Eddy current magnetic separator ERGA SMVT-E5

The magnetic eddy current separator ERGA SMVT-E5 ensures the extraction of small particles of non-ferrous metals from non-conductive fractions during the processing of raw materials. Indispensable for obtaining additional profit and unalloyed materials from MSW, waste cable or plastic, electronic and electrical equipment, cullet, scrap, tires, chips, slags. • Highly efficient magnetic system based on NdFeB rotation up to 5000 rpm and increased induction on the surface of the belt make it possible to efficiently extract particles of non-ferrous metals and their alloys from 0.3 mm. The eccentric position of the rotor allows fine-tuning the separation of the product, as well as avoiding the accumulation of magnetic particles under the belt, which prevents breakage The unique NdFeB magnet system ensures long efficient operation. The guaranteed period of preservation of the properties of magnetic systems, subject to observance of the operating rules, is 10 years • Separation / cleaning efficiency up to 99.8% Individual separation mode is selected depending on the source material. The unique patented system of knives – dividers with fine adjustment of the position contributes to a clear separation of bulk materials into three streams: conductive, non-conductive and weakly magnetic. ERGA SMVT-E5 provides maximum recovery of conductive fraction with particle size from 0.3 mm with separation and purification efficiency of the starting material up to 99, 8% • Intuitive Touch Screen and Ergonomic Design Fully digital operation is possible from the control panel, which is a 7-inch high-definition touchscreen with an intuitive user interface. In addition to adjusting the main operating parameters of the product, it is possible to save the settings of the separation parameters for each type of material. The modern design of the SMVT-E5 separator of non-ferrous metals allows it to be easily integrated into the technological line. inclusions under the tape. The simple design of the bearing assemblies increases the reliability and also guarantees the maintainability of the magnetic rotor, which reduces equipment downtime and associated costs. The specialists of NPO ERGA develop and manufacture SMVT-E5 according to the requirements of the technical specification. Strongly magnetic inclusions must be removed from the separation materials by suspended iron separators SMPR or SMPA, pulley iron separators SMB before being fed to eddy current magnetic separators.