Conveyor collapsible metal detector ERGUARD DCM

Conveyor collapsible metal detector ERGUARD DCM is designed to detect inclusions of ferrous, non-ferrous metals and stainless steel in bulk materials transported by a belt conveyor. The demountable design during installation allows you not to modify the conveyor, not to disconnect the belt, to carry out installation within a few hours. • High sensitivity when detecting metal inclusions The ERGUARD DCM metal detector is superior in sensitivity to the ERGUARD SCM model and provides maximum sensitivity when detecting inclusions of ferrous metals with a particle size of 2 mm or more, non-ferrous metals – from 4 mm, stainless steel – from 4 mm. The high sensitivity allows the detector to be configured to protect the equipment from wear and to avoid false alarms and off-target line stops. The stated values are obtained under ideal conditions and may vary depending on the size of the aperture, the operating frequency of the detector, the unique properties of the product, the position of the inclusions in the flow and the production conditions. • Continuous monitoring When metal inclusions are detected, the metal detector gives a sound / light signal and, depending on the Customer's desire, stops the conveyor, marks or removes the contaminated product from the conveyor belt using a reject device. The sensor has a UHL1 version (ambient temperature from -35 ° From up to + 40 ° C), which allows you to work outdoors in all weather conditions. • Protection of technological equipment from breakdowns and premature wear. equipment with all the resulting financial losses. • Intuitive Touch Screen control The control panel is a 7-inch high-definition touch screen with an intuitive user interface in Russian: there are 3 levels of access to the equipment settings (worker, engineer, service specialist) for protection from unauthorized access. • Storing up to 10 materials. Individual settings for a specific material are saved in the system memory, designed for 10 positions. • Compliance with industrial safety requirements. The equipment meets the requirements of the technical regulations of the Customs Union TR CU 004/2011 "On the safety of low-voltage equipment" 020/2011 "Electromagnetic compatibility of technical equipment". All required certificates are included in the package.