Conveyor non-separable metal detector ERGUARD CM

Highly sensitive conveyor metal detector ERGUARD CM with non-separable housing is designed for quality control and safety inspection of raw materials, semi-finished products and finished products transported by a belt conveyor. The CM metal detector in an extended configuration comes with a built-in conveyor and does not require additional line re-equipment. Installation is carried out within a few hours. • High sensitivity for detecting metal inclusions The ERGUARD CM metal detector significantly exceeds the sensitivity of the ERGUARD DCM, SCM models and provides maximum sensitivity for detecting inclusions of ferrous metals with a size of 0.5 mm, non-ferrous metals – from 1 mm, stainless steel – from 1 mm. High sensitivity allows the detector to be configured to protect equipment from wear and to avoid false alarms and off-target line stops. The specified values are obtained under ideal conditions and may vary depending on the size of the aperture, the operating frequency of the detector, the unique properties of the product, the position of the inclusions in the flow and production conditions. When metal inclusions are detected, the metal detector gives a sound / light signal and, depending on the customer's desire, stops the conveyor, marks or removes the contaminated product from the conveyor belt using a rejection device. The sensor has the UHL4 version (ambient temperature – 60 ° C / + 40 ° C), which allows operation in a wide temperature range • Quality and safety control of the product Highly sensitive metal detectors ERGUARD CM are used primarily as control equipment for a thorough check of the safety of raw materials, semi-finished products and finished products • Protection of technological equipment from breakdowns and premature wear. The conveyor metal detector ERGUARD CM allows to reduce wear, prevent damage and downtime of crushing and grinding equipment with all the resulting financial losses. • Intuitive Touch Screen control The control panel is a 7-inch touchscreen high-definition screen with an intuitive user interface in Russian: there are 3 levels of access to the equipment settings (worker, engineer, service specialist) to protect against unauthorized access. designed for 10 positions. • Compliance with industrial safety requirements The equipment meets the requirements of the technical regulations of the Customs Union TR CU 004/2011 "On the safety of low-voltage equipment", TR CU 020/2011 "Electromagnetic capacity of technical means ". All required certificates are included in the package.