Tower Emergency lighting installation

Emergency lighting installation Light Tower or as they are called "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as carrying out night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 600 W. 3) Luminous flux 48,000 – 120,000 lm. It is possible to install two or more lamps. 4) Compressor with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) The time of inflation of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15 – 20 minutes 9) Wind resistance (with stretch marks) up to 20 m / s 10) Climatic version – U11) Location category according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 17677