Profile pipe bender TV-2 Manual

The machine is used for rolling along the radius of rectangular pipes up to 50×25 and 40×40, strips, bars with a minimum bending radius of 150 mm. It is equipped with retaining rings for fixing the profile. It has a great advantage over the TV-1 pipe bender due to the equipment of the profile bending chain transmission and the use of two shafts when rolling the profile. Over time, it turned out that the middle (pressure) roller overgrown with furrows during intensive work, which affects the quality of the profile rolling. Since May 2015, it was decided to subject the middle roller to HFC hardening, and to provide additional washers on the sides in order to prevent the roller from rubbing against the body. Changes have also been adopted since November 2017 by equipping with a measuring scale and counter-nuts with which you can work according to a template, that is, to get exactly the same bend with an error of 1 mm. Those. specifications Overall dimensions500x200x400 mm Weight 22 kg Drive roller2 grooved, hardened Bearings7 pcs (closed) Width adjustment yes, retaining rings Drive chain for 2 rollers Screw material ST-40X steel, reinforced thread Roller material HFC-hardened steel ST-40X