Autel Automotive Diagnostic Tools

Description

Functions Outline

 

1. The Autel MaxiCOM MK808 obd2 scanner read/clear codes for all available systems
2. The diagnostic tool displays live data in text, graph & anlog for easy data review
3. Auto VIN technology automatically identifies the vehicle’s make, model and year
4. Relearns parking brake pad position after replacement
5. The automotive scanner Supports IMMO functions
6. The diagnostic scanner supports forced diessel particulate filter regeneration and injector adjustments
7. The code reader resets Steering Angle Sensor (SAS)
8. The scan tool resets service mileage and service intervals
9. TPMS sensor relearn
10. Supports battery registration and reset

Full Systems Diagnoses

 

Read and erase codes for all available systems using the supported protocols. The tablet type MaxiCOM diagnostic tool is the best way to display live data in text, graph & anelog for easy data review

To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

To diagnose Light System if you see rapid signal blinking or dimming lights.

And many more …

19 Kinds of Special Reset Service Fnctions

 

Oil Reset Service allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

EPB service is important in the maintenance of electronic braking system’s safety and efficiency.

BMS service allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

DPF service specially works for Diessel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

SAS service helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

TPMS service makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.

IMMO the unique function Autel MaxiCOM MK808 has at this price, is mainly used to disable the lost vehicle keys and program a new replacement key fob.

ABS Bleeding ABS brake bleeding to get a firm brake pad after air exhaustion.

And many more …

Complete OBD2 functions

 

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

 

Advanced Hardware

 

Except its widely-used software, the advanced hardware also brings glory to its smooth and fast operation.

Android-based tablet diagnostic tool greatly improves the working efficiency with performance and power optimized multi-core processor.

7 inch touchable LCD screen does a great job in the better user experience; you can directly get what you need with intutive navigation.

32 GB memory is not only an extended storage space but a way to reduce the possible condition of slow response.

Built-in battery has up to 4.5 hours battery life giving you a worry-free operation experience.

Additional Features

 

SHOP MANAGER – You can well manage the workshop information with 3 available functions within this application: Vehicle History, Workshop Information, and Customer Manager. Intutively look up the summarized details.

DATA MANAGER – The best solution for the data related operations, you can store, print, and review the saved files in Image, PDF，Review Data, Apps Uninstall or Data Logging.

REMOTE DESK – you can directly get ad-hoc remote support from Autel via Team Viewer software.

Warranty & Update

 

Full one-year warranty including all online updates and technical support. Updates can improve the Autel MaxiCOM MK808 capabilities and application functionality

Specification

 

Recommended Use: Indoor

Operating System: AndroidTM 4.4.4

Processor : Cortex-A9 processor (1.5 GHz)

Memory: 32GB

Display: 7-inch LCD capacitive touchscreen with 1024×600 resolution

Connectivity: Mini USB 2.0,USB 2.0,Wi-Fi,Micro SD card (supports up to 32GB)

Sensors：Ambient light sensor for brightness auto adjust

Audio Input/Output：Input: N/A

Output: Beep

Power and Battery：3.7 V/3200 mAh lithium-polymer battery

Charges via 5 VDC power supply

Tested Battery Life：Around 4.5 hours of continuous use

Battery Charging Input：5 V/1.5 A

Power Consumption：500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V

Operating Temp.：0 to 55°C(14 to 131°F)

Storage Temp.：-20 to 60°C (-4 to 140°F)

Operating Humidity：5% – 95% non-condensing

Dimensions (W x H x D)：237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”)

Net Weight：788 g (2.42 lb.)

Package List

 

Main Unit

USB External Power Adapter

Main Cable

Mini USB Cable

Carry Case

User Manual

Quick Reference Guide