Emergency lighting installation

Emergency lighting installation "Light pole" (EMERCOM pole, light tower) is intended for emergency deployment on the ground in case of natural and man-made disasters, in case of unauthorized switching off of lighting, to illuminate large areas at public events, as well as during night work in industry and construction in hard-to-reach places without the use of expensive equipment and qualified personnel. Those. specifications Technical characteristics: 1) Power supply – Single-phase AC power grid with a voltage of 220 V, 50 Hz, two-phase AC power grid with a voltage of 380 V, 50 Hz or from an autonomous power plant 2) Light source – High pressure gas discharge lamp DNaT, DNaZ, DRI with a power of 400 W. 3) Luminous flux – 48,000 – 120,000 lm. Installation of two or more lamps is possible. 4) Compressor – with a capacity of 150 to 1200 W., with a capacity of 2.5 – 3.5 cubic meters per minute, with an overpressure of 10,000 – 14,000 Pa. 5) Dimensions – 600x450x500 mm. (dimensions may vary depending on the selected type of installation). 6) Height of the installation in working condition – 7 m. 7) Total weight – 65 kg. Weight may vary depending on the configuration. 8) Inflation time of the fabric cylinder – 1 minute, the time of full lighting of the lamp – 5 min. version – U11) Category of placement according to GOST 1515012) Degree of protection – IP 65/4413) Class of protection against electric shock – II14) Light distribution – class P according to GOST 1767715) Resource of fan brushes – 500 hours, fan, fabric cylinder and air filter – 1000 hours. 16) Illuminated area up to 15000 m2.