Light Tower with Generator

Emergency lighting installation "Light tower" ("Light pillar", pillar of the Ministry of Emergency Situations, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at mass events, as well as during night works in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 400 W. 3) Luminous flux – 48,000 – 120,000 lm. It is possible to install two or more lamps. 4) Compressor – with a capacity of 150 to 1200 W, with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600 × 460 × 500 mm … (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 5-7 m. 7) Total weight – 65 kg. (Weight may vary depending on the configuration). 8) The time of inflation of the fabric cylinder is 1 minute, the time of full lighting of the lamp is 5 min. sec10) Climatic modification – U11) Category of placement – according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 17677 Resource of fan brushes – 500 hours, Fan, fabric cylinder and air filter – 1000 hours. Illuminated area up to 15000 m2.