Stands FOR TESTING VALVES DN 15 … 600 MM (⅔ …. 24 ")

PURPOSE: • immersion testing of gas pipelines, valves; • testing of body parts made of materials for strength and density; • door tightness tested; • Environmental testing for leaks (including glands, seals). OBJECTS WHICH ARE CHECKED: valves • cryogenic; • gate valves, • ball valves; • butterfly valves; • check valves; • rotary plugs. CHECKING THE CONNECTION OF THE DEVICE TYPE: • flanged (according to the standards ASME B 16.5, ASME B 16.47, GOST 12815, etc.); • soldier ends (in accordance with ASME B 16.25, GOST, etc.); * • elements, ends, small size of valves; * • set for sealing all available adapters. * ADVANTAGES: ■ Valve fastening tested, presented on a hydraulic cylinder, separately on the test bench can be equipped with a proportional control system, which, with the exception of axial compression, which is applied in the valve body, during the fastening of the hydraulic cylinder, during high pressure testing. * ■ The clamping block can be equipped with a shutter, radial type or auto -Seal adapters. * ■ Both sides of the door seal during testing do not require testing of the flap valve, which greatly reduces the testing time. ■ The bank is equipped with a special system for removing air. The valve is proven to increase safety, productivity, the reliability of the data obtained and eliminates the need for air by an additional drain. * ■ The bank is equipped with water, the tray for collecting the tank is made of stainless steel. * – due to the use of high pressure quick connect hoses. ■ Bank adjusts quickly, face-to-face valve sizes using hydraulically or electrically operated cross-head overhead. ■ Patented design of auto-sealing adapters to eliminate axial compression during testing, which provides reliability testing, protects the valve from deformation and prolongs valve life. * ■ Water-contacting participants are corrosive. ■ The bank can be equipped with replaceable seal adapters. * ■ Increasing the diameter of the hoses shorten the filling time of the valve using a test. ■ Testing in the Bank can be equipped with a valve platforms lifting valve position and support during the test. *