Tower Emergency lighting installation

Emergency lighting installation Light Tower or as they are called "Light pole" is designed for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant; 2) Light source- High pressure gas discharge lamp DNaT, DNaZ, DRI with a capacity of 600 W.; 3) Luminous flux – 48,000 – 120,000 lm. Installation of two or more lamps is possible.; 4) Compressor – with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters per minute, with an overpressure of 10,000 – 14,000 Pa.; 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5 m; 7) Total weight – 65 kg. Weight may vary depending on the configuration; 8) The time of inflation of the fabric cylinder is 1 minute, the time of full ignition of the lamp is 5 minutes, it is recommended to turn on the lamp again after 15 – 20 minutes; 9) Wind resistance (with stretch marks) – up to 20 m / s ; Climatic modification – U; 10) Category of placement – according to GOST 15150; 11) Degree of protection – IP 65/44; 12) Class of protection against electric shock – II; 13) Light distribution – class P according to GOST 17677.