Light Tower with Generator

Emergency lighting installation "Light tower" ("Light pillar", pillar of the Ministry of Emergency Situations, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at mass events, as well as during night works in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 600 W. 3) Luminous flux 48,000 – 120,000 lm. Installation of two or more lamps is possible. 4) Compressor with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters / min, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600 × 460 × 500 mm. (dimensions may vary depending on the type of installation) 6) Height of installation in working condition – 5-7 m 7) Total weight – 65 kg (Weight may vary depending on the configuration) 8) Inflation time of the fabric cylinder 1 minute , the time of full lighting of the lamp is 5 min., it is recommended to turn on the lamp again after 15 – 20 min. 9) Wind resistance (with stretch marks) up to 20 m / s 10) Climatic modification – U11) Placement category according to GOST 1515012) Degree of protection – IP 65/4413 ) Class of protection against electric shock – II14) Light distribution – class P according to GOST 1767715) Resource of fan brushes – 500 hours, fan, fabric cylinder and air filter – 1000 hours. 16) The design of the installation allows illuminating an area of up to 20 thousand m2.