shampoo - shower gel 2 in 1 "MULTICID Professional", 450 ml

Shampoo and shower gel MULTICID Professional is a product for daily use that protects against microbes from the environment. Multicide instantly removes pathogenic microbes from the skin surface, while not drying the skin or destroying the epithelium. Shampoo and shower gel has a pleasant aroma. Elimination of viruses. , bacteria and fungi on the surface of the skin. Prevention of the development of skin diseases of a fungal nature, as well as dermatoses of bacterial etiology. Prevention of infectious diseases and counteraction to seasonal epidemics.

Liquid soap (female version) with antibacterial effect MULTICID Professional, 300 ml

Liquid soap (female version) MULTICID Professional is a product for daily use that protects against microbes from the environment. Multicide instantly removes pathogenic microbes from the skin surface, while not drying the skin or destroying the epithelium. The soap has a pleasant aroma. Elimination of viruses, bacteria and fungi on the surface of the skin. Prevention of the development of skin diseases of a fungal nature, as well as dermatoses of bacterial etiology. Prevention of infectious diseases and counteraction to seasonal epidemics.

Liquid soap with antibacterial effect MULTICID Professional, 300 ml

Liquid soap MULTICID Professional is a product for daily use that protects against microbes from the environment. Multicide instantly removes pathogenic microbes from the skin surface, while not drying the skin or destroying the epithelium. The soap has a pleasant aroma. Elimination of viruses, bacteria and fungi on the surface of the skin. .Prevention of the development of skin diseases of a fungal nature, as well as dermatoses of bacterial etiology. Prevention of infectious diseases and counteraction to seasonal epidemics.

Toothbrush disinfectant MULTICID Professional, 100 ml

Means for disinfecting toothbrushes "MULTICID Professional" is a new product that closes the path of infections in the human body. After using the toothbrush, bacteria accumulate and multiply on the pile. The next time it is used, bacteria pose an even greater danger to human health: they enter the oral cavity and are distributed over the surface of the teeth and mucous membranes, which increases the likelihood of infections.Multicide eliminates pathogenic microbes that accumulate on the toothbrush and prevents them from re-entering the human body .Elimination of causative agents of diseases of the oral cavity (herpes, candidiasis, caries, etc.) and reduction of inflammatory processes in case of periodontal disease.

Mouthwash MULTICID Professional, 200 ml

MULTICID Professional mouthwash is an innovative product for the prevention of diseases of the oral cavity and upper respiratory tract. herpes, candidiasis, caries, etc.) and reduction of inflammatory processes in periodontal disease Prevention and treatment of inflammatory processes and complications during the installation and use of fixed and removable structures (implants, brackets, prostheses, crowns, etc.) treatment of diseases of any localization and complications during tooth extraction.

Mouthwash MULTICID Professional, 100 ml

MULTICID Professional mouthwash is an innovative product for the prevention of diseases of the oral cavity and upper respiratory tract. herpes, candidiasis, caries, etc.) and reduction of inflammatory processes in periodontal disease Prevention and treatment of inflammatory processes and complications during the installation and use of fixed and removable structures (implants, brackets, prostheses, crowns, etc.) treatment of diseases of any localization and complications during tooth extraction.

Antiseptic disinfectant for infectious diseases departments, MULTICID, 1000 ml

Application of the "Multicid" agent as an ANTISEPTIC for infectious diseases wards. The MULTICID product is a ready-to-use product and does not require dilution before use. careful processing of the periungual beds and interdigital areas. PARTIAL SANITARY TREATMENT OF THE SKIN COVER. Perform a single treatment: abundantly moisten a cotton swab or napkin (3 ml for each tampon / napkin) and carefully treat the contaminated area of the skin. The exposure time after the end of treatment is 1 minute. TREATMENT OF THE SURGICAL FIELD, including before the introduction of catheters, puncture of the joints. On the eve of the operation, the patient takes a shower (bath), changes the linen. A double treatment is carried out: the skin of the operating field is successively wiped twice with sep