Prophylactic additive "TRIBOGREEN" Epilam – internal combustion engines for cars

It is used by adding it to the oil, followed by stirring (shaking). Consumption: 1-3% of the working volume of the oil. Recommended application temperature in oil is within the range: +16 ° С… + 90 ° С in a warm engine. Immediately after adding the composition, drive the car for 20-25 minutes in normal operation. After the end of the procedure, the car can be used as usual. RECOMMENDATIONS: It is not recommended to add to oils, greases or aggregates containing metal particles, ceramic particles, geomodifiers of friction or additives containing them (aluminum, magnesium, iron, zinc, nickel, graphite, molybdenum, tungsten, serpentinite, etc.). • Prevents the formation of deposits • Does not harm catalytic converters • Increased service life • Protection under increased loads • Facilitated starting and protection during "cold start" • Fuel savings • Reduced vibration and noise • Improved extreme pressure properties / elimination of dry (oil-free) friction • Not there is a chemical effect on rubber goods, plastics, composites (gaskets, oil seals, etc.) Certification • TU 2412-002-13868195-2012; • Certificate of conformity (Nano-certification) • • Safety data sheet • Certificate ISO Tech. specifications – Maximum load on scuffing – GNU GOSNITI UTSM-1 – 140Nm – Chemical resistance – GOST 9403-80 – METHOD A – Withstands – Density at 20 ° С (on average) – GOST 3900 – 08-1.3kg / m³ – Sulphated ash content (on average) – GOST 12417 – 0.051% – Flash point in an open crucible – GOST 4333 – More than 100 ° С – Pour point – GOST 20287 – Below minus 48 ° С – Alkaline number – GOST 11362 – less than 0.05 Mg