Stands FOR TESTING VALVES DN 10 … 400 MM (⅜ … 16 ")

PURPOSE: • testing the body valve for strength and tightness; • door tightness tested; • environmental testing for leaks (including glands, seals); • performance check; • pressure of the valves of the safety gate tightness test; • pressure of safety valves tested. OBJECTS WHICH ARE CHECKED: • gate valves, • ball valves; • stop valves (valves); • check valves; • butterfly doors; • rotary plugs; • safety valves. CHECKING THE CONNECTION OF THE DEVICE TYPE: • flanged (according to ASME B 16.5, GOST 12815, etc.); • soldier ends (in accordance with ASME B 16.25, GOST, etc.). ADVANTAGES: ■ Valve fastening tested, presented on a hydraulic cylinder, separately on the test bench can be equipped with a proportional control system, which, with the exception of axial compression, which is used in the valve body, during fastening of the hydraulic cylinder, during high pressure testing. * ■ Both sides of the door seal do not need to test the reversing valve during testing, which greatly shortens the testing time. ■ The bank is equipped with water, a collection tray. * ■ The dough preparation time is significantly reduced due to the use of high pressure quick-connect hoses. ■ Bank adjusted quickly, face-to-face valve sizes using an electric cross-head actuator. ■ Patented design of auto-sealing adapters to eliminate axial compression during testing, which provides reliability testing, protects the valve from deformation and prolongs valve life. * ■ Water-contacting participants are corrosive. ■ The bank can be equipped with replaceable seal adapters. * ■ Increasing the diameter of the hoses shorten the filling time of the valve using a test. ■ A fold-down top of the cross-head is used to simplify the valve installation procedure before testing. Dough preparation time is greatly reduced due to the use of high pressure quick connect hoses. ■ Fast fastening and centering test of the valve is ensured thanks to the synchronized travel of the guy wires. ■ Valve test, fastening technical is used to provide visual control of vanishing points. ■ It is possible to carry out tests for the door tightness of flange valves with vertical and horizontal axes of the position of the main branch of the pipe with the order of a visual inspection of the damper.